Cracking Mechanism of Corroded Reinforced Concrete Column Based on Acoustic Emission Technique
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 4
Abstract
The Acoustic Emission (AE) technique is applied to study the failure mode, damage evolution process, and cracking mechanism of reinforced concrete (RC) columns under the coupling effect of exterior compression load and interior reinforcement corrosion. AE signals are collected from different loading stages for corroded and uncorroded RC column specimens. Parameter analyses are conducted to analyze the peak frequency, energy distribution, and phase parameters used to achieve the general changing conditions of AE signals. Fast Fourier Transform is applied to reveal the time-variant rules of signal frequency and energy in different damage stages. Discrete Wavelet Transform is used for a better understanding of the local time-frequency properties of the non-stationary AE signals and optimally interprets the damage evolution process of the RC structure. Results show that the peak frequency has a 3-layered distribution; an obvious “double-peak” trend of the energy distribution indicates two cracking mechanisms: steel/concrete interface damage and aggregate/cement damage. The damage process consists of four stages: micro-crack formation, micro-crack development, crack expansion, and cracking failure. The corrosion behavior remarkably influences the energy distributions of the two cracking mechanisms, the characteristics of the spectra in different stages, and the damage evolution process inside the RC columns.
Practical Applications
This paper studies the failure mode, damage evolution process, and cracking mechanism of reinforced concrete (RC) columns under the coupling effect of exterior compression load and interior reinforcement corrosion via AE signal analysis. The energy distribution and spectral characteristics show significant differences among different cracking stages. Moreover, those important properties and the damage evolution process are also remarkably affected by the corrosion behavior of the steel reinforcement. The practical meaning of those research outcomes are to provide theoretical supports for the application of AE techniques in the health monitoring of RC structures. The changes in the key properties of AE signals measured and analyzed can be used to capture the state changes and locate the cracking stage, which provides important evidence for the safety evaluation of RC structures.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The research work was supported in part by Natural Science Foundation of Zhejiang Province (Grant Nos. LR21E080002 and LZ20E080003) and National Natural Science Foundation of China (Grant Nos. 51978620 and 51908503). Opinions and findings presented are those of the authors and do not necessarily reflect the views of the sponsors.
References
Aggelis, D. G., T. Shiotani, S. Momoki, and A. Hirama. 2009. “Acoustic emission and ultrasound for damage characterization of concrete elements.” ACI Mater. J. 106 (6): 509–514. https://doi.org/10.14359/51663333.
Duhamel, P., and M. Vetterli. 1990. “Fast Fourier transforms: A tutorial review and a state of the art.” Signal Process. 19 (4): 259–299. https://doi.org/10.1016/0165-1684(90)90158-U.
Fu, C. Q., X. Jin, H. Ye, and N. Jin. 2015. “Theoretical and experimental investigation of loading effects on chloride diffusion in saturated concrete.” J. Adv. Concr. Technol. 13 (1): 30–43. https://doi.org/10.3151/jact.13.30.
Fu, C. Q., Y. Ling, and K. Wang. 2020. “An innovation study on chloride and oxygen diffusions in simulated interfacial transition zone of cementitious material.” Cem. Concr. Compos. 110 (Jul): 103585. https://doi.org/10.1016/j.cemconcomp.2020.103585.
Gong, N., S. Hu, X. Chen, X. Fan, and X. Cai. 2020. “Fracture behavior and acoustic emission characteristics of reinforced concrete under mixed mode I-II load conditions.” Theor. Appl. Fract. Mech. 109 (Oct): 102770. https://doi.org/10.1016/j.tafmec.2020.102770.
Haq, M., S. Bhalla, and T. Naqvi. 2020. “Fatigue damage monitoring of reinforced concrete frames using wavelet transform energy of PZT-based admittance signals.” Measurement 164 (Nov): 108033. https://doi.org/10.1016/j.measurement.2020.108033.
Khamedi, R., A. Fallahi, and A. R. Oskouei. 2010. “Effect of martensite phase volume fraction on acoustic emission signals using wavelet packet analysis during tensile loading of dual phase steels.” Mater. Des. 31 (6): 2752–2759. https://doi.org/10.1016/j.matdes.2010.01.019.
Kocur, G. K., E. H. Saenger, C. U. Grosse, and T. Vogel. 2016. “Time reverse modeling of acoustic emissions in a reinforced concrete beam.” Ultrasonics 65 (Feb): 96–104. https://doi.org/10.1016/j.ultras.2015.10.014.
Ohno, K., and M. Ohtsu. 2010. “Crack classification in concrete based on acoustic emission.” Constr. Build. Mater. 24 (12): 2339–2346. https://doi.org/10.1016/j.conbuildmat.2010.05.004.
Patel, S. S., A. Chourasia, S. K. Panigrahi, S. K. Bhattacharyya, and J. Parashar. 2018. “A study on efficacy of wavelet transform for damage identification in reinforced concrete buildings.” J. Vib. Eng. Technol. 6 (2): 127–138. https://doi.org/10.1007/s42417-018-0023-6.
Prajna, K., and C. K. Mukhopadhyay. 2020. “Fractional Fourier transform based adaptive filtering techniques for acoustic emission signal enhancement.” J. Nondestr. Eval. 39 (14): 1–15. https://doi.org/10.1007/s10921-020-0658-6.
Prem, P. R., M. Verma, and P. S. Ambily. 2021. “Damage characterization of reinforced concrete beams under different failure modes using acoustic emission.” Structures 30 (Apr): 174–187. https://doi.org/10.1016/j.istruc.2021.01.007.
Qu, H., T. Li, J. A. Cain, and G. Chen. 2020. “Early detection of wire fracture in 7-wire strands through multiband wavelet analysis of acoustic emission signals.” Eng. Struct. 207 (Mar): 110227. https://doi.org/10.1016/j.engstruct.2020.110227.
Sagasta, F., M. E. Zitto, R. Piotrkowski, A. B. Climent, E. Suarez, and A. Gallego. 2018. “Acoustic emission energy b-value for local damage evaluation in reinforced concrete structures subjected to seismic loadings.” Mech. Syst. Signal Process. 102 (Mar): 262–277. https://doi.org/10.1016/j.ymssp.2017.09.022.
Shah, S. G., and J. M. Kishen. 2012. “Use of acoustic emissions in flexural fatigue crack growth studies on concrete.” Eng. Frac. Mech. 87 (Jun): 36–47. https://doi.org/10.1016/j.engfracmech.2012.03.001.
Shahid, K. A., N. M. Bunnori, M. A. Johari, M. H. Hassan, and A. Sani. 2020. “Assessment of corroded reinforced concrete beams: Cyclic load test and acoustic emission techniques.” Constr. Build. Mater. 233 (Feb): 117291. https://doi.org/10.1016/j.conbuildmat.2019.117291.
Tan, S. W., S. Qin, and B. Tang. 2001. “Time-frequency characteristic of walvelet base and its application transient signal detection.” [In Chinese.] J. Chongqing Univ. (Nat. Sci. Ed.). 24 (2): 12–17. https://doi.org/10.11835/j.ssn.582X.2001.02.004.
Xargay, H., M. Ripani, P. Folino, N. Núñez, and A. Caggiano. 2021. “Acoustic emission and damage evolution in steel fiber-reinforced concrete beams under cyclic loading.” Constr. Build. Mater. 274 (Mar): 121831. https://doi.org/10.1016/j.conbuildmat.2020.121831.
Xu, J., W. Wang, Q. Han, and X. Liu. 2020. “Damage pattern recognition and damage evolution analysis of unidirectional CFRP tendons under tensile loading using acoustic emission technology.” Compos. Struct. 238 (Apr): 111948. https://doi.org/10.1016/j.compstruct.2020.111948.
Zaki, A., H. K. Chai, A. Behnia, D. G. Aggelis, J. Y. Tan, and Z. Ibrahim. 2017. “Monitoring fracture of steel corroded reinforced concrete members under flexure by acoustic emission technique.” Constr. Build. Mater. 136 (Apr): 609–618. https://doi.org/10.1016/j.conbuildmat.2016.11.079.
Zitto, M. E., R. Piotrkowski, A. Gallego, F. Sagasta, and A. B. Climent. 2015. “Damage assessed by wavelet scale bands and b-value in dynamical tests of a reinforced concrete slab monitored with acoustic emission.” Mech. Syst. Signal Process. 60–61 (Aug): 75–89. https://doi.org/10.1016/j.ymssp.2015.02.006.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Apr 16, 2022
Accepted: Aug 4, 2022
Published online: Jan 28, 2023
Published in print: Apr 1, 2023
Discussion open until: Jun 28, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Xueliang Rong, Anqiao Xie, Pin Zhao, Sui Wang, Xinxin Wei, Damage Detection and Evaluation of Stud Connectors for Composite Girder Bridge Using Acoustic Emission, Journal of Bridge Engineering, 10.1061/JBENF2.BEENG-6559, 29, 3, (2024).
- Ning Yang, Muhammad Akbar, Qing Wu, Zahoor Hussain, Wajahat Sammer Ansari, Microstructural Analysis of Corrosion Products of Steel Rebar in Coral Aggregate Seawater Concrete, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-16193, 35, 12, (2023).
- Zheng Dong, Chuanqing Fu, Chentao Lu, Xosé Ramón Nóvoa, Hailong Ye, Effect of Stress on the Critical Chloride Content of Steel Bar in Simulated Concrete Pore Solution, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-16037, 35, 10, (2023).
- Bo Sun, Hangkai Zhou, Wensen Cao, Weimin Chen, Bin Chen, Yizhou Zhuang, Vertical and Horizontal Combined Algorithm for Missing Data Imputation in Bridge Health Monitoring System, Journal of Bridge Engineering, 10.1061/JBENF2.BEENG-5996, 28, 6, (2023).