Journal of Bridge Engineering

In order to enhance the effectiveness of portland cement overlays placed over existing bridge decks, the deck may be sealed with an acceptable sealer before placing the overlay. The main purpose for such a treatment of the deck is to seal the existing cracks, and prevent penetration of chlorides into the deck if the overlay cracks. The presence of a sealer at the deck-overlay interface is expected to reduce the available bond strength. The reported research was carried out to investigate the performance of overlays placed over sealed bridge decks, examine the level of bond strength, and develop simple yet effective means to restore the bond strength as much as possible. Test results indicate that the sealer reduces the available bond strength by as much as 50%. Up to 85% of the bond strength can be restored if sand is broadcast over the sealer while it is curing or if the dried sealed surface is lightly sanded. These observations were validated through fatigue loading and loading to failure of a one-third-scale subassemblage of a steel stringer bridge.

This work describes some of the most interesting aspects of the experimental and numerical dynamic analyses of the Luiz I Bridge, an old arch double-deck iron bridge, when subjected to the moving loads of the new light metro of Porto. Presented are the methodology and computational tools developed, as well as some of the most significant results obtained from numerical simulations conducted on the basis of an experimentally calibrated finite-element model, both in terms of structural safety and of the comfort of pedestrians and train passengers.

The significance for inelastic design of moment-inelastic rotation behavior with respect to interior pier sections of steel girder bridges is experimentally investigated. Under center span loading conditions, 12 welded, built-up, simply supported beams with various slenderness ratios of the flange and web plates are tested. In this test, lengths and locations for partial longitudinal stiffeners on the web plates are varied, and the results are then compared with the inelastic deformation capacity of beams without longitudinally stiffened web plates. The results are also compared with the inelastic design code in AASHTO LRFD bridge design specifications. It is concluded that (1) the ultimate strength of stiffened beams is governed by the local buckling at the compression flange of the far end from the loading point due to the presence of a partial longitudinal stiffener; and (2) the inelastic rotation capacity and ultimate strength of a beam with a stiffened web plate are remarkably improved. The optimum length and location of stiffeners on the plates are given.

Many steel bridges built prior to 1960 have bridge deck connections that are subject to high cycle fatigue. These connections may be nearing their fatigue limit and will require increased inspection and repair over the next 10–20 years. The Winchester Bridge on Interstate 5 in Roseburg, Ore., required the extensive replacement of connection details because of fatigue crack growth. This report describes the results of a study to assess the loading conditions for the connection details on the Winchester Bridge. Finite-element modeling methods were used to characterize the structure, on both a global and local level. The global model provided the boundary conditions for the local model of the connection details. The local model included the effects of rivet preload and friction. Finite-element analysis results were validated by hand calculation. The analysis showed significant variation in connection detail stress range, depending on the detail’s longitudinal and lateral location.

This paper deals with analyses and reduced scale tests carried out to validate the design of flexible protection structures for bridge piers against ship impact. The protection system analyzed is part of the fixed link currently under construction across the Parana River between the cities of Rosario and Victoria in Argentina, and it will protect a cable-stayed bridge and parts of the approach viaduct against impact of aberrant vessels with sizes up to 100,000 DWT. The protection system was designed on the basis of dissipated energy and consists of groups of steel-encased large diameter concrete piles connected at the top by a reinforced concrete platform. The impact energy is to be absorbed by large horizontal displacements of the pile caps that involve large deformations of the surrounding soil and geometrically and material nonlinear response of the pile shafts themselves. The paper focuses on modeling the nonlinear characteristics of the response of the structure, and on its assessment by means of 1:15 scale model tests performed in both the laboratory and in the field to account for the displacements and deformations undergone by the pile shafts.

This paper demonstrates the application of the strain wedge (SW) model to assess the response of laterally loaded isolated long piles, drilled shafts, and pile groups in layered soil (sand and/or clay) and rock deposits. The basic goal of this paper is to illustrate the capabilities of the SW model versus other procedures and approaches. The SW model has been validated and verified through several comparison studies with model- and full-scale lateral load tests. Several factors and features related to the problem of a laterally loaded isolated pile and pile group are covered by the SW model. For example, the nonlinear behavior of both soil and pile material, the soil-pile interaction (i.e., the assessment of the $p-y$ curves rather than the adoption of empirical ones), the potential of soil to liquefy, the interference among neighboring piles in a pile group, and the pile cap contribution are considered in SW model analysis. The SW model analyzes the response of laterally loaded piles based on pile properties (pile stiffness, cross-sectional shape, pile-head conditions, etc.) as well as soil properties. The SW model has the capability of assessing the response of a laterally loaded pile group in layered soil based on more realistic assumptions of pile interference as compared to techniques and procedures currently employed or proposed.