Solid Waste Generation in Asphalt and Reinforced Concrete Roadway Life Cycles
Publication: Journal of Infrastructure Systems
Volume 13, Issue 2
Abstract
Conserving natural resources for future generations is a common objective of sustainable design and construction. Making use of materials in an efficient manner to improve sustainability is especially applicable on roadway construction projects which can consume significant quantities of materials. An understanding of how best to eliminate material waste on roadway projects requires knowledge of the amount of material waste generated during the various phases of the roadway life cycle. This paper presents a research study undertaken to quantify the amount of materials wasted during the roadway life cycle. The study included life-cycle inventory assessments (LCI) of a continuously reinforced concrete (CRC) roadway and an asphalt concrete (AC) roadway with respect to the waste generated from extraction of raw materials through the end-of-life (EOL) of the roadways. For the CRC roadway, waste was primarily generated at the roadway EOL, accounting for approximately 53% of the total amount of waste generated over the roadway’s entire life cycle. A similar trend was observed for the AC roadway in which 59% of the total waste occurred at EOL. For both CRC and AC roadways, waste created during placement of materials is almost negligible compared to that generated during the manufacturing phase and at EOL. The results suggest that application of sustainable concepts (reduce, recover, reuse, and recycle waste) and use of recycled instead of natural materials would help create sustainable roadways.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aquino, J. (2003). “C&D waste: A sometimes bumpy road to more attention.” MSW Management, 13(5), Forester Communications, Santa Barbara, Calif., ⟨http://ww.erosioncontrol.com/mw_0307_cd.html⟩ (January 2004).
Bossink, B. A. G., and Brouwers, H. J. H. (1996). “Construction waste: Quantification and source evaluation.” J. Constr. Eng. Manage., 122(1), 55–60.
Brooks, K. A., et al. (1994). “Germany’s construction and demolition debris recycling infrastructure: What lesson does it have for the US?” Proc., 1st Conf. of Conseil International du Bâtiment (Task Group 16), C. J. Kibert, ed., Center for Construction and Environment, Gainesville, Fla., 647–656 (in French).
Christensen, R. L. (1994). “Quantification of construction and demolition waste in Canada.” Sustainable Construction (Proc. 1st Conf. of Conseil International bu Bâtiment Task Group 16), C. J. Kibert, ed., Center for Construction and Environment, Gainesville, Fla., 223–230 (in French).
Collins, R. J., and Ciesielski, S. K. (1994). “Recycling and use of waste materials and by-products in highway construction.” National Cooperative Highway Research Program Synthesis of Highway Practice No. 199, Transportation Research Board, Washington, D.C.
Concrete Reinforcing Steel Institute (CRSI). (1999). Apparent rebar usage by region and market, Schaumburg, Ill.
Concrete Reinforcing Steel Institute (CRSI). (2004). “Recycling report.” Schaumburg, Ill., ⟨http://www.crsi.org/PDF/recycling_report.pdf⟩ (January 2004).
Craven, D. J., Okraglik, H. M., and Eilenberg, I. M. (1994). “Construction waste and a new design methodology.” Sustainable Construction, Proc., 1st Conf. of CIB TG 16, C. J. Kibert, ed., Center for Construction and Environment, Gainesville, Fla., 89–98.
Cross, S. A., and Parsons, R. L. (2002). Evaluation of expenditures on rural interstate pavements in Kansas, Kansas University Transportation Center, Univ. of Kansas, Lawrence, Kan.
The Environmental Council of Concrete Organizations (ECCO). (1997). Environmental lifecycle assessment, Skokie, Ill.
Etkin, D. S. (1999). “Marine oil spills worldwide: All sources.” Oil Spill Intelligence Rep. Statistical Series, Cutter Information Corp., Arlington, Mass.
Ferguson, J., Kermode, N., Nash, C. L., Sketch, W. A. J., and Huxford, R. P. (1995). Managing and minimizing construction waste—A practical guide, Institution of Civil Engineers, London.
Heino, E. (1994). “Recycling of construction waste.” Sustainable Construction, Proc., 1st Conf. of Conseil International du Bâtiment Task group 16), C. J. Kibert, ed., Center for Construction and Environment, Gainesville, Fla., 565–572 (in French).
Horvath, A., and Hendrickson, C. (1998). “Comparison of environmental implications of asphalt and steel-reinforced pavements.” Transportation Research Record. 1626, Transportation Research Board, Washington D.C., 105–113.
Lanting, R. W. (1993). “Stofstromen in de bouw en hef milieubeleid.” Ketenbeheer in de bouw, T. J. J. B. Wolters, ed., Samson Bedrijfsinformatie, Alphen aan den Rijn, The Netherlands, 25–38 (in Dutch).
Matos, G., and Wagner, L. (1998). “Consumption of materials in the United States, 1900–1995.” Annu. Rev. Energy Environ., 23, 107–22.
Mining, Minerals and Sustainable Development (MMSD). (2002). “Breaking new ground: The report of the Mining, Minerals, and Sustainable Development Project.” Mining, Minerals, and Sustainable Development (MMSD), Earthscan for International Institute for Environment Development (IIED) and World Business Council for Sustainable Development (WBCSD).
National Stone, Sand, and Gravel Association (NSSGA). (2003). “The impact of the crushed stone, sand and gravel industry on the U.S. economy.” Rep. Prepared by Stephen S. Fuller, Alexandria, Va.
Packard, R. G. (1994). “Pavement costs and quality.” Concr. Int., 16(8), 36–38.
Portland Cement Association (PCA). (2002). “Life cycle inventory of Portland cement manufacture—An appendix to environmental life cycle inventory of Portland cement concrete.” R&D serial no. 2095a, M. A. Nisbet, M. L. Marceau, and M. G. VanGeem, eds., Skokie, Ill.
Portland Cement Association (PCA). (2003). “Cement kiln dust production, management, and disposal.” R&D serial no. 2737, G. J. Hawkins, J. I. Bhatty, and A. T. O’Hare, eds., Skokie, Ill.
Rogoff, M. J., and Williams, J. F. (1994). Approaches to implementing solid waste recycling facilities, Noyes, Park Ridge, N.J.
Slag Cement Association (SCA). (2003). Sugar Land, Tex., ⟨http://www.slagcement.org⟩ (December 2003).
Stokoe, M. J., Kwong, P. Y., and Lau, May-Ming (1999). “Waste reduction—A tool for sustainable waste management for Hong Kong.” R’99 Recovery, Recycling, and Reintegration Proc., R’99 World Congress, A. Barrage and Y. Edelmann, eds., Geneva, EMPA, Vol. 5, 165–170.
Transportation Builder. (2003). “Eighth annual ranking of the top 300 federal highway contractors.” Transp. Builder, 10–20.
U.S. Department of Energy (U.S. DOE). (2002). Petroleum supply annual, 2001, Vol. 1, Energy Information Administration, Washington, D.C.
U.S. Department of Transportation/Federal Highway Administration and U.S. Environmental Protection Agency (U.S. DOT/FHwA and USEPA). (1993). “Engineering and environmental aspects of recycled materials for highway construction—Final report.” Rep. No. FHwA-RD-93-088, D. Bloomquist, G. Diamond, M. Oden, B. Ruth, and M. Tia, eds., Washington, D.C.
U.S. Environmental Protection Agency (USEPA). (1998). “Characteristics of building-related construction and demolition debris in the United States.” Rep. No. EPA530-R-98-010, Franklin Associates, Washington, D.C.
U.S. Geological Survey (USGS). (1998). “Materials flow and sustainability.” Fact sheet FS-068-98, Washington, D.C.
U.S. Geological Survey (USGS). (2004). Mineral commodity summaries, Washington, D.C.
Wagner, L. A. (2002). “Materials in the economy: Material flows, scarcity and the environment.” Circular 1221, U.S. Geological Survey, Washington, D.C.
Zapata, P., and Gambatese, J. A. (2005). “Energy consumption of asphalt and reinforced concrete pavement materials and construction.” J. Infrastruct. Syst., 11(1), 9–20.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Dec 14, 2004
Accepted: May 10, 2006
Published online: Jun 1, 2007
Published in print: Jun 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.