Prediction of Paving Performance for Epoxy Asphalt Mixture by Its Time- and Temperature-Dependent Properties
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 3
Abstract
As a type of thermosetting material, any improper or faulty operation of the epoxy asphalt cannot be rectified if the irreversible reaction has taken place. This has brought difficulties to the construction organization of epoxy asphalt pavement. The objective of this study is to evaluate the paving performance of epoxy asphalt mixtures (EAMs) and to predict the allowable time for paving and traffic opening. The viscosity curves of epoxy asphalt binder (EAB) were first measured under different reserved temperatures, and a viscosity growth model considering the time-temperature characteristic was proposed. The Marshall tests were also carried out on EAM under the preset reserved temperature and time to measure the Marshall stability (MS) and the air voids. The permissible reserved time at various reserved temperatures can be obtained through either the viscosity test on EAB or the Marshall test on EAM. The applicability of the two methods was compared, and the temperature influence was discussed. Additionally, the Marshall test results indicate that the relationship between the MS growth rate and the curing temperature follows the Arrhenius law: the traffic opening time of the EAM pavement can be forecast once the temperature-dependent rule is established. The results of this study can provide practical guidance to the mixing, paving, and curing processes of the EAM pavement.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
Support from the CCCC Highway Consultants Co. Ltd. is gratefully acknowledged.
References
Asphalt Institute. 2003. Performance graded asphalt binder specification and testing superpave. Lexington, KY: Asphalt Institute.
ASTM. 1998. Test method for resistance of plastic flow of bituminous mixtures using Marshall apparatus. ASTM D1559. West Conshohocken, PA: ASTM.
ASTM. 2006a. Standard test method for kinematic viscosity of transparent and opaque liquids. ASTM D445. West Conshohocken, PA: ASTM.
ASTM. 2006b. Standard test method for Marshall stability and flow of bituminous mixtures. ASTM D6927. West Conshohocken, PA: ASTM.
ASTM. 2011. Standard test method for epoxy content of epoxy resins. ASTM D1652. West Conshohocken, PA: ASTM.
ASTM. 2015. Standard test method for tensile properties of plastics. ASTM D638-14. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard test method for color of transparent liquids (gardner color scale). ASTM D1544-04. West Conshohocken, PA: ASTM.
Auvergne, R., S. Caillol, G. David, B. Boutevin, and J. P. Pascault. 2013. “Biobased thermosetting epoxy: Present and future.” Chem. Rev. 114 (2): 1082–1115. https://doi.org/10.1021/cr3001274.
Chen, X., G. Shen, X. Zhang, and W. Li. 2010. “Rheological characteristics of epoxy asphalt binders and their allowable reserved time.” [In Chinese.] J. Highway Transp. Res. Dev. 27 (6): 29–33.
Cubuk, M., M. Gürü, and M. K. Çubuk. 2009. “Improvement of bitumen performance with epoxy resin.” Fuel 88 (7): 1324–1328.
Fan, Y., W. Huang, J. Wang, and X. Chen. 2007. “Performance evaluation on waterproofing materials applied to orthotropic steel bridge deck pavement.” In Int. Conf. on Transportation Engineering 2007, 3299–3304. Reston, VA: ASCE.
Ferry, J. D. 1980. Viscoelastic properties of polymers. 3rd ed. New York: Wiley.
Huang, M., X. Wen, and L. Wang. 2017. “Influence of foaming effect, operation time and health preserving properties of foam epoxy asphalt mixtures.” Constr. Build. Mater. 151 (Oct): 931–938. https://doi.org/10.1016/j.conbuildmat.2017.06.083.
Huang, W. 2015. “Integrated design procedure for epoxy asphalt concrete–based wearing surface on long-span orthotropic steel deck bridges.” J. Mater. Civ. Eng. 28 (5): 1–12. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001470.
Huang, W., W. Guo, and Y. Wei. 2019. “Thermal effect on rheological properties of epoxy asphalt mixture and stress prediction for bridge deck paving.” J. Mater. Civ. Eng. 31 (10): 04019222. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002861.
Huang, W., Z. Qian, G. Chen, et al. 2002. “Research on epoxy asphalt pavement of long-span steel bridge.” [In Chinese.] Chin. Sci. Bull. 47 (24): 1894–1897.
Liu, Y., J. Zhang, R. Chen, et al. 2017. “Ethylene vinyl acetate copolymer modified epoxy asphalt binders: Phase separation evolution and mechanical properties.” Constr. Build. Mater. 137 (Apr): 55–65. https://doi.org/10.1016/j.conbuildmat.2017.01.081.
Lu, Q., and J. Bors. 2015. “Alternate uses of epoxy asphalt on bridge decks and roadways.” Constr. Build. Mater. 78 (3): 18–25. https://doi.org/10.1016/j.conbuildmat.2014.12.125.
Luo, S., and Z. D. Qian. 2014. “Preparation and performance evaluation of novel high durability epoxy asphalt concrete for bridge deck pavements.” Asian J. Chem. 26 (17): 5595. https://doi.org/10.14233/ajchem.2014.18163.
Luo, S., Z. D. Qian, J. L. Shen, et al. 2011. “Research on rheological model and construction time range of epoxy asphalt.” [In Chinese.] J. Build. Mater. 14 (5): 630–633.
Migletz, J., J. L. Graham, D. W. Harwood, and K. M. Bauer. 2001. “Service life of durable pavement markings.” Transp. Res. Rec. 1749 (1): 13–21. https://doi.org/10.3141/1749-03.
Qian, Z. D., and W. Huang. 2002. “Mechanical analysis of pavement of orthotropic steel deck.” [In Chinese.] J. Traffic Transp. Eng. 22 (3): 53–57.
Qian, Z. D., S. Luo, and J. W. Wang. 2007. “Laboratory evaluation of epoxy resin modified asphalt mixtures.” J. Southeast Univ. 23 (1): 117–121.
Research Institute of Highway Ministry of Transport. 2011. Standard test methods of bitumen and bituminous mixtures for highway engineering. JTG E20-2011. Beijing: Research Institute of Highway Ministry of Transport.
Roller, M. B. 1986. “Rheology of curing thermosets: A review.” Polym. Eng. Sci. 26 (6): 432–440. https://doi.org/10.1002/pen.760260610.
Sun, Y., Y. Zhang, K. Xu, W. Xu, D. Yu, L. Zhu, H. Xie, and R. Cheng. 2015. “Thermal, mechanical properties, and low-temperature performance of fibrous nanoclay-reinforced epoxy asphalt composites and their concretes.” J. Appl. Polym. Sci. 132 (12): 416941–416949. https://doi.org/10.1002/app.41694.
Theriault, R. P., T. A. Osswald, and J. M. Castro. 1999. “A numerical model of the viscosity of an epoxy prepreg resin system.” Polym. Compos. 20 (5): 628–633. https://doi.org/10.1002/pc.10385.
Wei, J., and Y. Zhang. 2012. “Study on the curing process of epoxy asphalt.” J. Test. Eval. 40 (7): 1169–1176. https://doi.org/10.1520/JTE20120136.
Yu, J., P. Cong, and S. Wu. 2009a. “Laboratory investigation of the properties of asphalt modified with epoxy resin.” J. Appl. Polym. Sci. 113 (6): 3557–3563. https://doi.org/10.1002/app.30324.
Yu, J., P. Cong, S. Wu, and S. Cheng. 2009b. “Curing behavior of epoxy asphalt.” J. Wuhan Univ. Technol.-Mater. Sci. Ed. 24 (3): 462–465. https://doi.org/10.1007/s11595-009-3462-9.
Yu, X., F. Dong, G. Ding, S. Liu, and S. Shen. 2016. “Rheological and microstructural properties of foamed epoxy asphalt.” Constr. Build. Mater. 114 (4): 215–222. https://doi.org/10.1016/j.conbuildmat.2016.03.179.
Zhu, Y. M., Z. D. Qian, X. Wang, et al. 2005. “Research on the influence factors in air void control of epoxy asphalt concrete.” [In Chinese.] J. Transp. Eng. Inf. 3 (2): 97–100.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: May 14, 2019
Accepted: Aug 5, 2019
Published online: Jan 13, 2020
Published in print: Mar 1, 2020
Discussion open until: Jun 13, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.