Prediction of the Hydrodynamic Loads on a Full-Scale Caisson at High Reynolds Number
Publication: Journal of Structural Engineering
Volume 149, Issue 6
Abstract
The paper reports on the computation of the hydrodynamic loads on a full-scale caisson at high Reynolds number in the presence of vortex shedding. The objective was to obtain reliable predictions of the resulting mean and fluctuating forces to guide the design of an actual caisson in the absence of relevant experimental data. A further objective was to investigate the effectiveness of alternative methods for the control of vortex shedding that can be implemented in practice. Two such methods were evaluated: (1) by rounding the corners of the rectangular-sectioned caisson, and (2) by the placement of a splitter plate in the separated wake region. The computations, which were performed using the OpenFOAM open-source software, were for a fixed caisson and hence did not account for motions due to vortex-induced vibrations. The effects of turbulence were accounted for by performing large-eddy simulations, and by using two-equation eddy-viscosity closures, one of which was specifically adapted to account for the interactions between the periodic vortex shedding and the random turbulence. The numerical accuracy was checked using the grid convergence index method, and the computations were extensively validated against data from relevant benchmark flows. The recommendations of this research were implemented in the design of a full-scale caisson that has since been deployed in a bridge construction project.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The financial support provided by the National Science Foundation of PR China (51208056), the Fundamental Research Funds for the Central Universities CHD (300102212909), and the Natural Science Basic Research Program of Shaanxi Province (2023-JC-YB-292) is gratefully acknowledged.
References
Bai, H. L., and M. M. Alam. 2018. “Dependence of square cylinder wake on Reynolds number.” Phys. Fluids 30 (1): 015102. https://doi.org/10.1063/1.4996945.
Bearman, P. W., and E. D. Obasaju. 1982. “An experimental study of pressure fluctuations on fixed and oscillating square-section cylinders.” J. Fluid Mech. 119 (Jun): 297–321. https://doi.org/10.1017/S0022112082001360.
Bruno, L., D. Fransos, N. Coste, and A. Bosco. 2010. “3D flow around a rectangular cylinder: A computational study.” J. Wind Eng. Ind. Aerodyn. 98 (6–7): 263–276. https://doi.org/10.1016/j.jweia.2009.10.005.
Carassale, L., A. Freda, and M. Marre-Brunenghi. 2014. “Experimental investigation on the aerodynamic behavior of square cylinders with rounded corners.” J. Fluids Struct. 44 (1): 195–204. https://doi.org/10.1016/j.jfluidstructs.2013.10.010.
Celik, I. B., U. Ghia, P. J. Roache, C. J. Freitas, H. Coleman, and P. E. Raad. 2008. “Procedure for estimation and reporting of uncertainty due to discretization in CFD applications.” J. Fluids Eng. 130 (7): 078001. https://doi.org/10.1115/1.2960953.
Dai, S., B. A. Younis, and H. Y. Zhang. 2017. “Prediction of turbulent flow around a square cylinder with rounded corners.” J. Offshore Mech. Arctic Eng. 139 (3): 031804. https://doi.org/10.1115/1.4035957.
Dai, S., B. A. Younis, H. Y. Zhang, and C. Y. Guo. 2018. “Prediction of vortex shedding suppression from circular cylinders at high Reynolds number using base splitter plates.” J. Wind Eng. Ind. Aerodyn. 182 (Nov): 115–127. https://doi.org/10.1016/j.jweia.2018.09.006.
Durao, D. F. G., M. V. Heitor, and J. C. F. Pereira. 1998. “Measurements of turbulent and periodic flows around a square cross-section cylinder.” Exp. Fluids 6 (1): 298–304. https://doi.org/10.1007/BF00538820.
Gerrard, J. H. 1966. “The mechanics of the formation region of vortices behind bluff bodies.” J. Fluid Mech. 25 (2): 401–413. https://doi.org/10.1017/S0022112066001721.
Igarashi, T. 1997. “Drag reduction of a square prism by flow control using a small rod.” J. Wind Eng. Ind. Aerodyn. 69 (Jul): 141–153. https://doi.org/10.1016/S0167-6105(97)00150-5.
Issa, R. I. 1986. “Solution of the implicitly discretised fluid flow equations by operator-splitting.” J. Comp. phys. 62 (1): 40–65. https://doi.org/10.1016/0021-9991(86)90099-9.
Jeong, J., and F. Hussain. 1995. “On the identification of a vortex.” J. Fluid Mech. 285 (1): 69–94. https://doi.org/10.1017/S0022112095000462.
Jones, D. A., M. Chapuis, M. Liefvendahl, D. Norrison, and R. Widjaja. 2016. RANS simulations using OpenFOAM software. Fishermans Bend, VIC, Australia Maritime Platforms Division, DST Group Defense Science and Technology Group.
Krishna, M. S., P. Chakrabarti, S. K. Chakrabarti, A. Mukkamala, and N. Anavekar. 2004. “Overview of Tacoma narrowsbridge floating caisson design.” Vol. 1 of Proc., 23rd Int. conf. Offshore Mechanics and Arctic Engineering, Vancouver, Canada, 465–478. New York: ASME.
Lee, B. E. 1975. “The effect of turbulence on the surface pressure field of a square prism.” J. Fluid Mech. 69 (2): 263–282. https://doi.org/10.1017/S0022112075001437.
Luo, S. C., M. G. Yazdani, Y. T. Chew, and T. S. Lee. 1994. “Effects of incidence and afterbody shape on flow past bluff cylinders.” J. Wind Eng. Ind. Aerodyn. 53 (3): 375–399. https://doi.org/10.1016/0167-6105(94)90092-2.
Lyn, D. A. 1992. Ensemble-averaged measurements in the turbulent near wake of a square cylinder: A guide to the data. Rep. No. CE-HSE-92-6. West Lafayette, IN: School of Civil Engineering, Purdue Univ.
Lyn, D. A., S. Einav, W. Rodi, and J. H. Park. 1995. “A laser-Doppler velocimetry study of ensemble-averaged characteristics of the turbulent near wake of a square cylinder.” J. Fluid Mech. 304 (10): 285–319. https://doi.org/10.1017/S0022112095004435.
Miran, S., and C. H. Sohn. 2015. “Numerical study of the rounded corners effect on flow past a square cylinder.” Int. J. Numer. Methods Heat Fluid Flow 25 (4): 686–702. https://doi.org/10.1108/HFF-12-2013-0339.
Nakaguchi, H., K. Hashimoto, and S. Muto. 1968. “An experimental study on aerodynamic drag of rectangular cylinders.” J. Jpn. Soc. Aeronaut. Space Sci. 16 (168): 1–5. https://doi.org/10.2322/jjsass1953.16.1.
Norberg, C. 1993. “Flow around rectangular cylinders: Pressure forces and wake frequencies.” J. Wind Eng. Ind. Aerodyn. 49 (1–3): 187–196. https://doi.org/10.1016/0167-6105(93)90014-F.
Rathakrishnan, E. 1999. “Effect of splitter plate on bluff body drag.” AIAA J. 37 (9): 1125–1126. https://doi.org/10.2514/2.823.
Saha, A. K., K. Muralidhar, and G. Biswas. 2000. “Experimental study of flow past a square cylinder at high Reynolds numbers.” Exp. Fluids 29 (6): 553–563. https://doi.org/10.1007/s003480000123.
Sarioglu, M. 2017. “Control of flow around a square cylinder at incidence by using a splitter plate.” Flow Meas. Instrum. 53 (B): 221–229. https://doi.org/10.1016/j.flowmeasinst.2016.06.024.
Sarioglu, M., Y. E. Akansu, and T. Yavuz. 2005. “Control of flow around square cylinders at incidence by using a rod.” AIAA J. 43 (7): 1419–1426. https://doi.org/10.2514/1.9460.
Schlichting, H., and K. Gersten. 2017. Boundary-layer theory. 9th ed. Berlin: Springer-Verlag.
Shimada, K., and T. Ishihara. 2002. “Application of a modified model to the prediction of aerodynamic characteristics of rectangular cross-section cylinders.” J. Fluids Struct. 16 (4): 465–485. https://doi.org/10.1006/jfls.2001.0433.
Smagorinsky, J. 1963. “General circulation experiments with the primitive equations. I: The basic experiment.” Mon. Weather Rev. 91 (3): 99–164. https://doi.org/10.1175/1520-0493(1963)091%3C0099:GCEWTP%3E2.3.CO;2.
Sohankar. 2006. “Flow over a bluff body from moderate to high Reynolds numbers using large eddy simulation.” Comput. Fluids 35 (10): 1154–1168. https://doi.org/10.1016/j.compfluid.2005.05.007.
Tamura, T., and T. Miyagi. 1999. “The effect of turbulence on aerodynamic forces on a square cylinder with various corner shapes.” J. Wind Eng. Ind. Aerodyn. 83 (1–3): 135–145. https://doi.org/10.1016/S0167-6105(99)00067-7.
Tamura, T., T. Miyagi, and T. Kitagishi. 1998. “Numerical prediction of unsteady pressures on a square cylinder with various corner shapes.” J. Wind Eng. Ind. Aerodyn. 74 (Apr): 531–542. https://doi.org/10.1016/S0167-6105(98)00048-8.
Vickery, B. J. 1966. “Fluctuating lift and drag on a long cylinder of square cross-section in a turbulent stream.” J. Fluid Mech. 25 (3): 481–494. https://doi.org/10.1017/S002211206600020X.
Wang, X., and M. Gu. 2015. “Experimental investigation of Reynolds number effects on 2D rectangular prisms with various side ratios and rounded corners.” Wind Struct. 21 (2): 183–202. https://doi.org/10.12989/was.2015.21.2.183.
Wang, X., and M. Gu. 2016. “Experimental study on wind pressure distributions of 2-D square prisms with various corner treatments.” China Civ. Eng. J. 49 (7): 79–88. https://doi.org/10.15951/j.tmgcxb.2016.07.007.
Yakhot, V., and S. A. Orszag. 1986. “Renormalization group analysis of turbulence. I. Basic theory.” J. Sci. Comp. 1 (1): 3–51. https://doi.org/10.1007/BF01061452.
Yakhot, V., S. A. Orszag, S. Thangam, T. B. Gatski, and C. G. Speziale. 1992. “Development of turbulence models for shear flows by a double expansion technique.” Phys. Fluids A 4 (7): 1510–1520. https://doi.org/10.1063/1.858424.
Yang, H., S. Hou, W. Yang, S. Li, H. Hou, and Q. Li. 2022. “Experimental investigation of current forces on a square caisson with small aspectratios during the sinking process.” J. Hydraul. Res. 60 (6): 959–969. https://doi.org/10.1080/00221686.2022.2106588.
Yang, H., W. Yang, Q. Li, and J. Kou. 2019. “Experimental investigation of current forces on floating cylinder during the sinking process.” Ocean Eng. 178 (Apr): 134–144. https://doi.org/10.1016/j.oceaneng.2019.02.060.
Younis, B. A., and V. Przulj. 2006. “Computation of turbulent vortex shedding.” Comput. Mech. 37 (5): 408–425. https://doi.org/10.1007/s00466-005-0713-2.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jul 11, 2022
Accepted: Jan 30, 2023
Published online: Apr 12, 2023
Published in print: Jun 1, 2023
Discussion open until: Sep 12, 2023
ASCE Technical Topics:
- Caissons
- Coastal engineering
- Coastal processes
- Coasts, oceans, ports, and waterways engineering
- Computing in civil engineering
- Design (by type)
- Eddy (fluid dynamics)
- Engineering fundamentals
- Fluid dynamics
- Fluid mechanics
- Foundations
- Geotechnical engineering
- Hydrodynamics
- Hydrologic engineering
- Load factors
- Ocean currents
- Reynolds number
- Structural design
- Turbulence
- Vortex shedding
- Vortices
- Water and water resources
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.