Structural Behavior of Concrete Slabs with Profiled Metal Decking: Experimental and Analytical Study
Publication: Practice Periodical on Structural Design and Construction
Volume 28, Issue 4
Abstract
Composite slab construction has become one of the most viable options for overcoming today’s challenges in the construction industry. The cohesion weakness between the main two components of such slabs—the concrete surface and profiled metal decking sheet—has been considered one of the problems limiting their wide applications. This research attempts to use the results of both experimental and numerical investigations in conjunction with the existing design methods to propose a design chart for profiled metal decking slabs. An experimental program was conducted on six full-scale specimens to investigate the effect of both the spacing of shear connectors and the ratio of the reinforcement mesh on the structural and bond behavior of the slabs. Following that, a three-dimensional (3D) finite-element (FE) model was developed to simulate the structural behavior of the slabs, and its reliability was evaluated in light of the experimental results. After that, the shear bond strength between the profiled metal decking sheet and the concrete was analytically evaluated using both the well-known m–k and partial shear connection (PSC) methods to verify the experimental results and clarify the limitations of using those methods. Ultimately, the verified FE model was adopted to find out the effect of the clear span–slab thickness ratio () on the behavior of the slabs. The experimental as well as numerical findings showed that the ultimate capacity of the profiled metal decking slab is dependent on the spacing of the shear connectors, the ratio of reinforcement mesh, and the clear span–slab thickness ratio.
Practical Applications
The research attains a practical application to improve the behavior of composite concrete slabs because they give maximum protection for lives in the event of earthquakes due to supporting the concrete slab from sudden and momentary collapse. The idea still needs to be developed, but for now, one can say that the use of a metal sheet installed in the bottom of the concrete slab acts as an additional steel reinforcement, and this is capable of increasing imposed load on the concrete slab as well as supporting it externally from sudden fracture.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code that support the findings of this study are available from the corresponding author upon reasonable request.
References
Abbas, H. S., S. A. Bakar, M. Ahmadi, and Z. Haron. 2015. “Experimental studies on corrugated steel-concrete composite slab.” Gradevinar 67 (3): 225–233. https://doi.org/10.14256/JCE.1112.2014.
Abdullah, R., and W. S. Easterling. 2009. “New evaluation and modeling procedure for horizontal shear bond in composite slabs.” J. Constr. Steel Res. 65 (4): 891–899. https://doi.org/10.1016/j.jcsr.2008.10.009.
Ali, T., S. Yehia, and M. El-Didamouny. 2020. “Review on the effect of shear connectors on composite deck slabs.” Int. J. Adv. Eng. Manage. Sci. 6 (12): 577–580. https://doi.org/10.22161/ijaems.612.14.
ASTM. 2020. Standards specification for steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hot-dip process. A653-2020. West Conshohocken, PA: ASTM.
Avudaiappan, S., et al. 2021. “Experimental investigation on composite deck slab made of cold-formed profiled steel sheeting.” Metals 2021 (11): 229. https://doi.org/10.3390/met11020229.
Baskar, R., and C. A. Jeyasehar. 2012. “Experimental and theoretical studies on composite deck slabs.” Int. J. Eng. Res. Dev. 3 (12): 22–32.
BS (British Standards). 1994. Structural use of Steelwork in Building: Code of practice for design of composite slabs with profiled steel sheeting. BS 5950-4-1994. London: BS.
BS (British Standards). 2011. Cement composition, specifications and conformity criteria for common cements. BS EN197-2011. London: BS.
BS (British Standards). 2019. British standards for concrete mix design, concrete–Complementary British standard to BS EN 206. BS 8500–1-2019. London: BS.
Bursi, O. S., F. F. Sun, and S. Postal. 2005. “Non-linear analysis of steel–concrete composite frames with full and partial shear connection subjected to seismic loads.” J. Constr. Steel Res. 61 (1): 67–92. https://doi.org/10.1016/j.jcsr.2004.06.002.
CEN (European Committee for Standardization). 2004. Eurocode 4: Design of composite steel and concrete structures. Part 1-1: General rules and rules for buildings. EN 1994-1-1. Brussels, Belgium: CEN.
Chen, S., and X. Shi. 2011. “Shear bond mechanism of composite slabs–A universal FE approach.” J. Constr. Steel Res. 67 (10): 1475–1484. https://doi.org/10.1016/j.jcsr.2011.03.021.
ECP (Egyptian Code of Practice). 2020. Egyptian code of practice for design and construction of concrete structures, housing and building national research center (HBRC). ECP 203-2020. Cairo, Egypt: ECP.
ES (Egyptian Standards). 2021a. Egyptian standards for concrete aggregate: Egyptian organization for standards & quality. ES 1109-2021. Cairo, Egypt: ECP.
ES (Egyptian Standards). 2021b. Egyptian standards for steel reinforcement: Egyptian organization for standards & quality. ES 262-2021. Cairo, Egypt: ECP.
ES (Egyptian Standards). 2022. Egyptian standards for cement: Egyptian organization for standards & quality. ES 4756-1-2022. Cairo, Egypt: ECP.
Ferrer, M., F. Marimon, and M. Crisinel. 2006. “Designing cold-formed steel sheets for composite slabs: An experimentally validated FEM approach to slip failure mechanics.” Thin-Walled Struct. 44 (12): 1261–1271. https://doi.org/10.1016/j.tws.2007.01.010.
Hedaoo, N. A., L. M. Gupta, and G. N. Ronghe. 2012. “Design of composite slabs with profiled steel decking: A comparison between experimental and analytical studies.” Int. J. Adv. Struct. Eng. 4 (1): 1–15. https://doi.org/10.1186/2008-6695-3-1.
Kalamkar, S. S., and A. Akhare. 2016. “Analytical study on behaviour of composite slabs with profiled steel decking.” Int. J. Eng. Res. 5 (3): 654–657.
Manjunath, T. N., and B. S. Sureshchandra. 2014. “Experimental study on concrete slab with profiled steel decking.” Int. J. Eng. Res. Technol. 3 (7): 894–898.
Marimuthu, V., S. Seetharaman, S. A. Jayachandran, A. Chellappan, T. K. Bandyopadhyay, and D. Dutta. 2007. “Experimental studies on composite deck slabs to determine the shear-bond characteristic (m–k) values of the embossed profiled sheet.” J. Constr. Steel Res. 63 (6): 791–803. https://doi.org/10.1016/j.jcsr.2006.07.009.
Merool, V., and K. M. Patel Harshvadan. 2014. “Experimental study on composite deck with different aspect ratio.” Int. J. Struct. Civ. Eng. Res. 3 (2): 104–109.
Mistakidis, E., and K. Dimitriadis. 2008. “Bending resistance of composite slabs made with thin-walled steel sheeting with indentations or embossments.” Thin-Walled struct. 46 (2): 192–206. https://doi.org/10.1016/j.tws.2007.08.001.
Mohammed, B. S., M. A. Al-Ganad, and M. Abdullahi. 2011. “Analytical and experimental studies on composite slabs utilising palm oil clinker concrete.” Constr. Build. Mater. 25 (8): 3550–3560. https://doi.org/10.1016/j.conbuildmat.2011.03.048.
Patil, S. M., and M. Shahezad. 2014. “Experimental study on cold formed steel composite metal deck slab.” Int. J. Eng. Sci. Res. Technol. 3 (6): 201–205.
Qureshi, J., D. Lam, and J. Ye. 2011. “The influence of profiled sheeting thickness and shear connector’s position on strength and ductility of headed shear connector.” Eng. Struct. 33 (5): 1643–1656. https://doi.org/10.1016/j.engstruct.2011.01.035.
Sheik Rizwan, S. M., and R. Ravindra. 2018. “A study of affordable roofing systems with composite slab.” Int. J. Recent Innovation Trends Comput. Commun. 5 (8): 200–205.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Sep 29, 2022
Accepted: Jul 9, 2023
Published online: Aug 31, 2023
Published in print: Nov 1, 2023
Discussion open until: Jan 31, 2024
ASCE Technical Topics:
- Analysis (by type)
- Decks
- Engineering fundamentals
- Engineering materials (by type)
- Finite element method
- Materials engineering
- Metals (material)
- Methodology (by type)
- Models (by type)
- Numerical analysis
- Numerical methods
- Slabs
- Structural behavior
- Structural engineering
- Structural members
- Structural systems
- Three-dimensional models
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Abhijeet Dey, Arjun Sil, Application of ANN for Estimating Time-Variant Structural Reliability of Reinforced Concrete Structures Using Approximate Approach, Practice Periodical on Structural Design and Construction, 10.1061/PPSCFX.SCENG-1412, 29, 2, (2024).