Explicit Inelastic Stiffness for Beam Elements with Uniform and Nonuniform Cross Sections
Publication: Journal of Structural Engineering
Volume 134, Issue 4
Abstract
The quasi-plastic-hinge approach proposed by Attalla et al. in 1994 for material nonlinear analysis is formulated using the total form expressions, which is generally computationally inefficient as numerical integrations and finite-difference schemes are required to obtain the elastic-plastic flexibility coefficients. To overcome the above drawback, the quasi-plastic-hinge approach is formulated in an incremental form for beams with uniform cross sections, by which the elastic-plastic flexibility coefficients are explicitly given. The procedure is directly extended to nonuniform beams through use of different moment-curvature relations for the two ends of the beam, or indirectly through subdivision of the beam into a number of inner segments. The elastic-plastic flexibility coefficients derived for both cases are also explicitly given. For comparison, three steel frames composed of nonuniform cross sections are studied, from which the accuracy of the proposed approaches for treating frames with uniform and nonuniform cross sections is verified.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The study reported herein is partly sponsored by the research project granted to the first writer by the National Science Council via grant number NSC 89-2211-E-002-124. This financial aid is gratefully acknowledged.
References
Attalla, M. R., Deierlein, G. G., and McGuire, W. (1994). “Spread of plasticity—Quasi-plastic-hinge approach.” J. Struct. Eng., 120(8), 2451–2473.
Clarke, M. J., Bridge, R. Q., Hancock, G. J., and Trahair, N. S. (1992). “Advanced analysis of steel building frames.” J. Constr. Steel Res., 23, 1–29.
El-Zanaty, M. H., Murray, D. W., and Bjorhovde, R. (1980). “Inelastic behavior of multistory steel frames.” Structural Engineering Rep., No. 83, Univ. of Alberta, Edmonton, Alberta, Canada.
Galambos, T. V. (1988). Guide to stability design criteria for metal structures, 4th Ed., Wiley, New York.
Galambos, T. V., and Ketter, R. L. (1959). “Columns under combined bending and thrust.” J. Engrg. Mech. Div., 85(2), 1–30.
Horne, M. R. (1979). Plastic theory of structures, 2nd Ed., Pergamon, Oxford, U.K.
Kanchanalai, T. (1977). “The design and behavior of beam-columns in unbraced steel frames.” CESRL Rep. No. 77-2, Univ. of Texas, Austin, Tex.
Korn, A., and Galambos, T. V. (1968). “Behavior of elastic-plastic frames.” ASCE J. Struct. Div., 94(5), 1119–1142.
Leu, L.-J., and Cheng, J.-C. (2000). “Flexibility based formulation for nonlinear analysis of reinforced concrete frames.” J. Chin. Inst. Eng., 23(1), 97–108.
Leu, L. J., and Tsou, C. H. (2001). “Second-order analysis of planar steel frames considering the effect of spread of plasticity.” Struct. Eng. Mech., 11(4), 423–442.
Liew, J. Y. R., White, D. W., and Chen, W. F. (1993a). “Second-order refined plastic-hinge analysis for frame design: Part I.” J. Struct. Eng., 119(11), 3196–3216.
Liew, J. Y. R., White, D. W., and Chen, W. F. (1993b). “Second-order refined plastic-hinge analysis for frame design: Part II.” J. Struct. Eng., 119(11), 3217–3237.
Liew, J. Y. R., White, D. W., and Chen, W. F. (1994). “Notional-load plastic-hinge method for frame design.” J. Struct. Eng., 120(5), 1434–1454.
McGuire, W., Gallagher, R. H., and Ziemian, R. D. (2000). Matrix structural analysis, 2nd Ed., Wiley, New York.
Taucer, F. F., and Filippou, F. C. (1991). “A fiber beam-column element for seismic response analysis of reinforced concrete structures.” Rep. No. UCB/EERC-91/17, Earthquake Engineering Research Center, College of Engineering, Univ. of California, Berkeley, Calif.
Teh, L. H., and Clarke, M. J. (1999). “Plastic-zone analysis of 3D steel frames using beam elements.” J. Struct. Eng., 125(11), 1328–1337.
White, D. W. (1993). “Plastic hinge methods for advanced analysis of steel frames.” J. Constr. Steel Res., 24(2), 121–152.
White, D. W., Liew, J. Y. R., and Chen, W. F. (1993). “Toward advanced analysis in LRFD.” D. W. White, and W. F. Chen, eds., Plastic hinge based methods for advanced analysis and design of steel frames, SSRC, Lehigh Univ., Bethlehem, Pa.
Yang, Y. B., and Kuo, S. R. (1994). Theory and analysis of nonlinear framed structures, Prentice-Hall, Singapore.
Yang, Y. B., and Shieh, M. S. (1990). “Solution method for nonlinear problems with multiple critical points.” AIAA J., 28(12), 2110–2116.
Zhou, S. P., and Chen, W. F. (1994). “Plastic-zone analysis of beam-columns and portal frames.” W. F. Chen, and S. Toma, eds., Advanced analysis of steel frames: Theory, software, and applications, CRC Press, Boca Raton, Fla.
Ziemian, R. D., and McGuire, W. (2002). “Modified tangent modulus approach: A contribution to plastic hinge analysis.” J. Struct. Eng., 128(10), 1301–1307.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Oct 17, 2006
Accepted: May 8, 2007
Published online: Apr 1, 2008
Published in print: Apr 2008
Notes
Note. Associate Editor: Enrico Spacone
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.