Temperature Induced Creep in Low-Alloy Structural Q345 Steel
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 6
Abstract
Significant levels of creep deformations in structural steel members exposed to high temperatures has been widely observed in experiments; however, inclusion of creep effects in numerical simulations has been limited due to lack of reliable experimental data and corresponding constitutive creep models for structural steel. This paper presents an experimental investigation into temperature-induced creep in low-alloy Q345 steel, which is commonly used in structural members. A set of creep tests is carried out at various stress levels in 300–900°C temperature range. Data from these creep tests indicate that temperature has significant influence on the level of creep deformations in Q345 steel, especially when the temperature in steel exceeds 400°C. The creep strain at a given temperature increases with stress level and the creep strain at a given stress level increases with temperature.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors wish to acknowledge the support from the Fundamental Research Funds for the Central Universities (Grant No. CDJZR12200004 and 106112013CDJZR200006), the Natural Science Foundation of Chongqing (Grant No. cstc2013jcyjA30010), Funding Plan for Young Teachers at University of Chongqing, and Michigan State University. Any opinions, findings, and conclusions or recommendations expressed in this paper are those of the authors and do not necessarily reflect the views of the sponsors.
References
ANSYS version 12.0 [Computer software]. Ansys, Canonsburg, PA.
ASTM. (2007). “Standard specification for high-strength low-alloy columbium-vanadium structural steel.” A572/A572M-07, West Conshohocken, PA.
China Association for Engineering Construction Standardization (CECS). (2006). “Chinese technical code for fire safety of steel structure in buildings.” CECS200:2006, China Planning Press, Beijing.
Fields, B. A., and Fields, R. J. (1989). “Elevated temperature deformation of structural steel.”, NIST, Gaithersburg, MD.
Harmathy, T. Z. (1967). “A comprehensive creep model.” J. Basic Eng., 89(3), 496–502.
Kodur, V. K. R., and Aziz, E. M. (2015). “Effect of temperature on creep in ASTM A572 high-strength low-alloy steels.” Mater. Struct., 48(6), 1669–1677.
Kodur, V. K. R., and Dwaikat, M. (2009). “Response of steel beam-columns exposed to fire.” Eng. Struct., 31(2), 369–379.
Kodur, V. K. R., and Dwaikat, M. (2010). “Effect of high temperature creep on the fire response of restrained steel beams.” Mater. Struct., 43(10), 1327–1341.
Morovat, M. A., Engelhardt, M. D., Helwig, T. A., and Taleff, E. M. (2014). “High-temperature creep buckling phenomenon of steel columns subjected to fire.” J. Fire Struct. Eng., 5(3), 189–202.
SAC (Standardization Administration of the People’s Republic of China). (1988). “Alloy structural steel—Technical requirements.” GB/T 3077-1988, China Standard Press, Beijing.
SAC (Standardization Administration of the People’s Republic of China). (2010). “Metallic materials—Tensile testing—Part 1: Method of test at room temperature.” GB/T 228.1-2010, China Standard Press, Beijing.
Toric, N., Harapin, A., and Boko, I. (2013). “Experimental verification of a newly developed implicit creep model for steel structures exposed to fire.” Eng. Struct., 57, 116–124.
Yu, W., Zhao, J., and Shi, J. (2010). “Dynamic mechanical behavior of Q345 steel at elevated temperatures: Experimental study.” Mater. High Temp., 27(4), 285–293.
Zhang, W., Hao, P., Liu, Y., and Shu, X. (2011). “Determination of the dynamic response of Q345 steel materials by using SHPB.” Procedia Eng., 24, 773–777.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Apr 29, 2015
Accepted: Oct 30, 2015
Published online: Jan 8, 2016
Published in print: Jun 1, 2016
Discussion open until: Jun 8, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.