Small Strain Stiffness of Natural Granitic Saprolite in Hong Kong
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 126, Issue 9
Abstract
Nonlinear stress-strain characteristics and shear stiffness-shear strain relationships of sedimentary soils and recompacted sands at small strains have been reported by many researchers. However, research work on the behavior of granitic soils at small strains has not attracted much attention, despite the fact that many countries around the world are underlain by granitic saprolites. In the study reported in this paper, shear stiffness of a natural granitic saprolite from Hong Kong has been investigated in the field, using the self-boring pressuremeter and geophysical techniques such as the suspension P-wave and S-wave logging method, and in the laboratory, using a triaxial apparatus equipped with internal displacement measuring devices. The observed stiffness-strain relationships of the natural granitic saprolite are highly nonlinear at small strains. Shear stiffness decreases significantly as shear strain increases. At very small shear strains (in the order of 0.001%), the elastic shear moduli deduced from the suspension S-wave logging method are generally consistent with the predictions made using an empirical correlation based on standard penetration test N values and also with the results of triaxial tests incorporating local displacement measurements. For shear strains larger than 0.01%, reasonable consistency can be found between the normalized shear stiffness-shear strain relationships obtained using the self-boring pressuremeter and from the triaxial apparatus.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abbiss, C. P. (1981). “Shear wave measurements of the elasticity of the ground.” Géotechnique, London, 31(1), 91–104.
2.
Arulnathan, R., Boulanger, R. W., and Riemer, M. F. (1998). “Analysis of bender element tests.” Geotech. Testing J., 21(2), 120–131.
3.
Atkinson, J. H., and Sallförs, G. (1991). “Experimental determination of stress-strain-time characteristics in laboratory and in-situ tests.” Proc., 10th Eur. Conf. Soil Mech. and Found. Engrg., Vol. 3, Balkema, Rotterdam, The Netherlands, 915–956.
4.
Brand, E. W. (1981). “Some thoughts on rain-induced slope failures.” Proc., 10th Int. Conf. Soil Mech. and Found. Engrg., Vol. 3, 373–376.
5.
Brand, E. W., Phillipson, H. B., Borrie, G. W., and Clover, A. W. (1983). “In-situ direct shear tests on Hong Kong residual soils.” Proc., Int. Symp. on Soil and Rock Investigations by In-Situ Testing, Vol. 2, 13–17.
6.
Burland, J. B. (1989). “Ninth Laurits Bjerrum memorial lecture: `Small is beautiful'—the stiffness of soils at small strains.” Can. Geotech. J., Ottawa, 26(4), 499–516.
7.
Burland, J. B., and Symes, M. (1982). “A simple axial displacement gauge for use in the triaxial apparatus.” Géotechnique, London, 32(3), 285–286.
8.
Clarke, B. G. (1995). Pressuremeters in geotechnical design, Blackie Academic and Professional.
9.
Clayton, C. R. I., and Khatrush, S. A. (1986). “A new device for measuring local axial strains on triaxial specimens.” Géotechnique, London, 36(4), 593–597.
10.
Clayton, C. R. I., Khatrush, S. A., Bica, A. V. D., and Siddique, A. (1989). “The use of Hall effect semiconductors in geotechnical engineering.” Geotech. Testing J., 12(1), 69–76.
11.
Coop, M. R., and Atkinson, J. H. (1993). “The mechanics of cemented carbonate sands.” Géotechnique, London, 43(1), 53–67.
12.
Cuccovillo, T., and Coop, M. R. (1997). “Yielding and pre-deformation of structured sands.” Géotechnique, London, 47(3), 491–508.
13.
Dobry, R. (1991). “Low and high-strain cyclic material properties.” Proc., NSF/EPRI Workshop on Dyn. Soil Properties and Site Characteristics, Chapter 3, CH2M HILL, Bellevue, Washington.
14.
Geological Society of London. (1990). “Geological society engineering group working party report: Tropical residual soils.” Quarterly J. Engrg. Geol., 23, 4–101.
15.
Geotechnical Control Office (GCO). (1982). “Mid-levels study: Report on geology, hydrology and soil properties.” Rep., Hong Kong Government, Hong Kong.
16.
Goto, S., Tatsuoka, F., Shibuya, S., Kim, Y. S., and Sato, T. (1991). “A simple gauge for local small strain measurements in the laboratory.” Soils and Found., Tokyo, 31(1), 169–180.
17.
Guide to site investigation (geoguide 2). (1987). Geotechnical Control Office, Civ. Engrg. Dept., Hong Kong Government, Hong Kong.
18.
Guide to rock and soil descriptions (geoguide 3). (1988). Geotechnical Control Office, Civ. Engrg. Dept., Hong Kong Government, Hong Kong.
19.
Guide to retaining wall design (geoguide 1). (1993). Geotechnical Control Office, Civ. Engrg. Dept., Hong Kong Government, Hong Kong.
20.
Imai, T., and Tonouchi, K. (1982). “Correlation of N value with S-wave velocity and shear modulus.” Proc., 2nd Eur. Symp. on Penetration Testing, Vol. 1, 67–72.
21.
Irfan, T. Y. (1996). “Mineralogy, fabric properties and classification of weathered granites in Hong Kong.” Quarterly J. Engrg. Geol., 29, 5–35.
22.
Ishihara, K. ( 1996). Soil behavior in earthquake geotechnics, Clarendon, Oxford, England, 68–72.
23.
Jardine, R. J., Symes, M. J., and Burland, J. B. (1984). “The measurement of soil stiffness in the triaxial apparatus.” Géotechnique, London, 34(3), 323–340.
24.
Lo Presti, D. C. F., Jamiolkowski, M., Pallara, O., Cavallaro, A., and Pedroni, S. (1997). “Shear modulus and damping of soils.” Géotechnique, London, 47(3), 603–618.
25.
Lumb, P. (1962). “The properties of decomposed granite.” Géotechnique, London, 12, 226–243.
26.
Lumb, P. (1965). “The residual soils of Hong Kong.” Géotechnique, London, 15, 180–194.
27.
Mackey, S., and Yamashita, T. (1967). “Soil conditions and their influence on foundations of waterfront structures in Hong Kong.” Proc., 3rd Asian Regional Conf. Soil Mech. and Found. Engrg., Vol. 1, 220–224.
28.
Mair, R. J. (1993). “Developments in geotechnical engineering research: Application to tunnels and deep excavations.” Proc., Instn. Civ. Engrs., London, 93(February), 27–41.
29.
Malone, A., Ng, C. W. W., and Pappin, J. (1997). “Invited discussion paper: Displacements around deep excavations in completely decomposed granite.” Proc., 14th Int. Conf. Soil Mech. and Found. Engrg., Vol. 4, Balkema, Rotterdam, The Netherlands, 2325–2328.
30.
Ng, C. W. W., Bolton, M. D., and Dasari, G. R. (1995). “The small strain stiffness of a carbonate stiff clay.” Soils and Found., Tokyo, 35(4), 109–114.
31.
Ng, C. W. W., and Lings, M. L. (1995). “Effects of modeling soil nonlinearity and wall installation on back-analysis of deep excavation in stiff clay.”J. Geotech. Engrg., ASCE, 121(10), 687–695.
32.
Nigbor, R. L., and Imai, T. ( 1994). “The suspension P-S velocity logging method.” Geophysical characterisation of sites, R. D. Woods, ed., International Science Publisher, 57–61.
33.
Ogura, K. (1979). “Development of the suspension type S-wave log system.” Oyo Tech. Rep. No. 1, 143–159.
34.
Pun, W. K., and Ho, K. K. S. ( 1996). “Analysis of triaxial tests on granitic saprolite performed at Public Works Central Laboratory.” Discussion Note DN 4/96. Geotechnical Engineering Office, Hong Kong Government of the Special Administrative Region, Hong Kong.
35.
Rawlings, J. O. (1988). Applied regression analysis: A research tool, Wadsworth and Brooks/Cole Advanced Books and Software, Pacific Grove, Calif.
36.
Richardson, D. ( 1988). “Investigations of threshold effects in soil deformation.” PhD thesis, City University, London.
37.
Salgado, R., Drnevich, V. P., Ashmawy, A., Grant, W. P., and Vallenas, P. (1997). “Interpretation of large-strain seismic cross-hole tests.”J. Geotech. and Geoenvir. Engrg., ASCE, 123(4), 382–388.
38.
Shelton, J. C., and Cooper, A. J. ( 1984). “The shear strength of decomposed granite from Glenealy area.” Technical Note TN 1/84, Geotechnical Control Office, Hong Kong Government, Hong Kong.
39.
Shen, C. K., Ng, C. W. W., Tang, W. H., and Rigby, D. (1997). “Invited discussion paper: Testing a friction barrette in decomposed granite in Hong Kong.” Proc., 14th Int. Conf. Soil Mech. and Found. Engrg., Vol. 4, Balkema, Rotterdam, The Netherlands, 2423–2426.
40.
Simpson, B. (1992). “Thirty-second Rankine lecture: Retaining structures: Displacement and design.” Géotechnique, London, 42(4), 541–576.
41.
Skempton, A. W. (1986). “Standard penetration test procedures and the effects in sands of overburden pressure, relative density, particle size, ageing and overconsolidation.” Géotechnique, London, 36(3), 425–447.
42.
Stokoe, K. H., II, Hwang, S. K., and Lee, J. N. K. (1995). “Effect of various parameters on the stiffness and damping of soils at small strains.” Proc., Int. Symp. on Pre-Failure Deformation Characteristics of Geomaterials, Hokkaido 1994, Japan, Shibuya, Mitachi, and Miura, eds., Vol. 2, Balkema, Rotterdam, The Netherlands, 785–816.
43.
Strange, P. J. (1990). “The classification of granitic rocks in Hong Kong and their sequence of emplacement in Sha Tin, Kowloon and Hong Kong Island.” Geological Soc. of Hong Kong Newsletter, 8(1), 18–27.
44.
Sun, R. Y. F. ( 1999). “Small strain behavior of decomposed granite in relation to deep excavations in Hong Kong.” MPhil thesis, Hong Kong University of Science and Technology, Hong Kong.
45.
Tatsuoka, F., and Kohata, Y. (1995). “Stiffness of hard soils and soft rocks in engineering applications.” Proc., Int. Symp. on Pre-Failure Deformation Characteristics of Geomaterials, Hokkaido 1994, Japan, Shibuya, Mitachi, and Miura, eds., Vol. 2, Balkema, Rotterdam, The Netherlands, 947–1063.
46.
Viana Da Fonseca, A., Matos Fernandes, M., and Silva Cardoso, A. (1997). “Interpretation of a footing load test on a saprolitic soil from granite.” Géotechnique, London, 47(3), 633–651.
47.
Windle, D., and Wroth, C. P. (1977). “Use of self-boring pressuremeter to determine undrained properties of clays.” Ground Engrg., London, 10(6), 37–46.
48.
Wong, A. C. ( 1997). “Pilot study of application of self-boring pressure meter tests in granite saprolite.” Technical Note TN9/97, Geotechnical Engineering Office, Hong Kong Government of the Special Administrative Region, Hong Kong.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 126 • Issue 9 • September 2000
Pages: 819 - 833
History
Received: Mar 2, 1999
Published online: Sep 1, 2000
Published in print: Sep 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.