Reviewers

The Technical Activities Division of the Structural Engineering Institute and the editors of the Journal of Structural Engineering wish to express their appreciation for the contributions of the following individuals who served as reviewers during the period of August 1, 2004 to July 31, 2005.The Associate Editors of the Journal make every effort to compile the names of all reviewers who assisted in the review process; however, some names may have been left out inadvertently. If you served as a reviewer during the period indicated above, please contact the editor of the Journal so that your name can be included in a supplementary list to be published in the January issue of the Journal.

Ali AbolmaaliUniversity of Texas at Arlington

Dan AbramsUniversity of Illinois, Urbana

Doug AdamsPurdue University

Sándor ÁdányBudapest University of Technology and Economics, Hungary

Perry AdebarUniversity of British Columbia, Canada

Abi AghayereRochester Institute of Technology

Mohamed Ali General Electric, Albany, N.Y.

Anil Kumar AgrawalCity University of New York

Goodarz AhmadiClarkson University, Potsdam, N.Y.

A. Emin AktanDrexel University, Philadelphia

Sreenivas, AlampalliNew York State Department of Transportation, Albany

Riadh Al-MahaidiMonash University, Australia

Amde AmdeUniversity of Maryland

Jim C. AndersonUniversity of Southern California

J. Dario Aristizabal-OchoaNational University School of Mines, Colombia

Mark AschhiemSanta Clara University, Calif.

Richard AventLouisiana State University, Baton Rouge

Ashraf AyoubUniversity of Missouri, Rolla

Bilal AyyubUniversity of Maryland

Atorod AzizinaminiUniversity of Nebraska, Lincoln

Thomas BaberUniversity of Virginia, Charlottesville

Robert, BachmanConsulting Engineer, Sacramento, Calif.

Richard BallingBrigham Young University

Amy BarthSAI Consulting Engineers, Morgantown, W.V.

Karl BarthUniversity of West Virginia, Morgantown

Eduardo BatistaFederal University of Rio de Janeiro, Brazil

Jimmy BaylotU.S. Army Engineer Research and Development Center, Vicksburg, Miss.

Zdenek BazantNorthwestern University

James L. BeckCalifornia Institute of Technology, Pasadena

Richard BehrPennsylvania State University

Abdeljelil, BelarbiUniversity of Missouri-Rolla

Donald BenderWashington State University, Pullman

Richard M. BennettUniversity of Tennessee, Knoxville

Evan BentzUniversity of Toronto, Canada

Dionisio BernalNortheastern University, Boston

Attila BeresPortland Cement Association, Los Angeles, Calif.

Raimondo BettiColumbia University

Asghar BhattiUniversity of Iowa, Iowa City

Franz BijlaardDelft University of Technology, The Netherlands

Baris BiniciMiddle East Technical University, Ankara, Turkey

Peter BirkemoeUniversity of Toronto

Luke A. BisbyQueen’s University, Kingston, Canada

Basu BiswajitTrinity College, Dulin, Ireland

Hans BlassUniversity of Karlsruhe, Germany

Marcial BlondetCatholic University of Peru, Lima, Peru

John BolanderUniversity of California at Davis

John BonacciUniversity of Toronto

P. R. BoseDelhi College of Engineering, India

Charles BowenOklahoma State University, Stillwater

Mark D. BowmanPurdue University

Yousef BozorgniaPacific Earthquake Engineering Research Center, U.C. Berkeley

Joe BracciTexas A&M, College Station, Tex.

Mark, BradfordUniversity of New South Wales, Sydney, Australia

Mikael BraestrupCopenhagen, Denmark

Sergio BrenaUniversity of Massachusetts, Amherst

Rune BrinckerAalborg University, Denmark

Roger BrockenbroughPittsburgh, Pa.

JoAnn BrowningUniversity of Kansas

Michel BruneauUniversity at Buffalo, N.Y.

Andrew BudekTexas Tech University

William BulleitMichigan Technological University

Harvey BurdUniversity of Oxford, U.K.

Rigoberto BurguenoMichigan State University

Oreste S. BursiUniversity of Trento, Italy

Juan CaicedoUniversity of South Carolina

Guido CamataUniversity of Chieti-Pescara, Italy

Dinar CamotimTechnical University of Lisbon, Portugal

Joan Ramon Casas-RiusUniversitat Politecnica de Catalunya, Barcelona, Spain

William CasperCasper/Phillips, Tacoma, Wash.

Necati CatbasUniversity of Central Florida, Orlando

Ario CeccottiUniversity of Florence, Italy

Charles ChadwellCal Poly, San Luis Obispo, Calif.

Rob Y. H. ChaiUniversity of California at Davis

Janice ChambersUniversity of Utah, Salt Lake City

Siu-Lai ChanThe Hong Kong Polytechnic University, China

Adrian M. ChandlerThe University of Hong Kong, China

Finley CharneyVirginia Polytechnic Institute, Blacksburg, Va.

Brian ChenWiss, Janney, Elstner Associates, Inc., Irving, Tex.

Helen ChenAmerican Iron and Steel Institute, Washington, D.C.

Zhen ChenUniversity of Missouri, Columbia

Geraldine CheokNIST, Gaithersburg, Md.

S. P. ChiewNanyang Technological University, Singapore

B. ChoiAreva, Lynchburg, Va.

Yoo San ChooNational University of Singapore

Richard ChristensonColorado School of Mines, Golden

Ying-Hei ChuiUniversity of New Brunswick, Canada

K. F. ChungThe Hong Kong Polytechnic University, China

Wonseok ChungKorea Railroad Research Institute, South Korea

Scott CivjanUniversity of Massachusetts, Amherst

Julie Mark CohenRed Roses Productions, New York

Robert J. ConnorPurdue University

Michael ConstantinouUniversity at Buffalo

Ron CookUniversity of Florida, Gainesville

Anne CopeReynolds, Smith and Hills Inc., Merritt Island, Fla.

Gene CorleyConstruction. Technical Lab, Skokie, Ill.

Chris CramerUSGS/University of Memphis, Memphis, Tenn.

Steve CramerUniversity of Wisconsin, Madison

James CrewsUnarco Material Handling Inc., Springfield, Tenn.

Siamak DaneshvaranAON Re, Inc., Chicago, Ill.

Tushar K. DattaIndian Institute of Technology, New Delhi, India

David DarwinUniversity of Kansas

William, DavidsUniversity of Maine

Juan C. De la LleraUniversidad Catolica de Chile, Santiago, Chile

Guido De RoeckKatholieke Universiteit Leuven, Heverlee, Belgium

Eduardo De SantiagoIllinois Institute of Technology, Chicago

John De WolfUniversity of Connecticut

Gregory G. DeierleinStanford University

George DeodatisColumbia University

Yunus DereSelcuk University, Konya, Turkey

Reginald DesRochesGeorgia Institute of Technology

Richard DevriesMilwaukee School of Engineering

Rajesh Prasad DhakalUniversity of Canterbury, New Zealand

Murat DicleciBradley University

Walter DilgerUniversity of Calgary

Christos DimouNational Technical University of Athens, Greece

David DinehartVillanova University

Ove DitlevsenTechnical University of Denmark

Charles DolanUniversity of Wyoming, Laramie

Daniel DolanWashington State University, Pullman

Mauro DolceUniversity of the Basilica, Potenza, Italy

Bo DowswellStructural Design Solutions, LLC, Birmingham, Ala.

Richard DrakeJS Dyer and Associates, Irvine, Calif.

Robert DriverUniversity of Alberta, Edmonton, Canada

Dan DubinaPolitehnica University of Timisoara, Romania

Laszlo DunaiBudapest University of Technology and Economics, Budapest, Hungary

Dat DuthinhNIST, Gaithersburg, Md.

Amit DuttaKellogg Brown & Root, Houston, Tex.

Shirley DykeWashington University, St. Louis, Mo.

Christopher EarlsUniversity of Pittsburgh

Samuel EasterlingVirginia Polytechnical University

Rolf EligehausenUniversität Stuttgart, Germany

Isaac ElishakoffFlorida Atlantic University, Boca Raton, Fla.

Bruce R. EllingwoodGeorgia Institute of Technology

Riadh El-MahaidiMonash University, Australia

Amr ElnashaiUniversity of Illinois at Urbana-Champaign

Sherif El-TawilUniversity of Michigan, Ann Arbor

Ken ElwoodUniversity of British Columbia, Vancouver, Canada

Robert EnglekirkEnglekirk & Sabol Consulting Structural Engineers, Los Angeles

Michael P. EnrightSouthwest Research Institute, San Antonio, Tex.

Asad EsmaeilyKansas State University, Manhattan

Allen C. EstesUnited States Military Academy, West Point, N.Y.

Peter FajfarUniversity of Ljubljana, Slovenia

Amir FamQueen’s University, Kingston, Ontario,

Maria Q. FengUniversity of California, Irvine

Andrew FiliatraultUniversity at Buffalo

Gregor FischerUniversity of Hawaii, Honolulu

James FisherComputerized Structural Design, Milwaukee, Wisc.

Richard FlayUniversity of Auckland, New Zealand

Robert FleischmanUniversity of Arizona, Tucson

Chris FoleyMarquette University, Milwaukee, Wisc.

Douglas FoutchUniversity of Illinois at Urbana-Champaign

Steven FoxCanadian Sheet Steel Building Institute, Cambridge, Canada

Massimo FragiocamoUniversity of Christchurch, New Zealand

Paolo FranchinUniversity of Rome “La Sapienza,” Rome, Italy

Jannette FrandsenLouisiana State University, Baton Rouge, La.

Dan FrangopolUniversity of Colorado, Boulder, Colo.

Karl FrankUniversity of Texas, Austin

Cathy FrenchUniversity of Minnesota

Kenneth FridleyUniversity of Alabama, Tuscaloosa

William FritzNIST, Gaithersburg, Md.

Robert FroschPurdue University

Gary FryTexas A&M University, College Station

Richard W. FurlongAustin, Tex.

Hitoshi FurutaKansai University, Osaka, Japan

Theodore V. GalambosUniversity of Minnesota

Pietro, GambarovaPolitecnico di Milano, Italy

Gabe V. GarciaNew Mexico State University, Las Cruces

Leroy GardnerImperial College London

Maria GarlockPrinceton University

James GarrettCarnegie Mellon University

Vincenzo GattuliUniversità di L’Aquila, Italy

Hanbin GeNagoya University, Japan

Janos GergelyUniversity of North Carolina, Charlotte

Kurt GerstleUniversity of Colorado, Boulder

Michel GhosnCity College of New York

Amir S. J. GilaniCalifornia Department of Transportation, Sacramento

Ian GilbertUniversity of New South Wales, Australia

Subhash GoelUniversity of Michigan, Ann Arbor

Rakesh GoelCalifornia Polytechnic State University, San Luis Obispo

Barry GoodnoGeorgia Institute of Technology

Perry GreenSteel Joist Institute, Myrtle Beach, S.C.

Nicholas GregorBechtel Corporation, San Francisco

Michael C. GriffithThe University of Adelaide, Australia

Don GriersonUniversity of Waterloo, Ontario, Canada

Mircea D. GrigoriuCornell University

David GromolaWeyerhaueser Corporation, Federal Way, Wash.

Gilbert Y. GrondinUniversity of Alberta, Edmonton, Canada

Shawn GrossVillanova University

Hong GuanGriffith University, Gold Coast Campus, Queensland, Australia

Murthy GuddatiNorth Carolina State University, Raleigh

Polat GulkanMiddle East Technical University, Ankara, Turkey

Abhinav GuptaNorth Carolina State University, Raleigh

Pawan GuptaPost-Tensioning Institute, Phoenix, Ariz.

Vinay K. GuptaIndian Institute of Technology, Kanpur, India

Kurt GurleyUniversity of Florida, Gainesville

Andy GuyaderCal Poly, San Luis Obispo

Rami Haj-AliGeorgia Institute of Technology

Jerome F. HajjarUniversity of Illinois, Urbana-Champaign

Tom HaleOffice of Statewide Health Planning and Development, Sacramento, Calif.

Marv HallingUtah State University

Ron HamburgerSimpson, Gumpertz, and Heger, San Francisco

Lin-Hai HanFuzhou University, Fuzhou City, China

Ariel HanaorNational Building Research Institute, Israel

Gregory HancockUniversity of Sydney, Australia

Linda HanniganPennsylvania State University

Robert HansonUniversity of Michigan, Ann Arbor

Mohamed HarajliAmerican University of Beirut, Lebanon

Hong HaoUniversity of Western Australia, Crawley, Australia

Kent HarriesUniversity of Pittsburgh

Alidad HashemiUniversity of California, Berkeley

Mohamed HassanEnglekirk Structural Engineers, Santa Ana, Calif.

Neil HawkinsUniversity of Illinois, Urbana-Champaign

Wanlong HeCity University of New York

Art HeidebrechtMcMaster University, Hamilton, Ontario, Canada

Todd HelwigUniversity of Texas at Austin, Austin

Ernesto Heredia-ZavoniInstituto Mexicano del Petroleo, Mexico

Stefan HerlebausTexas A&M, College Station

Reagan HermannUniversity of Houston

Eric HinesLeMessurier Consultants, Cambridge, Mass.

Keith D. HjelmstadUniversity of Illinois at Urbana-Champaign, Urbana

Eric HoUniversity of Western Ontario, Canada

Thomas C. T. HsuNew Jersey Institute of Technology, Newark, N.J.

Thomas HsuUniversity of Houston, Houston, TX

Ching-Tung HuangNational Center for Research in Earthquake Engineering, Taipei, Taiwan

Tara HutchinsonUniversity of California, Irvine

Paulus IrawanNanyang Technological University, Singapore

Nestor IwankiwHughes Associates, Chicago, Ill.

Bassam IzzudinImperial College London

Faryar JabbariUniversity of California, Irvine

Fatemeh JalayerCalifornia Institute of Technology

R. S. JangidIndian Institute of Technology Bombay, Mumbai, India

Arul JayachandranStructural Engineering Research Centre, Chennai, India

Alan P. JearyUniversity of Western Sydney, Blacktown Campus, Australia

Shuang JinFederal Highway Administration, McLean, Va.

Erik JohnsonUniversity of Southern California

Roger JohnsonUniversity of Warwick, Coventry, United Kingdom

Hyung-Jo JungSejong University, Korea

Se-Kwon JungGeorgia Institute of Technology

Amit KanvindeUniversity of California at Davis

Erol KaracabeyliForintek Canada Corp., Vancouver, BC

Ahsan KareemUniversity of Notre Dame

Mohsen KargahiWeidlinger Associates, Inc.

John KariotisKariotis and Associates, Sierra Madre, Calif.

Michael KasperskiRuhr-Universität Bochum, Bochum, Germany

Eduardo KauselMIT, Cambridge, Mass.

James KellyUniversity of California at Berkeley

Sam KigerUniversity of Missouri-Columbia, Columbia

Tracy Kijewski-CorreaUniversity of Notre Dame

Hyoung-Man KimThe Boeing Company, Houston

Sang Bum KimSamsung, Korea

Gregory KingsleyKL&A Inc., Golden, Colo.

H. KinugasaTokyo University of Science, Japan

David KirknerUniversity of Notre Dame

Güven KiymazIstanbul Kültür University, Istanbul, Turkey

Richard KlingnerUniversity of Texas, Austin

Chan Gee KohNational University of Singapore

Laszlo KollarBudapest University of Technology and Economics, Budapest, Hungary

Yasser KoranyMcMaster University, Hamilton, Ontario, Canada

Donald KossPennsylvania State University, University Park, Pa.

Vlassis KoumousisNational Technical University of Athens, Greece

Mervyn KowalskyNorth Carolina State University, Raleigh

Ted KrauthammerPennsylvania State University

Helmut KrawinklerStanford University

Michael KregerPurdue University

Anant KukretiUniversity of Cincinnati

Geoffrey L. KulakUniversity of Alberta, Edmonton, Canada

Suresh KumarRowan Williams Davies & Irwin Inc., Guelph, Ontario, Canada

Sashi K. KunnathUniversity of California at Davis

Yahya KuramaNotre Dame University

Narito KurataKajima Research Institute, Tokyo, Japan

Minho KwonGyeongsang National University, South Korea

Roger LaBoubeUniversity of Missouri-Rolla

L. LamThe Hong Kong Polytechnic University, China

Nelson LamUniversity of Melbourne, Parkville, Australia

Magnus LangsethNTNU, Trondheim, Norway

Jay LarsonAmerican Iron and Steel Institute, Washington, D.C.

Kincho LawStanford University

Dawn LehmanUniversity of Washington, Seattle

Robert LeichtiOregon State University, Corvallis

Roberto T. LeonGeorgia Institute of Technology

Jack LeskoVirginia Polytechnic Institute & State University

Qing Quan LiangUniversity of New South Wales, Sydney, Australia

Georg LindgrenLund University, Lund, Sweden

Phillip LineAmerican Forest and Paper Association, Washington, D.C.

Daniel LinzellPennsylvania State University, University Park, Pa.

Judy LiuPurdue University

Joseph LoferskiVirginia Tech, Blacksburg, Va.

Yew-Chaye LooGriffith University, Australia

Paulo LourençoUniversity of Minho, Portugal

Laura LowesUniversity of Washington, Seattle

Xilin LuTongji University, Shanghai, China

Warren LucasBrigham Young University

Eric M. LuiSyracuse University, N.Y.

Loren D. Lutes(Retired) Texas A&M University, College Station

Leroy LutzComputerized Structural Design, Milwaukee, Wisc.

Zhongguo “John” MaUniversity of Alaska, Fairbanks

Gregory MacRaeUniversity of Canterbury, Christchurch, New Zealand

Rob MadsenDevco Engineering, Inc., Corvallis, Ore.

M. K. S. MadugulaUniversity of Windsor, Ontario, Canada

Koichi MaekawaUniversity of Tokyo, Japan

M. MahendranQueensland University of Technology, Brisbane, Australia

Pentti MäkeläinenHelsinki University of Technology, Helsinki, Finland

Andrea MaleckSouth Dakota School of Mines and Technology, Rapid City

Praveen MalhotraF. M Global, Massachussets

James MalleyDegenkolb, San Francisco

Sanj MalushteBechtel Corporation/Johns Hopkins University, Md.

John B. ManderUniversity of Canterbury, New Zealand

Gaetano ManfrediUniversity of Naples Federico II, Naples, Italy

H. MangTechnical University, Viena, Austria

C. S. ManoharIndian Institute of Science, Bangalore, India

Mohamad MansourEnergo, Houston, Tex.

Pentti MarkelainenHelsinki University of Technology, Finland

Peter MartiSwiss Federal Institute of Technology ETH, Zurich

Zeno MartinAPA-The Engineered Wood Association, Tacoma, Wash.

Beatriz Martin-PerezUniversity of Ottawa, Canada

Fidelis MashiriMonash University, Victoria, Australia

Bruno MassicottePoly Montreal, Canada

Forrest MastersFlorida International University, Miami, Fla.

Vernon MatzenNorth Carolina State University, Raleigh

Cole McDanielWashington State University, Pullman, Wash.

Ricardo MedinaUniversity of Maryland, College Park

Armin MehrabiCTL Group, Skokie, Ill.

Robert MelchersUniversity of Newcastle, New South Wales, Australia

Ali MemariPennsylvania State University, University Park, Pa.

Priyan MendisThe University of Melbourne, Australia

Jeroen MenninkTNO, Delft, The Netherlands

Siva MettupalayamUniversity of Colorado, Boulder, Colo.

Thomas H. MillerOregon State University, Corvallis, Ore.

Duane MillerThe Lincoln Electric Company, Cleveland, Ohio

Eduardo MirandaStanford University

Amir MirmiranFlorida International University, Miami, Fla.

Paul MlakarU.S. Army Engineer Research and Development Center, Vicksburg, Miss.

Y. L. MoUniversity of Houston, Houston, Tex.

Jamshid MohammadiIllinois Institute of Technology, Chicago

Giorgio MontiUniversita “La Sapienza,” Rome, Italy

Franklin MoonDrexel University

Marina MorettiUniversity of Thessaly, Volos, Greece

René MotroUniversity Montpellier II, France

Sherif MouradCairo University, Egypt

Thomas MurrayVirginia Polytechnical University, Blacksburg, Va.

C. V. R. MurtyIndian Institute of Technology, Kanpur, India

Giuseppe MuscolinoUniversity of Messina, Italy

S. MuthukumarGeorgia Institute of Technology

Antoine E. NaamanUniversity of Michigan, Ann Arbor

Clay NaitoLehigh University

Hasum NajmRutgers University

Masayoshi, NakashimaKyoto University, Japan

James NauNorth Carolina State University, Raleigh

Edward NawyRutgers University

David A. NethercotImperial College of Science, Technology and Medicine, London

Ansgar NeuenhueuferCal Poly San Luis Obispo

Drahomir NovakBrno University of Technology, Czech Republic

Andrzej NowakUniversity of Nebraska, Lincoln

J.A. OchsendorfMassachusetts Institute of Technology

Irving OppenheimCarnegie Mellon University

Mario OrdazUNAM, Coyoacán, México

Andres OretaDe La Salle University, Manila, Philippines

Josko OzboltStuttgart University, Germany

Jeff PackerUniversity of Toronto, Canada

Stefano PampaninUniversity of Canterbury, Christchurch, New Zealand

PankajUniversity of Edinburgh, U.K.

Chris PantelidesUniversity of Utah, Salt Lake City

Gustavo Parra-MontesinosUniversity of Michigan, Ann Arbor, Mich.

Marco PetrangeliUniversity of Chieti-Pescara, Italy

Shahram PezeshkThe University of Memphis, Tenn.

Brent M. PharesIowa State University, Ames

Maryann PhippsEstructures, El Cerrito, Calif.

Yong Lin PiThe University of New South Wales, Australia

Jean Paul PinelliFlorida Institute of Technology

Giovanni PlizzariUniversity of Bergamo, Italy

David PollockWashington State University, Pullman

Dinos PolyzoisUniversity of Manitoba, Canada

John PopovicsUniversity of Illinois at Urbana-Champaign

Tanarat PotisukOregon State University

Jay A. PuckettUniversity of Wyoming, Laramie

Shamim RahmanNorth Carolina State University, Raleigh

Tony RahmanConsultant, Raleigh, N.C.

Durgesh C. RaiIndian Institute of Technology, Kanpur, India

Subramaniam RajanArizona State University

Osman RamadanCairo University, Egypt

Ananth RamaswamyIndian Institute of Science, Bangalore, India

Kim RasmussenUniversity of Sydney, Australia

Gian RassatiUniversity of Cincinnati

A. Ghani RazaqpurCarleton University, Canada

Eduardo ReinosoUniversidad Nacional Autonoma de Mexico, Mexico City

Jose RestrepoUniversity of California at San Diego

James RhodesUniversity of Strathclyde, Glagow, U.K.

Yuri RibakovThe College of Judea and Samaria, Ariel, Israel

Rafael RiddellUniversidad Catolica de Chile, Santiago, Chile

Michael RileyNational Institute of Standards and Technology, Gaithersburg, Md.

Terry M. RobertsCardiff University, Wales, U.K.

Carin Roberts-WollmannVirginia Tech., Blacksburg, Va.

Mario RodriguezUniversidad Nacional Autonoma de Mexico, Mexico City

Charles RoederUniversity of Washington, Seattle

Jeffery RoestlerUniversity of Illinois, Urbana

Colin A. RogersMcGill University, Montreal, Canada

Colin RogersMcGill University, Montreal, Canada

Stanley T. RolfeUniversity of Kansas, Lawrence

David RosowskyTexas A&M, College Station

Sonia RuizNational University of Mexico, Coyoacan, Mexico

Avigdor V. RutenbergTechnion-Israel Institute of Technology, Haifa, Israel

Kerry RyanUtah State University

Rafael SabelliDasse Design Inc., San Francisco

Ronald SackUniversity of Nevada, Las Vegas

Fahim SadekNational Institute of Standards and Technology, Gaithersburg, Md.

Sanjay SahasrabudheJ. Ray McDermott, Houston, Tex.

Alexander, SalinikovichLaval University, Quebec, Canada

Bijan SamaliUniversity of Technology, Sydney, Austrailia

Bhavani SankarUniversity of Florida, Gainseville

Victor SaoumaUniversity of Colorado, Boulder

Andrew SarawitSimpson Gumpertz & Heger Inc., Waltham, Mass.

Mehrdad SasaniNortheastern University, Boston, Mass.

S. R. Satish-KumarIndian Institute of Technology Madras, Chennai, India

Benjamin SchaferJohns Hopkins University

Peter SchaumannUniversität Hannover, Germany

Anshel J. SchiffPrecision Measurement Instruments, Los Altos Hills

Scott SchiffClemson University

Steven SchneiderConsultant, Vancouver, Wash.

John SchroederTexas Tech University, Lubbock, Tex.

Art SchultzUniversity of Minnesota

Reinhold SchusterUniversity of Waterloo, Canada

Giorgio SerinoUniversita’ degli studi di Napoli Federico II, Naples, Italy

Reynaud SerretteSanta Clara University, Calif.

Bahram ShahroozUniversity of Cincinnati, Ohio

N.S. ShanmugamUniversity of Singapore

Jia-Dzwan Jerry ShenTurner-Fairbank Highway Research Center, McLean, Va.

Harry “Tripp” Shenton IIIUniversity of Delaware

Donald ShermanUniversity of Wisconsin, Milwaukee

Shigeru ShimizuShinzu University, Nagano, Japan

P. Benson ShingUniversity of California at San Diego

Hitoshi ShioharaThe University of Tokyo, Japan

W. Lee ShoemakerMetal Building Manufacturers Association, Cleveland, Ohio

Manish ShrikhandeIndian Institute of Technology, Roorkee, India

Emil SimiuNIST, Gaithersburg, Md.

K.S. SivakumaranMcMaster University, Hamilton, Canada

Thomas SkaggsAPA-The Engineered Wood Association, Tacoma, Wash.

Robert SkeltonUniversity of California at San Diego

Ian SmithUniversity of New Brunswick, Canada

Ian SmithSwiss Federal Institute of Technology, Lausanne

Andrew SmythColumbia University

Hoon SohnCarnegie Mellon University

Elisa SotelinoVirginia Polytechnic Institute, Blacksburg

Ralph SouthwardSouthward Consultants Limited, Burlington, Canada

Enrico SpaconeUniversity of Chieti-Pescara, Italy

Billie F. Spencer Jr.University of Illinois at Urbana-Champaign

Thomas SputoUniversity of Florida, Gainesville

Srinivasan SridharanWashington University, St. Louis, Mo.

Sri SritharanIowa State Unviersity

Michael StallingsAuburn University

John StantonUniversity of Washington, Seattle

Mark G. StewartUniversity of Newcastle, New South Wales, Australia

Bozidar StojadinovicUniversity of California at Berkeley

Tim StratfordThe University of Edinburgh, U.K.

Ray K. L. SuThe University of Hong Kong, China

N. K. SubediUniversity of Dundee, U.K.

Emmett SumnerNorth Carolina State University, Raleigh

Andrea SurovekSouth Dakota School of Mines and Technology, Rapid City

Colby SwanUniversity of Iowa, Iowa City

James SwansonUniversity of Cincinnati, Ohio

Hiroyuki TagawaUniversity of Washington, Seattle

Yukio TamuraTokyo Polytechnics University, Japan

Andrew TaylorKPFF, Seattle, Wash.

Arturo Tena-ColunaUniversidad Nacional Autonoma de Mexico, Mexico City

J. G. TengThe Hong Kong Polytechnic University, China

Susanto TengNanyang Technological University, Singapore

Patrick TerriaultÉcole de Technologie Supérieure–Université du Québec

Steven ThomasVP Buildings, Inc., Memphis, Tenn.

James ThomsonOhio University, Athens, Ohio

Henry TielemanVirginia Polytechnical University, Blacksburg, Va.

Cem TopkayaMiddle East Technical University, Ankara, Turkey

Nicholas S. TrahairUniversity of Sydney, Australia

Robert TremblayEcole Polyteechnique, Montreal, Canada

Tom TrestainT.W.J. Trestain Structural Engineering, Toronto, Canada

Mihailo D. TrifunacUniversity of Southern California

Pan Tso-ChienNanyang Technological University, Singapore

Panos TsopelasThe Catholic University of America, Washington, D.C.

Gustavo TumialanSimpson-Gumpertz & Heger, Waltham, Mass.

C. C. (David) TungNorth Carolina State University, Raleigh

Koray TureyenWeiss-Janney-Elstner Assoc., Bingham, Farms, Mich.

Chia-Ming UangUniversity of California at San Diego

Asif UsmaniUniversity of Edinburgh, U.K.

Dimitri ValTechnion-Israel Institute of Technology, Haifa, Israel

Dimitrios VamvatsitkosStanford University

John Van de lindtColorado State University

Amit VarmaPurdue University

Frank VecchioUniversity of Toronto, Canada

Daniele VenezianoMassachusetts Institute of Technology

Carlos E. VenturaUniversity of British Columbia, Vancouver, Canada

Roberto VillaverdeUniversity of California, Irvine

Ton VrouwenvelderDelft University of Technology, The Netherlands

Alfonso VulcanoUniversity della Calabria, Arcavacata di Rende

Loc Vu-QuocUniversity of Florida, Gainesville

Stephanie WalkupWeiss-Janney-Elstner, Princeton, N.J.

Ned WaltzTrussJoist Corp., Boise, Id.

Baolin WanMarquette University, Milwaukee, Wisc.

Sheng Guo WangUniversity of North Carolina, Charlotte

Yong C. WangThe University of Manchester, U.K.

Lisa WangCalifornia State University at Ponoma

Ming WangUniversity of Illinois at Chicago

Qinglin WangXi’an University of Architecture & Technology, China

Jaap WardenierTechnical University of Delft, Netherlands

Jason WeissPurdue University

Donald W. WhiteGeorgia Institute of Technology

Andrew WhittakerUniversity at Buffalo, Buffalo, N.Y.

James WilcoskiU.S. Army Corp of Engineers

Roger WildtRW Consulting Group, Bethlehem, Pa.

Tim WilkinsonUniversity of Sydney, Australia

Eric WilliamsonUniversity of Texas, Austin

Thomas WilliamsonAPA-The Engineered Wood Association, Tacoma, Wash.

James WilsonDuke University

John L. WilsonThe University of Melbourne, Australia

Terry WipfIowa State University, Ames

Sharon, WoodUniversity of Texas at Austin

Y. F. WuCity University of Hong Kong, China

Yan XiaoUniversity of Southern California

Bin XuHunan University, Changsha, China

You Lin XuThe Hong Kong Polytechnic University, China

Swaroop YallaExponent Failure Analysis Associates, Menlo Park, Calif.

Charles YanceyNIST, Gaithersburg, Md.

J. YangWestinghouse, Hartford, Conn.

Jann YangUniversity of California, Irvine

Janet K. YatesSan Jose University, Calif.

Weijian YiHunan University, Changsha, China

Felix YokelNIST, Gaithersburg, Md.

Chai YooAuburn University

Ben YoungUniversity of Hong Kong, China

Cheng YuUniversity of North Texas, Denton, Tex.

Wei-Wen YuUniversity of Missouri, Rolla

Abdel Hamid ZaghwCairo University, Egypt

Seyed ZahraiUniversity of Tehran, Iran

Mehdi S. ZarghameeSimpson Gumpertz & Heger, Inc., Arlington, Mass.

Aspasia ZervaDrexel University, Philadelphia

Lixin Bob ZhangTechnip Offshore, Inc., Houston, Tex.

Ray ZhangColorado School of Mines, Golden, Colo.

Xiao-Ling ZhaoMonash University, Victoria, Australia

John ZhaoIGNS, Dunedin, New Zealand

Yin ZhouCPP Inc., Fort Collins, Colo.

Edward ZhouURS Corporation, Gaithersburg, Md.

Feng ZhouKyoto University, Uji, Japan

Ronald ZiemianBucknell University, Lewisburg, Pa.

Alessandro ZonaUniversity of Camerino, Italy