Physical Model Testing of Compaction Grouting in Cohesionless Soil
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 126, Issue 9
Abstract
Preliminary results of small-scale model compaction grouting tests performed in a geotechnical centrifuge are presented. The soil response to a one-stage grout bulb injection in dry uniform sand was examined at various prototype depths, and the effects of grout composition on grout bulb development and shape and on soil response are evaluated. Preliminary results indicate that the shape of the injected grout bulb is a function of overburden pressure. For specific grouting conditions, there is a maximum size that the grout bulb will achieve. Observed soil deformations were similar to those observed in models of deep uplift anchors. The addition of either clay or flyash to the grout mix reduced the ability to sustain high injection pressures.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Brown, D. R., and Warner, J. (1973). “Compaction grouting.”J. Soil Mech. and Found. Div., ASCE, 99(8), 589–601.
2.
Dai, X., and Borden, R. H. (1996). “The change of in-situ soil conditions induced by compaction grouting.” Dept. of Civ. Engrg. Rep., North Carolina State University, Raleigh, N.C.
3.
Fadl, M. O. ( 1981). “The behaviour of plate anchors in sand.” PhD thesis, University of Glasgow, Glasgow, U.K.
4.
Garner, S. J., Jefferies, M., and To, P. (1998). “Compaction grouting project completion report.” WAC Bennett Dam Sinkhole Remediation Project Rep. No. MEP414, BC Hydro Power Supply Engineering, Burnaby, Canada.
5.
Graf, E. D. (1969). “Compaction grouting technique.”J. Soil Mech. and Found. Div., ASCE, 95(5), 1151–1158.
6.
Graf, E. D. (1992). “Compaction grout.” Proc., Grouting, Soil Improvement and Geosynthetics, ASCE, Reston, Va., 275–287.
7.
Ivanetich, K. B., and Borden, R. H. (1996). “Shear strength and consolidation properties of compaction grout.” Dept. of Civ. Engrg. Rep., North Carolina State University, Raleigh, N.C.
8.
Mace, N., and Martin, G. R. (1996). “Ground remediation—aspects of the theory and approach to compaction grouting.” Proc., 6th Japan–U.S. Workshop on Earthquake Resistant Des. of Lifeline Fac. and Countermeasures against Soil Liquefaction, Tokyo.
9.
Ovesen, N. K. (1981). “Centrifuge tests of the uplift capacity of anchors.” Proc., 10th Int. Conf. on Soil Mech., Balkema, Rotterdam, The Netherlands, 717–722.
10.
Sutherland, H. B. (1988). “Uplift resistance of soils.” Géotechnique, London, 38(4), 493–516.
11.
Warner, J., Schmidt, N., Reed, J., Shepardson, D., Lamb, R., and Wong, S. (1992). “Recent advances in compaction grouting technology.” Proc., Grouting, Soil Improvement and Geosynthetics, ASCE, New York, 252–264.
12.
Warner, J., and Brown, D. R. (1974). “Planning and performing compaction grouting.”J. Soil Mech. and Found. Div., ASCE, 100(6), 653–666.
13.
Wong, H. Y. (1974). “Discussion of `Compaction grouting,' by Douglas R. Brown and James Warner.”J. Soil Mech. and Found. Div., ASCE, 100(5), 556–559.
14.
Younis, M. A. ( 1994). “Small scale physical modeling of compaction grouting.” MS thesis, University of Maryland at College Park, College Park, Md.
Information & Authors
Information
Published In
History
Received: Jul 8, 1999
Published online: Sep 1, 2000
Published in print: Sep 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.