Cyclic Behavior and Liquefaction of Sand Using Disturbed State Concept
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 126, Issue 9
Abstract
A general constitutive modeling concept called the disturbed state concept (DSC) is developed in this research for the stress-strain and liquefaction behavior of saturated sands. The DSC model is a unified approach and allows hierarchical modeling for options like elastic and elastoplastic responses, microcracking, damage, and softening. The DSC model parameters for saturated Ottawa sand are evaluated using data from multiaxial tests. The model predictions are found to provide satisfactory correlations with the test results. The DSC model with the foregoing parameters is implemented in a nonlinear dynamic finite-element program (DSC-DYN2D). It is used to solve a typical boundary value problem—a shake table test—involving liquefaction behavior. Based on the results, it can be stated that the DSC model is capable of both characterizing the cyclic behavior of saturated sands and identification of liquefaction.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akiyoshi, T., Matsumoto, H., Fuchida, K., and Fang, H. L. (1994). “Cyclic mobility behavior of sand by the three-dimensional strain space multi-mechanism model.” Int. J. Numer. and Analytical Methods in Geomech., 18(6), 397–415.
2.
Akiyoshi, T., Fang, H. L., Fuchida, K., and Matsumoto, H. (1996). “A nonlinear seismic response analysis method for saturated soil-structure systems with absorbing boundary.” Int. J. Numer. and Analytical Methods in Geomech., 20(5), 307–329.
3.
Alanazy, A. S., and Desai, C. S. (1996). “Testing and modeling of sand-steel interfaces under static and cyclic loading.” Dept. of Civ. Engrg. and Engrg. Mech. Rep., University of Arizona, Tucson, Ariz.
4.
Armaleh, S. H., and Desai, C. S. (1990). “Modeling include testing of cohesionless soils under disturbed state concept.” Rep. Prepared for the NSF, Dept. of Civ. Engrg. and Engrg. Mech., University of Arizona, Tucson, Ariz.
5.
Dafalias, Y. F., and Hermann, L. R. (1986). “Bounding surface plasticity. II: Application to isotropic cohesive soils.”J. Engrg. Mech., ASCE, 112(12), 1263–1291.
6.
Desai, C. S. (1974). “A consistent finite element technique for work-softening behavior.” Proc., Int. Conf. on Computational Methods in Nonlinear Mech., University of Texas at Austin, Austin, Tex.
7.
Desai, C. S. (1980). “A general basis for yield, failure, and potential functions in plasticity.” Int. J. Numer. and Analytical Methods in Geomech., 4, 361–375.
8.
Desai, C. S. ( 1995). “Chapter 8: Constitutive modeling using the disturbed state concept as microstructure self-adjustment concept.” Continuum models for materials with microstructure, H. B. Mühlhaus, ed., Wiley, Chichester, U.K.
9.
Desai, C. S. (1999). Mechanics of materials and interfaces: The disturbed state concept, CRC Press, Boca Raton, Fla.
10.
Desai, C. S. (2000a). . DSC-DYN2D—computer code for static and coupled consolidation and dynamic analysis: Manual parts I, II, and III, University of Arizona, Tucson, Ariz.
11.
Desai, C. S. (2000b). “Evaluation of liquefaction using disturbed state and energy approaches.”J. Geotech. and Geoenvir. Engrg., ASCE, 126(7), 618–631.
12.
Desai, C. S., and Galagoda, H. M. (1989). “Earthquake analysis with generalized plasticity model for saturated soils.” Earthquake Engrg. and Struct. Dyn., 18(6), 903–919.
13.
Desai, C. S., and Ma, Y. (1992). “Modeling of joints and interfaces using the disturbed state concept.” Int. J. Numer. and Analytical Methods in Geomech., 16(9), 623–653.
14.
Desai, C. S., Park, I. J., and Shao, C. (1998). “Fundamental yet simplified model for liquefaction instability.” Int. J. Numer. and Analytical Methods in Geomech., 22, 721–748.
15.
Desai, C. S., and Rigby, D. B. (1997). “Cyclic interface and joint shear device including pore pressure effects.”J. Geotech. and Geoenvir. Engrg., ASCE, 123(6), 568–579.
16.
Desai, C. S., Shao, C., and Park, I. J. (1997). “Disturbed state modeling of cyclic behavior of soils and interfaces in dynamic soil-structure interaction.” Proc., 9th IACMAG Conf., International Association for Computer Methods and Advancements in Geomechanics, Wuhan, China.
17.
Desai, C. S., Somasundaram, S., and Frantziskonis, G. (1986). “A hierarchical approach for constitutive modeling of geologic materials.” Int. J. Numer. and Analytical Methods in Geomech., 10(3), 225–257.
18.
Desai, C. S., and Toth, J. (1996). “Disturbed state constitutive modelling based on stress-strain and nondestructive behavior.” Int. J. Solids and Struct., 33(11), 1619–1650.
19.
Figueroa, J. L., Saada, A. S., Ling, L., and Dahisaria, N. M. (1994). “Evaluation of soil liquefaction by energy principles.”J. Geotech. Engrg., ASCE, 120(9), 1554–1569.
20.
Gyi, M. M., and Desai, C. S. (1996). “Multiaxial cyclic testing of saturated Ottawa sand.” Dept. of Civ. Engrg. and Engrg. Mech. Rep., University of Arizona, Tucson, Ariz.
21.
Ishihara, K. (1985). “Stability of natural deposits during earthquake.” Proc., 11th Int. Conf. on Soil Mech. and Found. Engrg., San Francisco, 1, 321–376.
22.
Kachanov, L. M. (1986). Introduction to continuum damage mechanics, Martinus Nijhoft, Dordrecht, The Netherlands.
23.
Katti, D. R., and Desai, C. S. (1995). “Modeling and testing of cohesive soil using disturbed state concept.”J. Engrg. Mech., ASCE, 121(5), 648–658.
24.
Mroz, Z., Norris, V. A., and Zienkiewicz, O. C. (1978). “An anisotropic hardening model for soils and its application to cyclic loading.” Int. J. Numer. and Analytical Methods in Geomech., 2, 203–221.
25.
Mühlhaus, H. B., ed. (1995). Continuum models for materials and microstructure, Wiley, Chichester, U.K.
26.
Park, I. J., and Desai, C. S. (1997). “Disturbed state modeling for dynamic and liquefaction analysis.” Rep. Prepared for the NSF, Dept. of Civ. Engrg. and Engrg. Mech., University of Arizona, Tucson, Ariz.
27.
Prevost, J. H. (1978). “Plasticity theory for soil stress-strain behavior.”J. Engrg. Mech. Div., ASCE, 104(5), 1177–1194.
28.
Prevost, J. H. (1982). “Nonlinear transient phenomena in elastic-plastic solids.”J. Engrg. Mech. Div., ASCE, 108(6), 1297–1311.
29.
Rigby, D. B., and Desai, C. S. (1995). “Testing, modeling, and application of saturated interfaces in dynamic soil-structure interaction.” Rep. Prepared for the NSF, Dept. of Civ. Engrg. and Engrg. Mech., University of Arizona, Tucson, Ariz.
30.
Roscoe, K. H., Schofield, A., and Wroth, C. P. (1957). “On the yielding of soils.” Géotechnique, London, 8, 22–53.
31.
Shao, C., and Desai, C. S. (2000). “Implementation of DSC model and application for analysis of field pile tests under cyclic loading.” Int. J. Numer. and Analytical Methods in Geomech., 24(6), 601–624.
32.
Weibull, W. A. (1951). “A statistical distribution function of wide applicability.” J. Appl. Mech., 18, 293–297.
33.
Zienkiewicz, O. C., Leung, K. H., and Hinton, E. (1982). “Earthquake response behavior of soils with damage.” Proc., Numer. Methods in Geomech., Z. Eisentein, ed.
Information & Authors
Information
Published In
History
Received: Feb 16, 1999
Published online: Sep 1, 2000
Published in print: Sep 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.