Detailed Experimental Review of Flexural Behavior of Cement Stabilized Soil Block Masonry
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 6
Abstract
Cement stabilized soil block (CSSB) is a modern earthen building material that is used in the construction of masonry structures. Most studies involving CSSB have focused on how its composition affects strength characteristics and material properties such as erosion. In contrast, very little is currently known about CSSB structural behavior. This study set forth to address the absence of data in this research area, focusing on flexural panel testing, including separate horizontal and vertical bending tests. It was found that CSSB follows traditional masonry reactions; also, through experimental observation, two separate failure modes were identified. A linear elastic analysis confirmed these failure modes and predicted the cracking moment in the specimens analyzed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The first and second authors acknowledge the support of the U.S. National Science Foundation, Grant CMMI-1030398.
References
Adam, E., and Agib, A. (2001). “Compressed stabilised earth block manufacture in Sudan.” Graphoprint for UNESCO, Paris.
ASTM. (2014a). “Standard test method for compressive strength of masonry prisms.” ASTM C1314, West Conshohocken, PA.
ASTM. (2014b). “Standard test methods for sampling and testing brick and structural clay tile.” ASTM C67, West Conshohocken, PA.
Derakhshan, H., Griffith, M. C., and Ingham, J. M. (2011). “Out-of-plane behavior of one-way spanning unreinforced masonry walls.” J. Eng. Mech., 409–417.
Hossain, K., and Mol, L. (2011). “Some engineering properties of stabilized clayey soils incorporating natural pozzolans and industrial wastes.” Constr. Build. Mater., 25(8), 3495–3501.
Houben, H., and Guillaud, H. (1994). Earth construction: A comprehensive guide, Intermediate Technology Publications, London.
NMRLD (New Mexico Regulation and Licensing Dept). (2009). “2009 New Mexico residential building code.”, Santa Fe.
Reddy, B. V. V., and Gupta, A. (2006). “Tensile bond strength of soil-cement block masonry couplets using cement-soil mortars.” J. Mater. Civ. Eng., 36–45.
Reddy, B. V. V., Lal, R., and Rao, K. S. N. (2007). “Enhancing bond strength and characteristics of soil-cement block masonry.” J. Mater. Civ. Eng., 164–172.
Reddy, B. V. V., and Latha, M. S. (2013). “Influence of soil grading on the characteristics of cement stabilised soil compacts.” Mater. Struct., 47(10), 1633–1645.
Reddy, B. V. V., and Walker, P. (2005). “Stabilised mud blocks: Problems, prospects.” Proc., Int. Earth Building Conf., Faculty of Design, Architecture and Building, Univ. of Technology, Sydney, Australia, 63–75.
Standards New Zealand. (1998). “Materials and workmanship for earth buildings.” NZS 4298:1998, Committee BD/6/2, Wellington, New Zealand.
UN (United Nations). (2011). “Compendium of human settlements statistics.” Dept. of Economic and Social Affairs Statistics Division, New York.
Walker, P. (2004). “Strength and erosion characteristics of earth blocks and earth block masonry.” J. Mater. Civ. Eng., 497–506.
Walker, P., and Stace, T. (1997). “Properties of some cement stabilised compressed earth blocks and mortars.” Mater. Struct., 30(9), 545–551.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Jan 2, 2015
Accepted: Nov 23, 2015
Published online: Jan 12, 2016
Published in print: Jun 1, 2016
Discussion open until: Jun 12, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.