Development of a Unique Test Apparatus to Conduct Axial and Transverse Pullout Testing on Geogrid Reinforcements
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 1
Abstract
In the design of reinforced soil structures, the pullout resistance of reinforcement embedded in the fill material is an important input parameter. Different pullout test setups have been proposed previously to determine the axial pullout resistances of reinforcements. In the present study, the details of a unique test apparatus with the ability to conduct both axial and transverse pullout testing of different types of reinforcement was highlighted. The pullout resistances of different geogrids embedded in uniform dense sand beds were presented. Based on extensive axial pullout testing on five different geogrids of varying tensile strengths and aperture sizes under three different normal stresses, empirical equations were proposed to estimate the axial pullout resistances of geogrids at two front-end pullout displacements. The estimated pullout resistances from the proposed equations were found to be in close agreement with the pullout resistances of a sixth geogrid considered in the present study and with the two other studies reported in the literature. A sensitivity analysis was carried out to determine the key parameters influencing the pullout resistance of the geogrid. For the different geogrids tested in dense sand, the axial pullout resistance factors were found to range from 0.34 to 1.97 and 0.52 to 2.05, corresponding to the reinforcement front-end displacements of 30 and 50 mm.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors would like to express their gratitude to Techfab India (India) and Strata Geosystems Pvt. Ltd. (India) for their support in providing the geogrids used in the study. The last author would like to acknowledge the support for his role in this research by the Australian Research Council Industrial Transformation Training Centre for Advanced Technologies in Rail Track Infrastructure (IC170100006).
References
AASHTO. 2010. LRFD bridge design specifications. 5th ed. Washington, DC: AASHTO.
Alfaro, M. C., N. Miura, and D. T. Bergado. 1995. “Soil-geogrid reinforcement interaction by pullout and direct shear tests.” Geotech. Test. J. 18 (2): 157–167. https://doi.org/10.1520/GTJ10319J.
Anubhav, and P. K. Basudhar. 2010. “Modeling of soil-woven geotextile interface behavior from direct shear test results.” Geotext. Geomembr. 28 (4): 403–408. https://doi.org/10.1016/j.geotexmem.2009.12.005.
ASTM. 2006a. Standard test methods for maximum index density and unit weight of soils using a vibratory table. West Conshohocken, PA: ASTM.
ASTM. 2006b. Standard test methods for minimum index density and unit weight of soils and calculation of relative density. West Conshohocken, PA: ASTM.
ASTM. 2013. Standard test method for measuring geosynthetic pullout resistance in soil. West Conshohocken, PA: ASTM.
Balunaini, U., V. D. Kumar Mohan, M. Prezzi, and R. Salgado. 2014. “Shear strength of tyre chip–sand and tyre shred–sand mixtures.” Geotech. Eng. 167 (6): 585–595. https://doi.org/10.1680/geng.13.00097.
Balunaini, U., and M. Prezzi. 2010. “Interaction of ribbed-metal-strip reinforcement with tire shred-sand mixtures.” Geotech. Geol. Eng. 28 (2): 147–163. https://doi.org/10.1007/s10706-009-9288-6.
Bathurst, R. J., and Y. Yu. 2018. “Probabilistic prediction of reinforcement loads for steel MSE walls using a response surface method.” Int. J. Geomech. 18 (5): 04018027. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001120.
Bergado, D. T., and J. C. Chai. 1994. “Pullout force/displacement relationship of extensible grid reinforcements.” Geotext. Geomembr. 13 (5): 295–316. https://doi.org/10.1016/0266-1144(94)90025-6.
Elias, V., B. R. Christopher, and R. R. Berg. 2001. Mechanically stabilized earth walls and reinforced soil slopes design and construction guidelines. Rep. No. Washington, DC: FHWA.
Esfandiari, J., and M. R. Selamat. 2012. “Laboratory investigation on the effect of transverse member on pull out capacity of metal strip reinforcement in sand.” Geotext. Geomembr. 35 (Dec): 41–49. https://doi.org/10.1016/j.geotexmem.2012.07.002.
Farrag, K., Y. B. Acar, and I. Juran. 1993. “Pull-out resistance of geogrid reinforcements.” Geotext. Geomembr. 12 (2): 133–159. https://doi.org/10.1016/0266-1144(93)90003-7.
Gurung, N., F. Bullen, M. R. Madhav, and Y. Iwao. 2000. Pullout models for geosynthetics, 1–6. Lisbon, Portugal: International Society for Rock Mechanics and Rock Engineering.
Hariprasad, C., M. Rajashekhar, and B. Umashankar. 2016. “Preparation of uniform sand specimens using stationary pluviation and vibratory methods.” Geotech. Geol. Eng. 34 (6): 1909–1922. https://doi.org/10.1007/s10706-016-0064-0.
Hariprasad, C., and B. Umashankar. 2018. “Transverse pullout response of smooth-metal-strip reinforcements embedded in sand.” J. Geotech. Geoenviron. Eng. 144 (3): 06017020. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001838.
Helsel, D. R., and R. M. Hirsch. 2002. Statistical methods in water resources techniques of water resources investigations. Washington, DC: USGS.
Indraratna, B., M. M. Biabani, and S. Nimbalkar. 2015. “Behavior of geocell-reinforced subballast subjected to cyclic loading in plane-strain condition.” J. Geotech. Geoenviron. Eng. 141 (1): 04014081. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001199.
Isik, A., and A. Gurbuz. 2020. “Pullout behavior of geocell reinforcement in cohesionless soils.” Geotext. Geomembr. 48 (1): 71–81. https://doi.org/10.1016/j.geotexmem.2019.103506.
Jayawickrama, P. W., W. D. Lawson, T. A. Wood, and J. G. Surles. 2015. “Pullout resistance factors for steel MSE reinforcements embedded in gravelly backfill.” J. Geotech. Geoenviron. Eng. 141 (2): 04014090. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001192.
Juran, I., G. Knockenmus, Y. B. Acar, and A. Arman. 1988. Pull-out response of geotextiles and geogrids (synthesis of available experimental data), 92–111. Reston, VA: ASCE.
Koerner, R. M. 1990. Designing with geosynthetics. 2nd ed. Englewood Cliffs, NJ: Prentice Hall.
Liu, C., J. G. Zornberg, T. Chen, Y. Ho, and B. Lin. 2009. “Behavior of geogrid-sand interface in direct shear mode.” J. Geotech. Geoenviron. Eng. 135 (12): 1863–1871. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000150.
Lopes, M. J., and M. L. Lopes. 1999. “Soil-geosynthetic interaction-influence of soil particle size and geosynthetic structure.” Geosynthetics Int. 6 (4): 261–282. https://doi.org/10.1680/gein.6.0153.
Lopes, M. L., and M. Ladeira. 1996a. “Influence of the confinement, soil density and displacement rate on soil-geogrid interaction.” Geotext. Geomembr. 14 (10): 543–554. https://doi.org/10.1016/S0266-1144(97)83184-6.
Lopes, M. L., and M. Ladeira. 1996b. “Role of specimen geometry, soil height and sleeve length on the pull-out behavior of geogrids.” Geosynthetics Int. 3 (6): 701–719. https://doi.org/10.1680/gein.3.0081.
Minažek, K., and M. Mulabdić. 2013. “A review of soil and reinforcement interaction testing in reinforced soil by pullout test.” J. Croatian Assoc. Civ. Eng. 65 (3): 235–250. https://doi.org/10.14256/JCE.653.2012.
Moraci, N., and P. Recalcati. 2006. “Factors affecting the pullout behavior of extruded geogrids embedded in a compacted granular soil.” Geotext. Geomembr. 24 (4): 220–242. https://doi.org/10.1016/j.geotexmem.2006.03.001.
Palmeira, E. M. 2009. “Soil-geosynthetic interaction: Modelling and analysis.” Geotext. Geomembr. 27 (5): 368–390. https://doi.org/10.1016/j.geotexmem.2009.03.003.
Pant, A., M. Datta, and G. V. Ramana. 2019. “Bottom ash as a backfill material in reinforced soil structures.” Geotext. Geomembr. 47 (4): 514–521. https://doi.org/10.1016/j.geotexmem.2019.01.018.
Prasad, P. S., and G. V. Ramana. 2016. “Imperial smelting furnace (zinc) slag as a structural fill in reinforced soil structures.” Geotext. Geomembr. 44 (3): 406–428. https://doi.org/10.1016/j.geotexmem.2016.01.009.
Rao, G. V., and S. K. Pandey. 1988. “Evaluation of geotextile-soil friction.” Indian Geotech. J. 18 (1): 77–105.
Sireesh, S., T. G. Sitharam, and S. K. Dash. 2009. “Bearing capacity of circular footing on geocell-sand mattress overlying clay bed with void.” Geotext. Geomembr. 27 (2): 89–98. https://doi.org/10.1016/j.geotexmem.2008.09.005.
Sukmak, G., P. Sukmak, A. Joongklang, A. Udomchai, S. Horpibulsuk, A. Arulrajah, and C. Yeanyong. 2020. “Predicting pullout resistance of bearing reinforcement embedded in cohesive-frictional soils.” J. Mater. Civ. Eng. 32 (3): 04019379. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003043.
Tuna, S. C., and S. Altun. 2012. “Mechanical behavior of sand-geotextile interface.” Sci. Iranica 19 (4): 1044–1051. https://doi.org/10.1016/j.scient.2012.06.009.
Weerasekara, L., and D. Wijewickreme. 2010. “An analytical method to predict the pullout response of geotextiles.” Geosynthetics Int. 17 (4): 193–206. https://doi.org/10.1680/gein.2010.17.4.193.
Youwai, S., D. T. Bergado, and N. Supawiwat. 2004. “Interaction between hexagonal wire reinforcement and rubber tire chips with and without sand mixture.” Geotech. Test. J. 27 (3): 260–268. https://doi.org/10.1520/GTJ11695.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Nov 9, 2019
Accepted: Jun 15, 2020
Published online: Oct 21, 2020
Published in print: Jan 1, 2021
Discussion open until: Mar 21, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.