Integrated Framework for Estimating, Benchmarking, and Monitoring Pollutant Emissions of Construction Operations
Publication: Journal of Construction Engineering and Management
Volume 139, Issue 12
Abstract
Construction operations are highly energy-intensive and account for significant environmental impacts, including greenhouse gases (GHG) and other engine exhaust associated with material procurement/delivery and on-site construction activities. The opportunities for mitigating air pollutant emissions from construction operations can be captured by estimating and benchmarking during the preconstruction phase and then monitoring during the construction phase. However, a formal process model to manage the environmental aspects of on-site construction activities has yet to be clearly delineated, although recently several research efforts have appeared in relevant areas such as the development of in-use emission factors of construction equipment, methods for reliably estimating emissions at the project level, embodied carbon footprint benchmarking methods, and practical monitoring tools. Such a lack of a formal process model causes the misinterpretation of the benefits from recent research efforts in each area and hinders their implementation in practice. In this context, this paper aims to establish a framework model that could be a systematic and generic reference to the management of pollutant emissions from construction operations with state-of-the-art methods and tools. To do so, the paper identifies a generic process to be supported by research efforts in each area and presents an integrated framework based on the analysis of data connectivity between processes. An example of the indirect emission measurement is presented to demonstrate how data connectivity can be ensured between processes within the framework.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahn, C., Lee, S. H., and Peña-Mora, F. (2011). “Carbon emissions quantification and verification strategies for large-scale construction projects.” Proc., Int. Conf. on Sustainable Design and Construction (ICSDC), American Society of Civil Engineers, Reston, VA.
Ahn, C., Xie, H., Lee, S. H., Abourizk, S., and Peña-Mora, F. A. (2010). “Carbon footprints analysis for tunnel construction processes in the preplanning phase using collaborative simulation.” Proc., Construction Research Congress, American Society of Civil Engineers, Reston, VA.
Ahn, C. R., and Lee, S. H. (2013). “Importance of operational efficiency to achieve energy efficiency and exhaust emission reduction of construction operations.” J. Constr. Eng. Manage., 139(4), 404–413.
Ahn, C. R., Lee, S. H., and Peña-Mora, F. (2012). “Monitoring system for operational efficiency and environmental performance of construction operations, using vibration signal analysis.” Proc., Construction Research Congress, American Society of Civil Engineers, Reston, VA.
Ahn, C. R., Lee, S. H., and Peña-Mora, F. (2013). “Accelerometer-based measurement of construction equipment operating efficiency for monitoring environmental performance.” Proc., Int. Workshop on Computing in Civil Engineering, American Society of Civil Engineers, Reston, VA.
Aliverdi, R., Shiftehfar, R., Lee, S., and Peña-Mora, F. (2012). “An integrated framework for quantitative and qualitative monitoring of construction equipment emission.” Proc., CSCE Annual Conf., Canadian Society of Civil Engineers, Edmonton, AB, Canada.
Bilec, M., Ries, R., and Matthews, H. S. (2010). “Life-cycle assessment modeling of construction processes for buildings.” J. Infrastr. Syst., 16(3), 199–205.
Bilec, M., Ries, R., Matthews, H. S., and Sharrard, A. L. (2006). “Example of a hybrid life-cycle assessment of construction processes.” J. Infrastr. Syst., 12(4), 207–215.
California Air Resources Board. (2011). Regulation for in-use off-road diesel-fueled fleets, California Code of Regulations, Sections 2449, Title 13, Article 4.8, Chapter 9, Sacramento, CA.
California Department of Transportation (CALTRANS). (1983). Energy and transportation systems, CALTRANS, Sacramento, CA.
Cass, D., and Mukherjee, A. (2011). “Calculation of greenhouse gas emissions for highway construction operations using a hybrid life cycle assessment approach: A case study for pavement operations.” J. Constr. Eng. Manage., 137(11), 1015–1025.
Frey, H. C. (2007). “Quantification of uncertainty in emission factors and inventories.” Proc., 16th Annual Int. Emission Inventory Conf., Environmental Protection Agency, Research Triangle Park, NC.
Frey, H. C., Rasdorf, W., Kim, K., Pang, S.-H., and Lewis, P. (2008). “Comparison of real world emissions of backhoes, front-end loaders, and motor graders for B20 biodiesel vs. petroleum diesel and for selected engine tiers.” Transportation Research Record 2058, Transportation Research Board, Washington, DC, 33–42.
GlobalMRV. (2013). “Axion R/S.” 〈globalmrv.com/products/axionrs〉 (May 2, 2013).
Golparvar-Fard, M., and Niebles, J. C. (2013). “Automated activity analysis of earthmoving operations in long video sequences via hidden Markov models.” Proc., Int. Workshop on Computing in Civil Engineering, American Society of Civil Engineers, Reston, VA.
Guggemos, A. A., and Horvath, A. (2006). “Decision-support tool for assessing the environmental effects of constructing commercial buildings.” J. Archit. Eng., 12(4), 187–195.
Hammond, G. P., and Jones, C. I. (2008). “Embodied energy and carbon in construction materials.” Proc. Inst. Civ. Eng. Energ., 161(2), 87–98.
Heydarian, A., Golparvar-Fard, M., and Niebles, J. C. (2012a). “Automated visual recognition of construction equipment actions using spatio-temporal features and multiple binary support vector machines.” Proc., Construction Research Congress, American Society of Civil Engineers, Reston, VA.
Heydarian, A., Memarzadeh, M., and Golparvar-Fard, M. (2012b). “Automated benchmarking and monitoring of earthmoving operations carbon footprint using video cameras and GHG estimation model.” Proc., Int. Workshop on Computing in Civil Engineering, American Society of Civil Engineers, Reston, VA.
Lewis, P. (2009). “Estimating Fuel Use and Emission Rates of Nonroad Diesel Construction Equipment Performing Representative Duty Cycles.” Ph.D. dissertation, North Carolina State University, Raleigh, NC.
Lewis, P., Frey, H. C., and Rasdorf, W. (2009). “Development and use of emissions inventories for construction vehicles.” Transportation Research Record 2123, Transportation Research Board, Washington, DC, 46–53.
Lewis, P., and Hajji, A. (2012). “Estimating the economic energy, and environmental impact of earthwork activities.” Proc., Construction Research Congress 2012, American Society of Civil Engineers, Reston, VA.
Lewis, P., Leming, M., and Rasdorf, W. (2012). “Impact of engine idling on fuel use and CO2 emissions of nonroad diesel construction equipment.” J. Manage. Eng., 28(1), 31–38.
Melanta, S., Miller-Hooks, E., and Avetisyan, H. (2013). “Carbon footprint estimation tool for transportation construction projects.” J. Constr. Eng. Manage., 139(5), 547–555.
Memarzadeh, M., and Golparvar-Fard, M. (2012). “Monitoring and visualizing of building construction embodied carbon footprint using —N-dimensional Augmented Reality Models.” Proc., Construction Research Congress 2012, American Society of Civil Engineers, Reston, VA.
Memarzadeh, M., Golparvar-Fard, M., and Niebles, J. C. (2013). “Automated 2D detection of construction equipment and workers from site video streams using histograms of oriented gradients and colors.” Autom. Constr., 32, 24–37.
Rasdorf, W., Frey, C., Lewis, P., Kim, K., Pang, S. H., and Abolhassani, S. (2010). “Field procedures for real-world measurements of emissions from diesel construction vehicles.” J. Infrastr. Syst., 16(3), 216–225.
Ries, R., Velayutham, S., and Chang, Yuan (2010). “Life cycle assessment modeling of heavy construction activities.” Proc., 2010 Construction Research Congress, American Society of Civil Engineers, Reston, VA.
Rimpo, and Associates. (2007). URBEMIS 2007 for Windows (version 9.2.4), 〈http://www.urbemis.com〉 (Nov. 3, 2008).
Sacramento Metropolitan Air Quality Management District. (2009). “Roadway Construction Emissions Model (version 7.1.3).” 〈http://www.airquality.org/ceqa/index.shtml〉 (Jan. 3, 2011).
Sharrard, A. L., Matthews, H. S., and Ries, R. J. (2008). “Estimating construction project environmental effects using an input-output-based hybrid life-cycle assessment model.” J. Infrastruct. Syst., 14(4), 327–336.
Stammer, R. E., Jr., and Stodolsky, F. (1995). Assessment of the energy impacts of improving highway-infrastructure materials, ANL/ESD/TM–115, U.S. Dept. of Energy, Washington, DC.
Treloar, G. J., Love, P. E. D., and Crawford, R. H. (2004). “Hybrid life-cycle inventory for road construction and use.” J. Constr. Eng. Manage., 130(1), 43–49.
U.S. Environmental Protection Agency (USEPA). (2004). Final regulatory analysis: Control of emissions from nonroad diesel engines, Assessment and Standards Division, Office of Transportation and Air Quality, Washington, DC.
U.S. Environmental Protection Agency (USEPA). (2006). Recommendations for reducing emissions from the legacy diesel fleet. EPA Clean Air Act Advisory Committee, Washington DC, 〈http://www.epa.gov/diesel/documents/caaac-apr06.pdf〉 (Jul. 24, 2010).
U.S. Environmental Protection Agency (USEPA). (2008). Quantifying greenhouse gas emissions in key industrial sectors, EPA 100-R-08-002, Sector Strategies Division, Washington, DC, 〈http://www.epa.gov/sectors/pdf/2008/2008-sector-report-508-full.pdf〉 (Apr. 10, 2010).
U.S. Environmental Protection Agency (USEPA). (2009). EPA NONROAD model updates 2008, Office of Transportation and Air Quality, Ann Arbor, MI.
U.S. Green Building Council (USGBC). (2013). “The LEED Credit Library: SSpc75 Clean Construction.” 〈http://www.usgbc.org/credits/sspc75〉 (Apr. 16, 2013).
University of California at Riverside. (2007). “Evaluating the emissions from heavy-duty diesel construction equipment.” Proc., 17th CRC On-Road Vehicle Emissions Workshop; Coordinating Research Council, Coordinating Research Council, Alpharetta, GA.
Vojtisek-Lom, M. (2003). Real-World exhaust emissions from construction equipment at the world trade center No. 7 site, Prepared for Coordinated Air Use Management for Northeast States by Clean Air Technologies International, Buffalo, NY.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 139 • Issue 12 • December 2013
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Dec 15, 2012
Accepted: Jun 11, 2013
Published online: Jun 13, 2013
Published in print: Dec 1, 2013
Discussion open until: Jan 2, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.