Model for Cyclic Inelastic Buckling of Steel Braces
Publication: Journal of Structural Engineering
Volume 134, Issue 4
Abstract
The paper presents a model for the inelastic buckling behavior of steel braces. The model consists of a force-based frame element with distributed inelasticity and fiber discretization of the cross section. With this approach, the response of the element can be derived by integration of the uniaxial stress-strain relation of the fibers and can account for kinematic and isotropic hardening as well as the Bauschinger effect of the material. The interaction between axial force and bending moment is thus accounted for. Even though the element only accounts for small deformations in the basic system, large displacement geometry is included in the nonlinear transformation of the force-deformation relation of the basic element following the concept of the corotational formulation. With this approach, two elements for each brace suffice to yield results that match an extensive set of experimental data of braces with different cross sections and slenderness ratios. Even though the model does not account for the effect of local buckling, this phenomenon does not seem to appreciably affect the global response of braces with compact sections.
Get full access to this article
View all available purchase options and get full access to this article.
References
AISC. (1997). “Seismic provisions for structural steel buildings.” American Institute of Steel Construction, Chicago.
Black, G. R., Wenger, B. A., and Popov, E. P. (1980). “Inelastic buckling of steel struts under cyclic load reversals.” UCB/EERC-80/40, Earthquake Engineering Research Center, Berkeley, Calif.
de Souza, R. M. (2000). “Force-based finite element for large displacement inelastic analysis of frames.” Ph.D. thesis, Univ. of California, Berkeley, Calif.
Filippou, F. C., and Fenves, G. L. (2004). “Methods of analysis for earthquake-resistant structures.” Earthquake engineering: From engineering seismology to performance-based engineering, Y. Bozorgnia and V. V. Bertero, eds., CRC, Boca Raton, Fla.
Filippou, F. C., Popov, E. P., and Bertero, V. V. (1983). “Effects of bond deterioration on hysteretic behavior of reinforced concrete joints.” UCB/EERC-83/19, Earthquake Engineering Research Center, Univ. of California, Berkeley, Berkeley, Calif.
Gugerli, H., and Goel, S. (1980). “Large scale tests for the hysteresis behavior of inclined bracing members.” Proc., 7th World Conf. on Earthquake Engineering, Istanbul, Turkey, 87–94.
Hall, J., and Challa, M. V. R. (1995). “Beam-column modeling.” J. Eng. Mech., 121(12), 1284–1291.
Ikeda, K., and Mahin, S. A. (1986). “Cyclic response of steel braces.” J. Struct. Eng., 112(2), 342–361.
Ikeda, K., Mahin, S. A., and Dermitzakis, S. N. (1984). “Phenomenological modeling of steel braces under cyclic loading.” UCB/EERC-84/09, Earthquake Engineering Research Center, Berkeley, Calif.
Jain, A. K., and Goel, S. (1979). “Seismic response of eccentric and concentric braced frames with different proportions.” UMEE 79R1, College of Engineering, Univ. of Michigan, Ann Arbor, Mich.
Jin, J., and El-Tawil, S. (2003). “Inelastic cyclic model for steel braces.” J. Eng. Mech., 129(5), 548–557.
Khatib, F., Mahin, S. A., and Pister, K. S. (1988). “Seismic behavior of concentrically braced steel frames.” UCB/EERC-88/01, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Lee, S., and Goel, S. C. (1987). “Seismic behaviour of hollow and concrete filled square tubular bracing members.” UMCE87-11, College of Engineering, Univ. of Michigan, Ann Arbor, Mich.
Liu, Z., and Goel, S. (1988). “Cyclic load behavior of concrete-filled tubular braces.” J. Struct. Eng., 114(7), 1488–1506.
McKenna, F. (1997). “Object oriented finite element programming frameworks for analysis, algorithms and parallel computing.” Ph.D. thesis, Univ. of California, Berkeley, Calif.
Sherman, D. R. (1976). “Application of steel tubing and pipe.” American Iron and Steel Institute, Washington, D.C.
Spacone, E., Filippou, F. C., and Taucer, F. F. (1996). “Fiber beam-column model for nonlinear analysis of RC frames. I: Formulation.” Earthquake Eng. Struct. Dyn., 25(7),711–725.
Uriz, P. (2005). “Towards earthquake resistant design of concentrically braced steel buildings.” Ph.D. thesis, Univ. of California, Berkeley, Berkeley, Calif.
Uriz, P., and Mahin, S. A. (2004). “Physical modeling and seismic vulnerability assessment of concentrically braced steel frames.” Proc., Annual Convention, Monterey, Calif.
Zayas, V. A., Popov, E. P., and Mahin, S. A. (1980). “Cyclic inelastic buckling of tubular steel braces.” UCB/EERC-80/16, Earthquake Engineering Research Center, Berkeley, Calif.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: May 31, 2005
Accepted: Oct 25, 2005
Published online: Apr 1, 2008
Published in print: Apr 2008
Notes
Note. Associate Editor: Donald W. White
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.