Optimization-Based Analysis of Diagonal Tension Failure of Reinforced Concrete Dapped-End Beams
Publication: Journal of Structural Engineering
Volume 150, Issue 10
Abstract
This work was conducted first to devise an explicit equation for the ultimate strength of reinforced concrete dapped-end beams failing in diagonal tension caused by re-entrant corner cracks and second to gain insight into its mechanical behavior. To these ends, we introduce force equilibrium equations that explicitly account for the relevant internal force-resisting components: hanger reinforcement; dowel action of longitudinal reinforcement; concrete compression zone; aggregate interlock; and other reinforcement-related terms. These equations are solved within the framework of a constrained optimization problem. The solution process enables us to quantify the ultimate strength and the contributions of all force transfer actions. Strength prediction validity was confirmed through comparisons with experimentally obtained strength data from 50 specimens collected from the available literature. Our findings indicate the prediction accuracy as superior to that of a strut-and-tie model and design provisions of the Precast/Prestressed Concrete Institute. For practical purposes, a minimalist version of the equilibrium equation is derived to estimate the ultimate strength of diagonal tension failure based on rational simplifications of the force transfer mechanisms.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The first author gratefully acknowledges the financial support provided by a Grant-in-Aid for Scientific Research from the Japan Society of Promotion of Science (JP21KK0072) and the Obayashi Foundation for conducting research at the Department of Civil and Environmental Engineering of the University of California, Davis, US.
References
Aksoylu, C., Y. O. Özkılıç, and M. H. Arslan. 2023. “Experimental and numerical investigation of shear strength at dapped end beams having different shear span and recess corner length.” Structures 48 (Feb): 79–90. https://doi.org/10.1016/j.istruc.2022.12.076.
Aswin, M., B. S. Mohammed, M. Liew, and Z. I. Syed. 2015. “Shear failure of RC dapped-end beams.” Adv. Mater. Sci. Eng. 2015 (1): 309135. https://doi.org/10.1155/2015/309135.
Botros, A. 2015. “Behavior and design of dapped ends of prestressed concrete thin-stemmed members.” Ph.D. thesis, Dept. of Civil, Construction, and Environmental Engineering, North Carolina State Univ.
Chapman, S. J. 2015. MATLAB programming for engineers. 5th ed. Boston, MA: Cengage Learning.
Cook, W. D. 1987. “Studies of reinforced concrete regions near discontinuities.” Ph.D. thesis, Dept. of Civil Engineering and Applied Mechanics, McGill Univ.
Desnerck, P., J. M. Lees, and C. T. Morley. 2016. “Impact of the reinforcement layout on the load capacity of reinforced concrete half-joints.” Eng. Struct. 127 (Nov): 227–239. https://doi.org/10.1016/j.engstruct.2016.08.061.
Desnerck, P., J. M. Lees, and C. T. Morley. 2018. “Strut-and-tie models for deteriorated reinforced concrete half-joints.” Eng. Struct. 161 (Apr): 41–54. https://doi.org/10.1016/j.engstruct.2018.01.013.
Don, W., B. Suryanto, A. Tambusay, and P. Suprobo. 2022. “Forensic assessments of the influence of reinforcement detailing in reinforced concrete half-joints: A nonlinear finite element study.” Structures 38 (Apr): 689–703. https://doi.org/10.1016/j.istruc.2022.02.029.
fib. 2010. Shear and punching shear in RC and FRC elements, fib Bulletin 57. Lausanne, Switzerland: du Béton, Fédération Internationale.
Hamoudi, A. A., M. K. Phang, and R. A. Bierweiler. 1975. “Diagonal shear in prestressed concrete dapped-beams.” J. Proc. 72 (Jul): 347–350. https://doi.org/10.14359/11140.
Herzinger, R. 2008. “Stud reinforcement in dapped ends of concrete beams.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Calgary.
Hussain, H. N., and Q. M. Shakir. 2019. “Experimental study of the behavior of reinforced concrete beams with composite dapped end under effect of static and repeated loads.” Int. J. Appl. Sci. 2 (1): 43. https://doi.org/10.30560/ijas.v2n1p43.
Kanazawa, T. 2021. “Combined upper–lower bound analysis for shear strength of transversely reinforced concrete beams under axial tension.” Eng. Struct. 246 (Nov): 112970. https://doi.org/10.1016/j.engstruct.2021.112970.
Kanazawa, T., K. Nagai, and K. Matsumoto. 2024. “Equilibrium-based analysis of diagonal tension failure from a re-entrant corner of an RC half-joint.” Structures 59: 105708. https://doi.org/10.1016/j.istruc.2023.105708.
Kani, G. 1964. “The riddle of shear failure and its solution.” ACI J. Proc. 61 (Apr): 441–468. https://doi.org/10.14359/7791.
Lantsoght, E. O., C. van der Veen, J. C. Walraven, and A. D. Boer. 2016. “Case study on aggregate interlock capacity for the shear assessment of cracked reinforced-concrete bridge cross sections.” J. Bridge Eng. 21 (5): 04016004. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000847.
Lee, J. D., and J. B. Mander. 2023. “Verification of truss-arch model unified for RC beams with stirrups using shear database.” Eng. Struct. 287 (Jul): 116180. https://doi.org/10.1016/j.engstruct.2023.116180.
Lu, W.-Y., T.-C. Chen, and I.-J. Lin. 2015. “Shear strength of reinforced concrete dapped-end beams with shear span-to-depth ratios larger than unity.” J. Mar. Sci. Technol. 23 (4): 5. https://doi.org/10.6119/JMST-015-0511-1.
Lu, W.-Y., I.-J. Lin, S.-J. Hwang, and Y.-H. Lin. 2003. “Shear strength of high-strength concrete dapped-end beams.” J. Chin. Inst. Eng. 26 (5): 671–680. https://doi.org/10.1080/02533839.2003.9670820.
Lu, W.-Y., I.-J. Lin, and H.-W. Yu. 2012. “Behaviour of reinforced concrete dapped-end beams.” Mag. Concr. Res. 64 (9): 793–805. https://doi.org/10.1680/macr.11.00116.
Marti, P. 1985. “Basic tools of reinforced concrete beam design.” J. Proc. 82 (1): 46–56. https://doi.org/10.14359/10314.
Mattock, A. H. 2012. “Strut-and-tie models of dapped-end beams.” Concr. Int. 34 (2): 35.
Mattock, A. H., and T. C. Chan. 1979. “Design and behavior of dapped-end beams.” PCI J. 24 (6): 28–45. https://doi.org/10.15554/pcij.11011979.28.45.
Mitchell, D., W. D. Cook, and T. Peng. 2010. “Importance of reinforcement detailing.” Spec. Publ. 273 (Sep): 1–16. https://doi.org/10.14359/51682302.
Mitchell, D., J. Marchand, P. Croteau, and W. D. Cook. 2011. “Concorde overpass collapse: Structural aspects.” J. Perform. Constr. Facil. 25 (6): 545–553. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000183.
Moreno-Martínez, J. Y., and R. Meli. 2014. “Experimental study on the structural behavior of concrete dapped-end beams.” Eng. Struct. 75 (Sep): 152–163. https://doi.org/10.1016/j.engstruct.2014.05.051.
Muttoni, A., and M. Fernández Ruiz. 2008. “Shear strength of members without transverse reinforcement as function of critical shear crack width.” ACI Struct. J. 105 (2): 163–172. https://doi.org/10.14359/19731.
Nielsen, M. P., and L. C. Hoang. 2016. Limit analysis and concrete plasticity. 3rd ed. Boca Raton, FL: CRC Press.
PCI. 2004. PCI design handbook. 6th ed. Chicago: Precast/Prestressed Concrete Institute.
PCI. 2018. PCI design handbook. 8th ed. Chicago: Precast/Prestressed Concrete Institute.
Reynolds, G. 1969. The strength of half-joints in reinforced concrete beams. London: Cement and Concrete Association.
Schlaich, J., and K. Schafer. 1991. “Design and detailing of structural concrete using strut-and-tie models.” Struct. Eng. 69 (6): 113–125. https://doi.org/10.1680/bren.2005.158.3.129.
Smith, D. 2005. “Refurbishment of the old Medway Bridge, UK.” In Vol. 158 of Proc., Institution of Civil Engineers–Bridge Engineering, 129–139. Leeds, UK: Emerald Publishing.
Wang, Q., Z. Guo, and P. C. Hoogenboom. 2005. “Experimental investigation on the shear capacity of RC dapped end beams and design recommendations.” Struct. Eng. Mech. 21 (2): 221. https://doi.org/10.12989/sem.2005.21.2.221.
Wight, J. K., and J. G. MacGregor. 2016. Reinforced concrete. London: Pearson.
Yang, K.-H., A. F. Ashour, and J.-K. Lee. 2011. “Shear strength of reinforced concrete dapped-end beams using mechanism analysis.” Mag. Concr. Res. 63 (2): 81–97. https://doi.org/10.1680/macr.9.00006.
Yang, Y., J. Walraven, and J. D. Uijl. 2017. “Shear behavior of reinforced concrete beams without transverse reinforcement based on critical shear displacement.” J. Struct. Eng. 143 (1): 04016146. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001608.
Zamri, N., R. Mohamed, and K. Elliott. 2021. “Shear capacity of precast half-joint beams with steel fibre reinforced self-compacting concrete.” Constr. Build. Mater. 272 (Feb): 121813. https://doi.org/10.1016/j.conbuildmat.2020.121813.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Jul 26, 2023
Accepted: Apr 30, 2024
Published online: Jul 29, 2024
Published in print: Oct 1, 2024
Discussion open until: Dec 29, 2024
ASCE Technical Topics:
- Analysis (by type)
- Beams
- Concrete
- Concrete beams
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Equilibrium
- Failure analysis
- Material mechanics
- Material properties
- Materials engineering
- Model accuracy
- Models (by type)
- Reinforced concrete
- Statics (mechanics)
- Strength of materials
- Structural engineering
- Structural members
- Structural systems
- Tensile strength
- Tension members
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.