Effectiveness of Concrete Elements Strengthening through PBO-FRCM Confinement with Various Types of Anchorage
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 1
Abstract
This paper presents the results of experimental research on PBO (P-phenylene benzobisoxazole)-FRCM (fabric-reinforced cementitious matrix)-confined concrete elements with a variously shaped end PBO mesh overlap. In FRCM systems, the composite is bonded with the concrete using mortar as opposed to FRP (fiber-reinforced polymers) systems, and such bonding is effected using epoxy resin. Twelve confined concrete elements were tested. They were divided into four series, each comprising three elements. The elements were confined with a single layer of PBO mesh but differed in the shape (geometry) of the composite’s end overlap. The results of the tests, during which the effect of the shape of the end mesh overlap on the values and distribution of transverse (circumferential) strains was examined, are presented. On this basis, an optimal way of constructing the PBO-FRCM confinement of concrete elements is proposed. The mimicking of the inner steel winding concept in the outer confinement made of PBO mesh turned out to be the most effective. The transfer of the ends of the overlap to the element’s two ends also improves the load capacity of the support zones in which compressive stresses are concentrated.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
References
ACI (American Concrete Institute). 2013. Guide to design and construction of externally bonded fabric-reinforced cementitious matrix (FRCM) systems for repair and strengthening concrete and masonry structures. ACI 549.4e13. Farmington Hills, MI: ACI.
Bruckner, A., R. Ortlepp, and M. Curbach. 2008. “Anchoring of shear strengthening for T-beams made of textile reinforced concrete (TRC).” Mater. Struct. 41 (2): 407–418. https://doi.org/10.1617/s11527-007-9254-9.
Carozzi, F. G., and C. Poggi. 2015. “Mechanical properties and debonding strength of fabric reinforced cementitious matrix (FRCM) systems for masonry strengthening.” Composites, Part B 70 (Mar): 215–230. https://doi.org/10.1016/j.compositesb.2014.10.056.
CEN (European Committee for Standardization). 2002. Cement—Part 1: Composition, specifications and conformity criteria for common cements. EN 197-1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2009. Testing hardened concrete. Part 3: Compressive strength of test specimens. EN 12390-3. Brussels, Belgium: CEN.
Chen J. F., J. Ai, and T. J. Stratford. 2007. “FRP strains in FRP wrapped columns: A parametric study.” In Proc., 8th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8). Edinburgh, UK: Univ. of Edinburgh.
Chen, J. F., S. Q. Li, L. A. Bisby, and J. Ai. 2011. “FRP rupture strains in the split-disk test.” Composites, Part B 42 (4): 962–972. https://doi.org/10.1016/j.compositesb.2010.12.015.
Colajanni, P., F. De Domenico, A. Recupero, and N. Spinella. 2014a. “Concrete columns confined with fibre reinforced cementitious mortars: Experimentation and modeling.” Constr. Build. Mater. 52 (Feb): 375–384. https://doi.org/10.1016/j.conbuildmat.2013.11.048.
Colajanni, P., M. Fossetti, and G. Macaluso. 2014b. “Effects of confinement level, cross-section shape and corner radius on the cyclic behavior of CFRCM confined concrete columns.” Constr. Build. Mater. 55 (Mar): 379–389. https://doi.org/10.1016/j.conbuildmat.2014.01.035.
Isaac, M. D., and L. Ori. 2006. Engineering mechanics of composite materials. Oxford, UK: Oxford University Press.
Karbhari, V. M., and I. Howie. 1997. “Effect of composite wrap architecture on strengthening of concrete due to confinement: II-Strain and damage effects.” J. Reinf. Plast. Compos. 16 (11): 1039–1063. https://doi.org/10.1177/073168449701601105.
Lam, L., and J. G. Teng. 2012. “Strength models for fiber-reinforced plastic-confined concrete.” J. Struct. Eng. 128 (5): 612–623. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:5(612).
Marcinczak, D., T. Trapko, and M. Musiał. 2019. “Shear strengthening of reinforced concrete beams with PBO-FRCM composites with anchorage.” Composites, Part B 158 (Feb): 149–161. https://doi.org/10.1016/j.compositesb.2018.09.061.
Mirmiran, A., M. Shahawy, M. Samaan, and H. El Echary. 1998. “Effect of column parameters on FRP-confined concrete.” J. Compos. Constr. 2 (4): 175–185. https://doi.org/10.1061/(ASCE)1090-0268(1998)2:4(175).
Neville A. M. 2012. Properties of concrete. 5th ed. Kraków, Poland: Polish Cement Association.
Ombres L. 2007. “Confinement effectiveness in concrete strengthened with fiber reinforced cement based composite jackets.” In Proc., 8th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8). Rende, Italy: Univ. of Calabria.
Ombres, L. 2017a. “Concrete confinement with a cement based high strength composite material.” Compos. Struct. 109 (Mar): 294–304. https://doi.org/10.1016/j.compstruct.2013.10.037.
Ombres, L. 2017b. “Structural performances of thermally conditioned PBO FRCM confined concrete cylinders.” Compos. Struct. 176 (Sep): 1096–1106. https://doi.org/10.1016/j.compstruct.2017.06.026.
Rochette, P., and P. Labossiere. 2000. “Axial testing of rectangular column models confined with composites.” J. Compos. Constr. 4 (3): 129–136. https://doi.org/10.1061/(ASCE)1090-0268(2000)4:3(129).
Rousakis T. C. 2012. “Confinement of concrete columns by fiber rope reinforcements.” In Proc., 6th Inter. Conf. on FRP Composites in Civil Engineering (CICE 2012). Komotini, Greece: Democritus Univ. of Thrace.
Rousakis, T. C. 2014. “Elastic fiber ropes of ultrahigh-extension capacity in strengthening of concrete through confinement.” J. Mater. Civ. Eng. 26 (1): 34–44. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000796.
Rousakis, T. C., A. I. Karabinis, P. D. Kiousis, and R. Tepfers. 2008. “Analytical modelling of plastic behaviour of uniformly FRP confined concrete members.” Composites, Part B 39 (7–8): 1104–1113. https://doi.org/10.1016/j.compositesb.2008.05.001.
Ruredil. 2009. X Mesh Gold data sheet, Ruredil SPA. Milan, Italy: Ruredil.
Silva, M. A. G. 2011. “Behavior of square and circular columns strengthened with aramidic or carbon fibers.” Constr. Build. Mater. 25 (8): 3222–3228. https://doi.org/10.1016/j.conbuildmat.2011.03.007.
Technical Approval. 2011. Research and engineering brainpower development. Warsaw, Poland: Road and Bridge Research Institute.
Teng, J. G., and L. Lam. 2004. “Behaviour and modelling of fiber reinforced polymer confined concrete.” J. Struct. Eng. 130 (11): 1713–1723. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:11(1713).
Tetta, Z. C., L. N. Koutas, and D. A. Bournas. 2016. “Shear strengthening of full-scale RC T-beams using textile-reinforced mortar and textile-based anchors.” Composites, Part B 95 (Jun): 225–239. https://doi.org/10.1016/j.compositesb.2016.03.076.
Trapko T. 2013a. “The deformability of compressed concrete elements strengthened with FRCM composite materials.” [In Polish.] Budownictwo i Architektura 12 (1): 163–170.
Trapko, T. 2013b. “The effect of high temperature on the performance of CFRP and FRCM confined concrete elements.” Composites, Part B 54 (Nov): 138–145. https://doi.org/10.1016/j.compositesb.2013.05.016.
Trapko, T. 2013c. “Fibre reinforced cementitious matrix confined concrete elements.” Mater. Des. 44 (Feb): 382–391. https://doi.org/10.1016/j.matdes.2012.08.024.
Trapko, T. 2013d. “Stress—Strain model for FRCM confined concrete elements.” Composites, Part B 45 (1): 1351–1359. https://doi.org/10.1016/j.compositesb.2012.07.001.
Trapko, T. 2014. “Confined concrete elements with PBO-FRCM composites.” Constr. Build. Mater. 73 (Dec): 332–338. https://doi.org/10.1016/j.conbuildmat.2014.09.055.
Trapko, T., and M. Musiał. 2017. “PBO mesh mobilization via different ways of anchoring PBO-FRCM reinforcements.” Composites, Part B 118 (Jun): 67–74. https://doi.org/10.1016/j.compositesb.2017.03.009.
Trapko, T., D. Urbańska, and M. Kamiński. 2015. “Shear strengthening of reinforced concrete beams with PBO-FRCM composites.” Composites, Part B 80 (Feb): 63–72. https://doi.org/10.1016/j.compositesb.2015.05.024.
Wang, L-M., and Y-F. Wu. 2008. “Effect of corner radius on the performance of CFRP-confined square concrete columns: Test.” Eng. Struct. 30 (2): 493–505. https://doi.org/10.1016/j.engstruct.2007.04.016.
Wu, Y-F., and J-F. Jiang. 2013. “Effective strain of FRP for confined circular concrete columns.” Compos. Struct. 95 (1): 479–491. https://doi.org/10.1016/j.compstruct.2012.08.021.
Wu, Y-F., and Y-Y. Wei. 2010. “Effect of cross-sectional aspect ratio on the strength of CFRP-confined rectangular concrete columns.” Eng. Struct. 32 (1): 32–45. https://doi.org/10.1016/j.engstruct.2009.08.012.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Jan 24, 2020
Accepted: Jun 23, 2020
Published online: Oct 21, 2020
Published in print: Jan 1, 2021
Discussion open until: Mar 21, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.