Shear Strength of Short Rectangular Bridge Columns
Publication: Journal of Bridge Engineering
Volume 27, Issue 2
Abstract
Four short shear-critical rectangular columns were constructed and tested under monotonic shear loading and a constant compressive axial load. The main variable in these tests was the amount of shear reinforcement. The objectives were to examine the behavior of columns with small shear span-to-depth ratios and develop a method for predicting the shear strength of such columns. An inclined compressive strut was found to form between the column ends and contribute to the column shear capacity. The observed column responses were compared with predictions made using sectional analyses, combined strut and compression field models, and nonlinear finite-element analyses. Failure shears predicted by the sectional analyses were conservative. The proposed model, which considers the contribution of strut action gave reasonable estimates of the shear strength with Vexp/Vpred varying from 0.93 to 1.00. Nonlinear finite-element analysis gave accurate predictions of shear strength, as well as predictions of the complete behavior of the columns. It was determined that the strut effect is significant for reinforced axially loaded columns with shear span-to-depth ratios of less than about 2.5 but should not be considered if the columns undergo large deflections.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the financial support of the Natural Sciences and Engineering Research Council of Canada.
References
AASHTO. 2014. AASHTO LRFD bridge design specifications. 7th ed. Washington, DC: AASHTO.
ACI (American Concrete Institute). 2019. Building code requirements for structural concrete. ACI 318-19. Farmington Hills, MI: ACI.
ASTM. 2016. Standard specification for deformed and plain carbon steel bars for concrete reinforcement. ASTM 615/615M. West Conshohocken, PA: ASTM.
Bentz, E. C. 2000. “Sectional analysis of reinforced concrete members.” Ph.D. thesis, Dept. of Civil Eng, Univ. of Toronto.
Bentz, E. C. 2001. User manual—Response-2000, Shell-2000, Triax-2000, Membrane-2000. Toronto, ON: Univ. of Toronto.
Bentz, E. C., and M. P. Collins. 2006. “Development of the 2004 Canadian Standards Association (CSA) A23.3 shear provisions for reinforced concrete.” Can. J. Civ. Eng. 33 (5): 521–534. https://doi.org/10.1139/l06-005.
Bentz, E. C., F. J. Vecchio, and M. P. Collins. 2006. “Simplified modified compression field theory for calculating shear strength of reinforced concrete elements.” ACI Struct. J. 103 (4): 614–624. https://doi.org/10.14359/16438.
Collins, M. P., D. Mitchell, P. Adebar, and F. J. Vecchio. 1996. “A general shear design method.” ACI Struct. J. 93 (1): 36–45. https://doi.org/10.14359/9838.
Collins, M. P., and D. Mitchell. 1991. Prestressed concrete structures. Englewood Cliffs, NJ: Prentice Hall.
CSA (Canadian Standards Association). 2009. Carbon steel bars for concrete reinforcement. CSA G30.18. Rexdale, ON: CSA.
CSA (Canadian Standards Association). 2014. Test methods and standard practices for concrete. CSA A23.2-14. Rexdale, ON: CSA.
CHBDC (Canadian Highway Bridge Design Code). 2019. Canadian highway bridge design code. CSA S6-19. Rexdale, ON: CSA.
FIP (International Federation for Prestressing). 1996. FIP recommendations 1996—Practical design of structural concrete. London: FIP.
Ghee, A. B., M. J. N. Priestley, and T. Paulay. 1989. “Seismic shear strength of circular reinforced concrete columns.” ACI Struct. J. 86 (1): 45–59. https://doi.org/10.14359/2634.
Lynn, A. C., J. P. Moehle, S. A. Mahin, and W. T. Holmes. 1996. “Seismic evaluation of existing reinforced concrete building columns.” Earthquake Spectra 12 (4): 715–739. https://doi.org/10.1193/1.1585907.
Mattock, A. H. 1969. “Diagonal tension cracking in concrete beams with axial forces.” J. Struct. Div. 95 (9): 1887–1900. https://doi.org/10.1061/JSDEAG.0002353.
Mattock, A. H., and Z. Wang. 1984. “Shear strength of reinforced concrete members subject to high axial compressive stress.” ACI J. 81 (3): 287–298. https://doi.org/10.14359/10685.
Mitchell, D., R. Tinawi, and R. G. Sexsmith. 1991. “Performance of bridges in the 1989 Loma Prieta earthquake—Lessons for Canadian designers.” Can. J. Civ. Eng. 18 (4): 711–734. https://doi.org/10.1139/l91-085.
Nims, D. K., E. Miranda, I. D. Aiken, A. S. Whittaker, and V. V. Bertero. 1989. Collapse of the Cypress Street Viaduct as a result of the Loma Prieta earthquake. Rep. No. UCB/EERC-89/16. Berkeley: Earthquake Engineering Research Center, Univ. of California at Berkeley.
Pan, Z., and B. Li. 2013. “Truss-arch model for shear strength of shear-critical reinforced concrete columns.” J. Struct. Eng. 139 (4): 548–560. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000677.
Paulay, T., and M. N. Priestley. 1992. Seismic design of reinforced concrete and masonry buildings. Hoboken, NJ: Wiley.
Priestley, M. J. N., R. Verma, and Y. Xiao. 1994. “Seismic shear strength of reinforced concrete columns.” J. Struct. Eng. 120 (8): 2310–2328. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2310).
Regan, P. E. 1971. Shear in reinforced concrete—An experimental study. Technical Note 45. London: CIRIA.
Reineck, K.-H., and D. Dunkelberg. 2017. ACI-DAfStb databases 2015 on shear tests for evaluating relationships for the shear design of structural concrete members with and without stirrups. German Committee for Structural Concrete, Heft 617. Berlin: Beuth Verlag GmbH.
Shemy, O. 2021. “Shear strength of short shear-critical reinforced concrete columns.” M.Eng. thesis, Dept. of Civil Eng, McGill Univ.
Vecchio, F. J., and M. P. Collins. 1986. “The modified compression-field theory for reinforced concrete elements subjected to shear.” ACI J. 83 (2): 219–231.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jun 2, 2021
Accepted: Oct 27, 2021
Published online: Dec 13, 2021
Published in print: Feb 1, 2022
Discussion open until: May 13, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Rico J. Massa, William D. Cook, Denis Mitchell, Reversed-Cyclic Response of Shear-Critical Rectangular Bridge Columns, Journal of Bridge Engineering, 10.1061/(ASCE)BE.1943-5592.0001895, 27, 8, (2022).