Evaluation of Abrasion Resistance of Self-Consolidating Rubberized Concrete by Acoustic Emission Analysis
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 8
Abstract
The purpose of this study was to investigate and compare the abrasion resistance of self-consolidating concrete (SCC) with crumb rubber (CR) in conjunction with acoustic emission (AE) monitoring. The variables were the type of concrete (normal concrete and SCC), the coarse aggregate content, the use of supplementary cementing materials (SCM), and the CR content. The AE characteristics such as the signal amplitude, signal strength, and number of hits were obtained from the AE software used during the abrasion testing. The signal amplitude and strength data obtained were further analyzed to calculate the b-value, severity (), and historic index []. The results showed that the addition of CR negatively affected the abrasion resistance of the tested samples, whereas the addition of SCM greatly enhanced the abrasion. A good correlation was found between the abrasion damage and the AE parameters, including the number of hits, signal strength, b-value, , and . The results also presented developed damage classification charts using the AE intensity parameters [ and ] to determine the ranges that indicate the extent of damage due to the abrasion of the tested mixtures.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abdelrahman, M., M. K. ElBatanouny, P. Ziehl, J. Fasl, C. J. Larosche, and J. Fraczek. 2015. “Classification of alkali-silica reaction damage using acoustic emission: A proof-of-concept study.” Constr. Build. Mater. 95 (Oct): 406–413. https://doi.org/10.1016/j.conbuildmat.2015.07.093.
Abdelrahman, M., M. K. ElBatanouny, and P. H. Ziehl. 2014. “Acoustic emission based damage assessment method for prestressed concrete structures: Modified index of damage.” Eng. Struct. 60 (Feb): 258–264. https://doi.org/10.1016/j.engstruct.2013.12.037.
Abouhussien, A. A., and A. A. A. Hassan. 2017. “Acoustic emission monitoring for bond integrity evaluation of reinforced concrete under pull-out tests.” Adv. Struct. Eng. 20 (9): 1390–1405. https://doi.org/10.1177/1369433216678864.
ASTM. 2009. Standard test method for slump flow of self-consolidating concrete. ASTM C1611-09. West Conshohocken, PA: ASTM.
ASTM. 2012a. Standard specification for Portland cement. ASTM C150-12. West Conshohocken, PA: ASTM.
ASTM. 2012b. Standard test method for abrasion resistance of concrete (underwater method). ASTM C1138-M-12. West Conshohocken, PA: ASTM.
ASTM. 2012c. Standard test method for abrasion resistance of concrete by sandblasting. ASTM C418-12. West Conshohocken, PA: ASTM.
ASTM. 2012d. Standard test method for abrasion resistance of concrete or mortar surfaces by the rotating-cutter method. ASTM C944/C944M-12. West Conshohocken, PA: ASTM.
ASTM. 2012e. Standard test method for abrasion resistance of horizontal concrete surfaces. ASTM C779/C779M-12. West Conshohocken, PA: ASTM.
ASTM. 2012f. Standard test method for compressive strength of cylindrical concrete specimens. ASTM C39-12. West Conshohocken, PA: ASTM.
ASTM. 2013. Standard specification for chemical admixtures for concrete. ASTM C494-13. West Conshohocken, PA: ASTM.
ASTM. 2014. Standard terminology for nondestructive examinations. ASTM E1316-14. West Conshohocken, PA: ASTM.
Colombo, I. S., I. G. Main, and M. C. Forde. 2003. “Assessing damage of reinforced concrete beam using ‘b-value’ analysis of acoustic emission signals.” J. Mater. Civ. Eng. 15 (3): 280–286. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:3(280).
ElBatanouny, M. K., J. Mangual, P. H. Ziehl, and F. Matta. 2014. “Early corrosion detection in prestressed concrete girders using acoustic emission.” J. Mater. Civ. Eng. 26 (3): 504–511. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000845.
El-Chabib, H., and A. Syed. 2013. “Properties of self-consolidating concrete made with high volumes of supplementary cementitious materials.” J. Mater. Civ. Eng. 25 (11): 1579–1586. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000733.
Eldin, N. N., and A. B. Senouci. 1994. “Measurement and prediction of the strength of rubberized concrete.” Cem. Concr. Compos. 16 (4): 287–298. https://doi.org/10.1016/0958-9465(94)90041-8.
Farhidzadeh, A., E. Dehghan-Niri, S. Salamone, B. Luna, and A. Whittaker. 2013. “Monitoring crack propagation in reinforced concrete shear walls by acoustic emission.” J. Struct. Eng. 139 (12): 04013010. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000781.
Ghafoori, N., M. Najimi, and M. A. Aqel. 2014. “Abrasion resistance of self-consolidating concrete.” J. Mater. Civ. Eng. 26 (2): 296–303. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000847.
Ismail, M. K., and A. A. A. Hassan. 2016a. “Impact resistance and acoustic absorption capacity of self-consolidating rubberized concrete.” ACI Mater. J. 113 (6): 725–736.
Ismail, M. K., and A. A. A. Hassan. 2016b. “Use of metakaolin on enhancing the mechanical properties of SCC containing high percentages of crumb rubber.” J. Clean. Prod. 125 (Jul): 282–295. https://doi.org/10.1016/j.jclepro.2016.03.044.
Ismail, M. K., and A. A. A. Hassan. 2017. “Impact resistance and mechanical properties of self-consolidating rubberized concrete reinforced with steel fibers.” J. Mater. Civ. Eng. 29 (1): 04016193. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001731.
Li, D., Z. Chen, Q. Feng, and Y. Wang. 2015. “Damage analysis of CFRP-confined circular concrete-filled steel tubular columns by acoustic emission techniques.” Smart Mater. Struct. 24 (8): 085017 https://doi.org/10.1088/0964-1726/24/8/085017.
Mistras Group. 2007. PCI-2 based AE system 1 user’s manual. West Windsor, NJ: Physical Acoustics.
Nair, A., and C. S. Cai. 2010. “Acoustic emission monitoring of bridges: Review and case studies.” Eng. Struct. 32 (6): 1704–1714. https://doi.org/10.1016/j.engstruct.2010.02.020.
Najim, K. B., and M. Hall. 2012. “Mechanical and dynamic properties of self-compacting crumb rubber modified concrete.” Constr. Build. Mater. 27 (1): 521–530. https://doi.org/10.1016/j.conbuildmat.2011.07.013.
Ohtsu, M., and Y. Tomoda. 2008. “Phenomenological model of corrosion process in reinforced concrete identified by acoustic emission.” ACI Mater. J. 105 (2): 194–199.
Ozbay, E., M. Lachemi, and U. K. Sevim. 2011. “Compressive strength, abrasion resistance and energy absorption capacity of rubberized concrete with and without slag.” Mater. Struct. 44 (7): 1297–1307. https://doi.org/10.1617/s11527-010-9701.
Papenfus, N. 2003. “Applying concrete technology to abrasion resistance.” In Proc., 7th Int. Conf. on Concrete Block Paving (PAVE AFRICA 2003). Irene, Gauteng, South Africa: Document Transformation Technologies.
Physical Acoustics. 2005. R6I-AST sensor. West Windsor, NJ: Physical Acoustics.
Pollock, A. A. 1986. “Classical wave theory in practical AE testing.” In Proc., Int. Acoustic Emission Symp., 708–721. Japan: Japanese Society for Nondestructive Testing.
Rahman, M. M., M. Usman, and A. A. Al-Ghalib. 2012. “Fundamental properties of rubber modified self-compacting concrete (RMSCC).” Constr. Build. Mater. 36 (Nov): 630–637. https://doi.org/10.1016/j.conbuildmat.2012.04.116.
Sadek, D. M., and M. M. El-Attar. 2015. “Structural behavior of rubberized masonry walls.” J. Clean. Prod. 89 (Feb): 174–186. https://doi.org/10.1016/j.jclepro.2014.10.098.
Sagar, R. V., and B. K. R. Prasad. 2013. “Laboratory investigations on cracking in reinforced concrete beams using on-line acoustic emission monitoring technique.” J. Civ. Struct. Health Monit. 3 (3): 169–186. https://doi.org/10.1007/s13349-013-0036-5.
Scott, B. D., and M. Safiuddin. 2015. “Abrasion resistance of concrete–Design, construction and case study.” Concr. Res. Lett. 6 (3): 136–148.
Su, H., J. Yang, T. Ling, G. S. Ghataora, and S. Dirar. 2015. “Properties of concrete prepared with waste tyre rubber particles of uniform and varying sizes.” J. Clean. Prod. 91 (Mar): 288–296. https://doi.org/10.1016/j.jclepro.2014.12.022.
Thomas, B. S., R. C. Gupta, P. Kalla, and L. Cseteneyi. 2014. “Strength, abrasion and permeation characteristics of cement concrete containing discarded rubber fine aggregates.” Constr. Build. Mater. 59 (May): 204–212. https://doi.org/10.1016/j.conbuildmat.2014.01.074.
Thomas, B. S., S. Kumar, P. Mehra, R. C. Gupta, M. Joseph, and L. J. Csetenyi. 2016. “Abrasion resistance of sustainable green concrete containing waste tire rubber particles.” Constr. Build. Mater. 124 (Oct): 906–909. https://doi.org/10.1016/j.conbuildmat.2016.07.110.
Turer, A. 2012. “Recycling of scrap tires, material recycling—Trends and perspectives. Accessed September 19, 2017. http://www.intechopen.com/books/materialrecycling-trends-and-perspectives/use-of-scrap-tires-in-industry.
Vélez, W., F. Matta, and P. Ziehl. 2015. “Acoustic emission monitoring of early corrosion in prestressed concrete piles.” Struct. Contr. Health Monit. 22 (5): 873–887. https://doi.org/10.1002/stc.1723.
Wang, C., Y. Zhang, and A. Ma. 2011. “Investigation into the fatigue damage process of rubberized concrete and plain concrete by AE analysis.” J. Mater. Civ. Eng. 23 (7): 953–960. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000257.
Ziehl, P. H., N. Galati, A. Nanni, and J. G. Tumialan. 2008. “In-situ evaluation of two concrete slab systems. II: Evaluation criteria and outcomes.” J. Perform. Constr. Facil. 22 (4): 217–227. https://doi.org/10.1061/(ASCE)0887-3828(2008)22:4(217).
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Sep 29, 2017
Accepted: Feb 26, 2018
Published online: Jun 11, 2018
Published in print: Aug 1, 2018
Discussion open until: Nov 11, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.