Shear Response of Concrete-Filled FRP Composite Cylindrical Shells
Publication: Journal of Structural Engineering
Volume 132, Issue 6
Abstract
This paper presents an analytical procedure for predicting the shear load-deformation response of concrete filled fiber-reinforced polymer (FRP) composite cylindrical shells with full- and noncomposite behavior. The approach is based on a sectional layered analysis with an iterative algorithm to achieve equilibrium and compatibility conditions of the FRP/concrete system, including the cracked behavior of the FRP-confined concrete, until first-ply failure of the FRP composite. The model follows first order mechanics for the shear behavior of structural members in combination with a smeared shear modulus for cracked concrete and inclusion of extension/shear coupling effects of anisotropic FRP laminates. Comparisons of the analytical response with available experimental data from large- and small-scale tests were found to be in reasonable agreement and corroborated the significant influence of the concrete core and the composite interaction details on the shear load-deformation response. Parametric studies on the influence of concrete properties, axial loads, and FRP laminate design are discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
The research described in this paper was funded by a grant from the University of California, San Diego in support of the I-5/Gilman Advanced Technology Bridge project, which is gratefully acknowledged.
References
Ahmad, I. (2004). “Shear response and bending fatigue behavior of concrete-filled fiber reinforced polymer tubes.” Ph.D. dissertation, North Carolina State Univ., Raleigh, N.C.
Bhide, K. M. (2002). “Shear response of concrete filled circular fiber-reinforced polymer composite tubes.” Master's thesis, Michigan State Univ., East Lansing, Mich.
Burgueño, R. (1999). “System characterization and design of modular fiber reinforced polymer (FRP) short and medium-span bridges.” Doctoral dissertation, Univ. of California, San Diego.
Collins, M. P., and Mitchell, D. (1997). Prestressed concrete structures, Response Publications, Toronto, 343–374.
Davol, A. (1998). “Mechanical characterization of concrete filled FRP members.” Doctoral dissertation, Univ. of California, San Diego.
Davol, A., Burgueño, R., and Seible, F. (2001). “Flexural behavior of circular concrete filled FRP shells.” J. Struct. Eng., 127(7), 810–817.
Fam, A. Z., and Rizkalla, S. H. (2001). “Behavior of axially loaded concrete-filled circular fiber reinforced polymer tubes.” ACI Struct. J., 98(3), 280–289.
Fam, A. Z., and Rizkalla, S. H. (2002). “Flexural behavior of concrete-filled fiber-reinforced polymer circular tubes.” J. Compos. Constr., 6(2), 123–132.
Jones, R. M. (1975). Mechanics of composite materials, Scripta, Washington, D.C.
Keller, T. (2002). “Overview of fibre-reinforced polymers in bridge construction.” Struct. Eng. Int. (IABSE, Zurich, Switzerland), 12(2), 66–70.
Kupfer, H., Hilsdor, H. K., and Rüsch, H. (1969). “Behavior of concrete under biaxial stresses.” J. Am. Concr. Inst., 66(8), 656–666.
Love, A. E. H. (1944). Mathematical theory of elasticity, 4th Ed., Dover, New York, 329–348.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988). “Theoretical stress-strain model for confined concrete.” J. Struct. Eng., 114(8), 1804–1826.
Mirmiran, A., and Shahawy, N. (1997). “Behavior of concrete columns confined by fiber composites.” J. Struct. Eng., 123(5), 583–590.
Mirmiran, A., Shahawy, M., El Khoury, C., and Naguib, W. (2000). “Large beam-column tests on concrete filled composite tubes.” ACI Struct. J., 97(2), 268–276.
Priestley, M. J. N., Seible, F., and Calvi, G. M. (1996). Seismic design and retrofit of bridges, Wiley, New York.
Seible, F., Karbhari, V. M., and Burgueño, R. (1999). “Kings stormwater channel and I-5/Gilman Bridge.” Struct. Eng. Int. (IABSE, Zurich, Switzerland), 9(4), 250–253.
Timoshenko, S. P., and Gere, J. M. (1972). Mechanics of materials, Van Nostrand, New York, 128–130.
Vecchio, J. V., and Collins, M. P. (1986). “The modified compression field theory for reinforced concrete elements subjected to shear.” ACI Struct. J., 83(2), 219–231.
Vecchio, J. V., and Collins, M. P. (1988). “Predicting the response of reinforced concrete beams subjected to shear using modified compression field theory.” ACI Struct. J., 85(3), 258–268.
Xiao, Y., Wu, H., and Martin, G. R. (1999). “Prefabricated composite jacketing of RC columns for enhanced shear strength.” J. Struct. Eng., 125(3), 255–264.
Zhu, R. R. H., Hsu, T. T. C., and Lee, J.-Y. (2001). “Rational shear modulus for smeared-crack analysis of reinforced concrete.” ACI Struct. J., 98(4), 443–450.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Aug 18, 2003
Accepted: Oct 19, 2005
Published online: Jun 1, 2006
Published in print: Jun 2006
Notes
Note. Associate Editor: Jin-Guang Teng
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.