Seismic Performance of Precast Shear Wall Systems and Connection Details for Underground Structures
Publication: Journal of Structural Engineering
Volume 149, Issue 6
Abstract
Connection details are critical for both seismic performance and constructability of underground precast concrete (PC) shear wall systems. Current traditional wall-to-wall shear connection details present considerable constructability issues. To address this issue, application of cast-in-place (CIP) connecting beams (i.e., cap and waling beams) at the top and midheight of a precast shear wall system was studied. Under the capacity design concept specified in current standards, three test specimens were designed and tested under the reversed cyclic loadings. Of the three, two employed CIP connecting beams. The third, which served as the reference specimen, adopted the traditional ductile connection detail of embedded wire loops. In addition, numerical simulations and corresponding reverse analyses were conducted to identify the effect of wall-to-wall shear connection details on seismic performance of the precast shear wall systems. Although excellent seismic performance can be achieved by using traditional shear connection, satisfactory seismic performance may also be achieved with proper integration of only CIP beams.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request.
Acknowledgments
This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (NRF-2021R1A2C1012314). Also, this work was also supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. RS–2023–00209647).
References
ACI (American Concrete Institute). 2013. Guide for testing reinforced concrete structural elements under slowly applied simulated seismic loads. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2019. Building code requirements for structural concrete. ACI 318. Farmington Hills, MI: ACI.
Aldowaish, A., J. Kokuryo, O. Almazyad, and H. C. Goi. 2022. “Environmental, social, and governance integration into the business model: Literature review and research agenda.” Sustainability 14 (5): 2959. https://doi.org/10.3390/su14052959.
ASCE. 2017. Seismic evaluation and retrofit of existing buildings. ASCE/SEI 41. Reston, VA: ASCE.
ASCE. 2022. Minimum design loads and associated criteria for buildings and otherstructures, ASCE 7. Reston, VA: ASCE.
ASTM. 2014. Standard test method for compressive strength of cylindrical concrete specimens. ASTM C39/C39M. West Conshohocken, PA: ASTM.
Dong, Y. H., L. Jaillon, P. Chu, and C. S. Poon. 2015. “Comparing carbon emissions of precast and cast-in-situ construction methods—A case study of high-rise private building.” Constr. Build. Mater. 99 (Jun): 39–53. https://doi.org/10.1016/j.conbuildmat.2015.08.145.
El-Tawil, S., M. K. Christopher, and H. Mohammad. 2002. “Pushover of hybrid coupled walls. I: Design and modeling.” J. Struct. Eng. 128 (10): 1272–1281. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:10(1272).
FEMA. 2016. Recommended seismic provisions: Design examples. FEMA P-1051. Washington, DC: FEMA.
Han, S. J., D. H. Lee, S. T. Yi, and K. S. Kim. 2020. “Experimental shear tests of reinforced concrete beams with corroded longitudinal reinforcement.” Struct. Concr. 21 (5): 1763–1776. https://doi.org/10.1002/suco.201900248.
Jaillon, L., and C. S. Poon. 2008. “Sustainable construction aspects of using prefabrication in dense urban environment: A Hong Kong case study.” Construct. Manage. Econ. 26 (9): 953–966. https://doi.org/10.1080/01446190802259043.
Jaillon, L., and C. S. Poon. 2009. “The evolution of prefabricated residential building systems in Hong Kong: A review of the public and the private sector.” Autom. Constr. 18 (3): 239–248. https://doi.org/10.1016/j.autcon.2008.09.002.
Jiang, J., J. Luo, W. Xue, X. Hu, and D. Qin. 2021. “Seismic performance of precast concrete double skin shear walls with different vertical connection types.” Eng. Struct. 245 (Oct): 112911. https://doi.org/10.1016/j.engstruct.2021.112911.
Kittrell, K. 2012. “Impacts of vacant land values.” Transp. Res. Rec.: J. Transp. Res. Board 2276 (1): 138–145. https://doi.org/10.3141/2276-17.
Korea Construction Standards Center. 2019. Building seismic design: Standard. KDS 41 17 00. Seoul: Architectural Institute of Korea.
Lee, D. H., S. J. Han, H. E. Joo, K. S. Kim, D. Zhang, and J. Kim. 2020. “Shear crack concentration in reinforced concrete beam subjected to combined shear and flexure.” Adv. Struct. Eng. 23 (11): 2305–2317. https://doi.org/10.1177/1369433219895911.
Lee, D. H., S. J. Han, H. Ju, and K. S. Kim. 2021. “Shear strength of prestressed concrete beams considering bond mechanism in reinforcement.” ACI Struct. J. 118 (3): 267–277. https://doi.org/10.14359/51730531.
Lee, D. H., S. J. Han, and K. S. Kim. 2016. “Dual potential capacity model for reinforced concrete beams subjected to shear.” Struct. Concr. 17 (3): 443–456. https://doi.org/10.1002/suco.201500165.
Lee, D. H., S. J. Han, K. S. Kim, and J. M. LaFave. 2017. “Shear capacity of steel fiber-reinforced concrete beams.” Struct. Concr. 18 (2): 278–291. https://doi.org/10.1002/suco.201600104.
Lee, D. H., K. S. Kim, S. J. Han, D. Zhang, and J. Kim. 2018. “Dual potential capacity model for reinforced concrete short and deep beams subjected to shear.” Struct. Concr. 19 (1): 76–85. https://doi.org/10.1002/suco.201700202.
Lei, M., L. Liu, Y. Lin, C. Shi, W. Yang, C. Cao, and Y. Liu. 2019. “Research progress on stability of slurry wall trench of underground diaphragm wall and design method of slurry unit weight.” Adv. Civ. Eng. 2019 (Dec): 1–19. https://doi.org/10.1155/2019/3965374.
Ogwu, I., Z. Long, D. Lee, X. Zhang, W. Zhang, and M. Okonkwo. 2021. “Fundamental issues in the qualification of smart and intelligence in building materials discourse: A systematic review.” Buildings 11 (11): 558. https://doi.org/10.3390/buildings11110558.
PCI (Prestressed Concrete Institute). 2017. Design handbook: Precast and prestressed concrete. 8th ed. Chicago: PCI.
Peng, J., F. L. Peng, N. Yabuki, and T. Fukuda. 2019. “Factors in the development of urban underground space surrounding metro stations: A case study of Osaka, Japan.” Tunnelling Underground Space Technol. 91 (Sep): 103009. https://doi.org/103009.10.1016/j.tust.2019.103009.
Richard, R. B. 2005. “Industrialised building systems: Reproduction before automation and robotics.” Autom. Constr. 14 (4): 442–451. https://doi.org/10.1016/j.autcon.2004.09.009.
Yerzhanov, M., and D. H. Lee. 2020. “Shear design method of Eurasia for concrete members.” ACI Struct. J. 117 (3): 207–222. https://doi.org/10.14359/51723520.
Zhang, W., D. H. Lee, O. Ikechukwu, and M. Okonkwo. 2021. “Nonlinear shear analysis of corroded RC beams considering bond mechanism.” ACI Struct. J. 118 (6): 47–61. https://doi.org/10.14359/51732996.
Zhang, X., S. Li, W. Zhang, O. Ikechukwu, L. Dai, and L. Wang. 2020. “Second remediation of long-term deflection and cracking of PT box-girder bridge using external post-tensioning.” J. Perform. Constr. Facil. 34 (5): 04020090. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001491.
Zhang, X., L. Wang, J. Zhang, and Y. Liu. 2016. “Model for flexural strength calculation of corroded RC beams considering bond–slip behavior.” J. Eng. Mech. 142 (7): 04016038. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001079.
Zhang, X. H., B. W. Liu, W. Zhang, Q. C. Chen, and C. Q. Yang. 2019. “Shear behavior of corroded RC beams considering concrete spalling damage.” In Proc., IABSE 20th Congress Evolving Metropolis, NYC 2019. New York: Curran Associates.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jul 23, 2022
Accepted: Feb 8, 2023
Published online: Apr 13, 2023
Published in print: Jun 1, 2023
Discussion open until: Sep 13, 2023
ASCE Technical Topics:
- Beams
- Concrete
- Connections (structural)
- Earthquake engineering
- Engineering fundamentals
- Engineering materials (by type)
- Geotechnical engineering
- Materials engineering
- Precast concrete
- Seismic effects
- Seismic tests
- Shear walls
- Structural engineering
- Structural members
- Structural systems
- Structures (by type)
- Tests (by type)
- Underground structures
- Walls
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Deuckhang Lee, Su-Min Kang, Safe Seismic Design of Intermediate Precast Shear Wall System, Journal of Structural Engineering, 10.1061/JSENDH.STENG-13322, 150, 9, (2024).