Concrete Cracking in Tension Members and Application to Deck Slabs of Bridges
Publication: Journal of Bridge Engineering
Volume 12, Issue 5
Abstract
Currently, estimations of the crack width in the deck slab of bridges given by codes of practice are based on either theoretical or empirical approaches considering mainly the monotonic loading behavior. However, cracking in reinforced tensile members is highly influenced by the loading history (including both the loading and unloading processes) because of the irreversible nonlinear behavior of bond and of tensile response of concrete, resulting into residual cracks of non-negligible width. This paper investigates the influence of this phenomenon and presents a physical model describing it. An analytical model is developed and its results are compared to various tests with good agreement. Finally, a simple design formula is derived and recommendations for its application to practical cases are proposed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work described in this paper was funded by the Road Administration of the Canton du Jura, Switzerland. This work was performed within the framework of a design competition, with the aim to develop simple and scientifically based criteria to quantify the serviceability limit state of prestressed and composite bridges. The writers are appreciative of the support received.
References
Alvarez, M. (1998). “Influence of bond behaviour in the deformation capacity of reinforced concrete.” Ph.D. thesis, Einfluss des Verbundverhaltens auf das Verformungsvermögen von Stahlbeton, IBK, Eidgenössische Technische Hochschule Zürich, Zürich, Switzerland (in German).
Balázs, G. L. (1991). “Fatigue of bond.” ACI Mater. J., 88(6), 620–629.
Comité Euro-International du Béton (CEB-FIP). (1990). Model code for concrete structures, Lausanne, Switzerland.
Comité Européen de Normalisation (CEN). (2004). Eurocode 2: Design of concrete structures—Part 1–1: General rules and rules for buildings, Brussels, Belgium.
DeStefano, R. J., Evans, J., Tadros, M. K., and Sun, C. (2003). “Flexural crack control in concrete bridge structures.” 3rd Proc., Int. Sym. on High Performance Concrete (ISHPC), Orlando, Fla.
Farra, B., and Jaccoud, J.-P. (1993). “Influence of concrete and reinforcement on cracking of concrete structures.” Test Rep. of Short-Term Imposed Strains on Ties, IBAP, Pub. 140, École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland (in French).
Frosch, R. J. (1999). “Another look at cracking and crack control in reinforced concrete.” ACI Struct. J., 437–442.
Gergely, P., and Lutz, L. A. (1968). “Maximum crack width in reinforced concrete flexural members.” Causes, mechanism and control of cracking in concrete, SP-20, American Concrete Institute, Farmington Hills, Mich., 87–117.
Giuriani, E. (1981). “Experimental investigation on the bond-slip law of deformed bars in concrete.” IABSE Colloquium Delft 1981, Advanced Mechanics of Reinforced Concrete, Rep. of the Working Commissions, Vol. 34, International Association for Bridge and Structural Engineering, Switzerland, 121–142.
Gómez Navarro, M., and Lebet, J.-P. (2001). “Concrete cracking in composite bridges: Tests, models and design proposals.” Struct. Eng. Int. (IABSE, Zurich, Switzerland), 11(3), 184–190.
Hillerborg, A., Modéer, M., and Petersson, P. E. (1976). “Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements.” Cem. Concr. Res., 6, 773–782.
Hordijk, D. A. (1991). “Local approach to fatigue of concrete.” Ph.D. thesis, Technische Universiteit Delft, W. D. Meinema, ed., Delft, The Netherlands.
Hordijk, D. A. (1992). Tensile and tensile fatigue behaviour of concrete; Experiments, modelling and analysis, Heron, Lab. Sterin, Technische Univ. Delft, , Delft, The Netherlands.
Jaccoud, J.-P., and Charif, H. (1987). “Minimal reinforcement for crack control on concrete structures.” Final Test Rep., Series C, IBAP, Pub. 114, École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland.
Kenel, A. (2001). “Flexural behaviour and minimal reinforcement in reinforced concrete structural members.” Ph.D. thesis, IBK, Eidgenössische Technische Hochschule Zürich, Zürich, Switzerland (in German).
Laurencet, P. (1999). “Prestressing and minimal reinforcement for the control of the residual crack width.” Ph.D. thesis, IBAP, École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland (in French).
Laurencet, P., Jaccoud, J.-P., and Favre, R. (1997). “Cracking in prestressed concrete structures under cyclic loading.” Test Rep. IBAP, Pub. 145, École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland (in French).
Marti, P., Alvarez, M., Kaufmann, W., and Sigrist, V. (1998). “Tension chord model for structural concrete.” Struct. Eng. Int. (IABSE, Zurich, Switzerland), 8(4), 287–298.
Plaines, P., Tassios, T., and Vintzeleou, E. (1982). “Bond relaxation and bond-slip creep under monotonic and cyclic actions.” Proc. of the International Conference at Paisley, Paisley, France, 193–205.
Tassios, T. P. (1979). “Properties of bond between concrete and steel under load cycles idealizing seismic actions.” CEB Bulletin d’Information No. 131, Vol. 1, 67–121.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Sep 30, 2005
Accepted: Apr 24, 2006
Published online: Sep 1, 2007
Published in print: Sep 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.