Equivalent Lateral Force Design Method for Longitudinal Buckling-Restrained Braces in Bidirectional Ductile Diaphragms
Publication: Journal of Structural Engineering
Volume 150, Issue 3
Abstract
Bridge design specifications include design provisions for ductile diaphragms to resist seismic excitations perpendicular to a bridge’s axis. Buckling restrained braces (BRBs) can conveniently be used for this purpose. Bidirectional ductile diaphragms expand the concept to resist all-direction seismic forces, and nonlinear inelastic response history analyses (NL-RHAs) can be used to show that satisfactory seismic performance objectives can be obtained using this concept. However, a simple design procedure is needed to address the design of the BRBs in the bridge longitudinal direction. As a first step, to fill that need for common multispan simply-supported bridges, a relatively simple-to-use equivalent lateral force (ELF) procedure has been developed on the basis of results from “optimal designs” obtained using NL-RHAs. Findings indicate that the proposed ELF design procedure leads to design that meet the target design objectives.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Data generated during the study are available from the corresponding author by request.
Acknowledgments
This study was sponsored by the Transportation Research Board of the National Academies under the TRB-IDEA Program (NCHRP-215). The Fulbright program, SENESCYT Ecuador, and the University of Buffalo, are acknowledged for their financial support through a scholarship to Dr. Homero Carrion-Cabrera. However, any opinions, findings, conclusions, and recommendations presented are those of the authors and do not necessarily reflect the views of the sponsors.
References
AASHTO. 2011. AASHTO guide specifications for LRFD seismic bridge design. 2nd ed. Washington, DC: AASHTO.
Aiken, I. D., S. A. Mahin, and P. Uriz. 2002. “Large-scale testing of buckling-restrained braced frames.” In Proc., Japan Passive Control Symp. Yokohama, Japan: Tokyo Institute of Technology.
Alfawakhiri, F., and M. Bruneau. 2001. “Local versus global ductility demands in simple bridges.” J. Struct. Eng. 127 (5): 554–560. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:5(554).
ASCE. 2017. Minimum design loads and associated criteria for buildings and other structures. ASCE/SEI 7-16. Reston, VA: ASCE.
Bruneau, M., and H. Carrion-Cabrera. 2020. “Buckling-restrained braces in bi-directional ductile diaphragms of multi-span bridges.” In Proc., The 17th World Conf. on Earthquake Engineering. Tokyo: International Association of Earthquake Engineering.
Bruneau, M., C.-M. Uang, and S. R. Sabelli. 2011. Ductile design of steel structures. New York: McGraw-Hill Education.
Carden, L. P., A. M. Itani, and I. G. Buckle. 2006. “Seismic performance of steel girder bridges with ductile cross frames using buckling-restrained braces.” J. Struct. Eng. 132 (3): 338–345. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:3(338).
Carrion-Cabrera, H., and M. Bruneau. 2022a. Longitudinal-direction design of buckling restrained braces implemented to achieve resilient multi-span bridges. In Proc., Institution of Civil Engineers-Bridge Engineering, 1–28. Leeds, UK: ICE Publishing.
Carrion-Cabrera, H., and M. Bruneau. 2022b. “Seismic response of regular multi-span bridges having buckling-restrained braces in their longitudinal direction.” Eng. Struct. 259 (Mar): 114127. https://doi.org/10.1016/j.engstruct.2022.114127.
Celik, O. C., and M. Bruneau. 2009. “Seismic behavior of bidirectional-resistant ductile end diaphragms with buckling restrained braces in straight steel bridges.” Eng. Struct. 31 (2): 380–393. https://doi.org/10.1016/j.engstruct.2008.08.013.
Cui, J. 2020. BRB performance issues. Christchurch, New Zealand: Univ. of Canterbury.
Fahnestock, L. A., J. M. Ricles, and R. Sause. 2007. “Experimental evaluation of a large-scale buckling-restrained braced frame.” J. Struct. Eng. 133 (9): 1205–1214. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:9(1205).
Guerrero, H., T. Ji, A. Teran-Gilmore, and J. A. Escobar. 2016. “A method for preliminary seismic design and assessment of low-rise structures protected with Buckling-Restrained Braces.” Eng. Struct. 123 (Mar): 141–154. https://doi.org/10.1016/j.engstruct.2016.05.015.
Hoveidae, N., and B. Rafezy. 2012. “Overall buckling behavior of all-steel buckling restrained braces.” J. Constr. Steel Res. 79 (Dec): 151–158. https://doi.org/10.1016/j.jcsr.2012.07.022.
Kanaji, H., N. Hamada, T. Ishibashi, M. Amako, and T. Oryu. 2005. “Design and performance tests of buckling restrained braces for seismic retrofit of a long-span bridge.” In Proc., 21th US–Japan Bridge Engineering Workshop. Tsukuba, Japan: Public Works Research Institute.
Kiggins, S., and C.-M. Uang. 2006. “Reducing residual drift of buckling-restrained braced frames as a dual system.” Eng. Struct. 28 (11): 1525–1532. https://doi.org/10.1016/j.engstruct.2005.10.023.
Lanning, J. 2014. Using buckling-restrained braces on long-span bridges near seismic faults. San Diego: Univ. of California.
Lanning, J., G. Benzoni, and C.-M. Uang. 2016a. “Using buckling-restrained braces on long-span bridges. I: Full-scale testing and design implications.” J. Bridge Eng. 21 (5): 04016001. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000781.
Lanning, J., G. Benzoni, and C.-M. Uang. 2016b. “Using buckling-restrained braces on long-span bridges. II: Feasibility and development of a near-fault loading protocol.” J. Bridge Eng. 21 (5): 04016002. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000804.
Lehman, D. E., and J. P. Moehle. 2000. “Performance-based seismic design of reinforced concrete bridge columns.” In Proc., 12th World Conf. on Earthquake Engineering. Upper Hutt, New Zealand: New Zealand Society for Earthquake Engineering.
Li, C.-H., Z. Vidmar, B. Saxey, M. Reynolds, and C.-M. Uang. 2022. “A procedure for assessing low-cycle fatigue life of buckling-restrained braces.” J. Struct. Eng. 148 (2): 04021259. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003237.
López, W. A., and R. Sabelli. 2004. “Seismic design of buckling-restrained braced frames.” In Steel tips. Pleasant Hill, CA: Structural Steel Educational Council.
MacRae, G., C.-L. Lee, S. Vazquez-Coluga, J. Cui, S. Alizadeh, and L.-J. Jia. 2021. “BRB system stability considering frame out-of-plane loading and deformation zone.” Bull. N.Z. Soc. Earthquake Eng. 54 (1): 31–39. https://doi.org/10.5459/bnzsee.54.1.31-39.
Pantelides, C. P., L. Ibarra, Y. Wang, and A. Upadhyay. 2016. “Seismic rehabilitation of skewed and curved bridges using a new generation of buckling restrained braces.” M. P. Consortium. Accessed November 10, 2020. https://rosap.ntl.bts.gov/view/dot/31880.
Reno, M. L., and M. N. Pohll. 2010. “Incorporating buckling restrained braces (BRB) as part of the Arburn-Foresthill bridge seismic retrofit.” Accessed February 18, 2022. https://www.pwri.go.jp/eng/ujnr/tc/g/pdf/29/29-4-3_Reno.pdf.
Roussis, P. C., M. C. Constantinou, M. Erdik, E. Durukal, and M. Dicleli. 2003. “Assessment of performance of seismic isolation system of Bolu Viaduct.” J. Bridge Eng. 8 (4): 182–190. https://doi.org/10.1061/(ASCE)1084-0702(2003)8:4(182).
Sabelli, R., S. Mahin, and C. Chang. 2003. “Seismic demands on steel braced frame buildings with buckling-restrained braces.” Eng. Struct. 25 (5): 655–666. https://doi.org/10.1016/S0141-0296(02)00175-X.
Saxey, B. 2015. “A comparison of symmetric and non-symmetric loading on performance of buckling restrained braces.” In Proc., Steel Innovation Conf. Auckland, New Zealand: Steel Construction.
Tremblay, R., P. Bolduc, R. Neville, and R. DeVall. 2006. “Seismic testing and performance of buckling-restrained bracing systems.” Can. J. Civ. Eng. 33 (2): 183–198. https://doi.org/10.1139/l05-103.
Tsai, K. C., and P. C. Hsiao. 2008. “Pseudo-dynamic test of a full-scale CFT/BRB frame–Part II: Seismic performance of buckling-restrained braces and connections.” Earthquake Eng. Struct. Dyn. 37 (7): 1099–1115. https://doi.org/10.1002/eqe.803.
Tsai, K. C., P. C. Hsiao, K. J. Wang, Y. T. Weng, M. L. Lin, K. C. Lin, C. H. Chen, J. W. Lai, and S. L. Lin. 2008. “Pseudo-dynamic tests of a full-scale CFT/BRB frame—Part I: Specimen design, experiment and analysis.” Earthquake Eng. Struct. Dyn. 37 (7): 1081–1098. https://doi.org/10.1002/eqe.804.
Uang, C.-M., M. Nakashima, and K.-C. Tsai. 2004. “Research and application of buckling-restrained braced frames.” Int. J. Steel Struct. 4 (4): 301–313.
Wang, Y., L. Ibarra, and C. Pantelides. 2016. “Seismic retrofit of a three-span RC bridge with buckling-restrained braces.” J. Bridge Eng. 21 (11): 04016073. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000937.
Watanabe, A., Y. Hitomi, E. Saeki, A. Wada, and M. Fujimoto. 1988. “Properties of brace encased in buckling-restraining concrete and steel tube.” In Proc., 9th World Conf. on Earthquake Engineering, 719–724. Tokyo: International Association of Earthquake Engineering.
Wei, X., and M. Bruneau. 2016. Buckling restrained braces applications for superstructure and substructure protection in bridges. Amherst, NY: State Univ. of New York at Buffalo.
Wei, X., and M. Bruneau. 2018. “Experimental investigation of buckling restrained braces for bridge bidirectional ductile end diaphragms.” J. Struct. Eng. 144 (6): 04018048. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002042.
Zahrai, S. M., and M. Bruneau. 1999a. “Cyclic testing of ductile end diaphragms for slab-on-girder steel bridges.” J. Struct. Eng. 125 (9): 987–996. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:9(987).
Zahrai, S. M., and M. Bruneau. 1999b. “Ductile end-diaphragms for seismic retrofit of slab-on-girder steel bridges.” J. Struct. Eng. 125 (1): 71–80. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:1(71).
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Jun 1, 2023
Accepted: Nov 1, 2023
Published online: Jan 4, 2024
Published in print: Mar 1, 2024
Discussion open until: Jun 4, 2024
ASCE Technical Topics:
- Bracing
- Bridge design
- Buckling
- Construction engineering
- Construction methods
- Continuum mechanics
- Design (by type)
- Diaphragms (structural)
- Ductility
- Dynamics (solid mechanics)
- Earthquake engineering
- Engineering fundamentals
- Engineering mechanics
- Forces (type)
- Geotechnical engineering
- Lateral forces
- Material mechanics
- Material properties
- Materials engineering
- Mechanical properties
- Seismic design
- Seismic tests
- Solid mechanics
- Structural dynamics
- Structural engineering
- Structural members
- Structural systems
- Tests (by type)
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Homero Carrion-Cabrera, Michel Bruneau, Asynchronous Shake-Table Testing of Seismic Resilient Multispan Bridges Having Buckling Restrained Braces in Bidirectional Ductile Diaphragm, Journal of Structural Engineering, 10.1061/JSENDH.STENG-12845, 150, 7, (2024).