Seismic Behavior of Double Activation Self-Centering Brace and Braced Structures
Publication: Journal of Structural Engineering
Volume 149, Issue 7
Abstract
The self-centering technical approach is used widely to improve building resiliency. This paper presents a double activation self-centering brace (DA-SCB) with two groups of disc springs activated successively. Compared with current self-centering braces (SCBs), the DA-SCB is first activated under small displacement excitation to dissipate energy, and reactivated under large displacement excitation, leading to a higher bearing capacity. Cyclic loading tests were conducted on the SCB and the DA-SCB in order to comparatively study their energy dissipation and the self-centering behaviors and to validate the hysteretic performance of the DA-SCB. Moreover, the double flag–shaped model was developed to predict the hysteretic behavior of the DA-SCB. Fifteen-story steel frame models with SCBs (SCBF) and DA-SCBs (DA-SCBF) were analyzed to study the influence of the reactivation behavior on the seismic resilience of these structures. The test results showed that the bearing capacity and the energy dissipation ability of the DA-SCB were highly consistent with those of the SCB within the same design parameters. Comparisons of the prediction and test results indicated that the proposed model can accurately replicate hysteretic responses of the DA-SCB and the SCB. The DA-SCBF and SCBF have equivalent self-centering behavior. However, the seismic performance of the DA-SCBF is higher than that of the SCBF, and the economic loss of the DA-SCBF after earthquakes decreased by 8.08% compared with the SCBF. Moreover, compared with the SCB, the DA-SCB uses fewer disc springs and can attenuate the weak story effect. To sum up, the seismic resilience level of the DA-SCBF first increases and then decreases with an increased gap length.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors gratefully acknowledge the partial support of this research by the Fundamental Research Funds for the Central Universities under Grant No. 2022YJS081, and the National Natural Science Foundation of China under Grant Nos. 52125804, and 52078036.
References
AISC. 2005. Seismic provisions for structural steel buildings. AISC 341-05. Chicago: AISC.
Askariani, S.-S., S. Garivani, I. Hajirasouliha, and N. Soleimanian. 2022. “Innovative self-centering systems using shape memory alloy bolts and energy dissipating devices.” J. Constr. Steel Res. 190 (Mar): 107127. https://doi.org/10.1016/j.jcsr.2021.107127.
China Standards Press. 2005. Disc spring. GB/T1972-2005. Beijing: China Standards Press.
Christopoulos, C., S. Pampanin, and M. J. Nigel Priestley. 2003. “Performance-based seismic response of frame structures including residual deformations Part I: Single-degree of freedom systems.” J. Earthquake Eng. 7 (1): 97–118. https://doi.org/10.1080/13632460309350443.
Christopoulos, C., R. Tremblay, H.-J. Kim, and M. Lacerte. 2008. “Self-centering energy dissipative bracing system for the seismic resistance of structures: Development and validation.” J. Struct. Eng. 134 (1): 96–107. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(96).
Curti, G., and R. Montanini. 1999. “On the influence of friction in the calculation of conical disk springs.” J. Appl. Mech. 121 (4): 622–627. https://doi.org/10.1115/1.2829508.
Fahnestock, L. A., J. M. Ricles, and R. Sause. 2007. “Experimental evaluation of a large-scale buckling-restrained braced frame.” J. Struct. Eng. 133 (9): 1205–1214. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:9(1205).
Fan, X.-W., L.-H. Xu, and Z.-X. Li. 2019. “Seismic performance evaluation of steel frames with pre-pressed spring self-centering braces.” J. Constr. Steel Res. 162 (Nov): 105761. https://doi.org/10.1016/j.jcsr.2019.105761.
Fang, C., Y.-W. Ping, Y.-Y. Chen, M. C. H. Yam, J.-B. Chen, and W. Wang. 2022a. “Seismic performance of self-centering steel frames with SMA-viscoelastic hybrid braces.” J. Earthquake Eng. 26 (10): 5004–5031. https://doi.org/10.1080/13632469.2020.1856233.
Fang, C., W. Wang, C.-X. Qiu, S.-L. Hu, G.-A. MacRae, and M. R. Eatherton. 2022b. “Seismic resilient steel structures: A review of research, practice, challenges and opportunities.” J. Constr. Steel Res. 191 (Apr): 107172. https://doi.org/10.1016/j.jcsr.2022.107172.
FEMA. 2012a. Seismic performance assessment of buildings volume 1—Methodology. FEMA P-58-1. Washington, DC: FEMA.
FEMA. 2012b. Seismic performance assessment of buildings, volume 3—Supporting electronic materials and background documentation. FEMA P-58-3. Washington, DC: FEMA.
Hu, S.-L., W. Wang, and M. Shahria Alam. 2021. “Comparative study on seismic fragility assessment of self-centering energy-absorbing dual rocking core versus buckling restrained braced systems under mainshock-aftershock sequences.” J. Struct. Eng. 147 (9): 04021124. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003082.
Huang, L.-J., Z. Zhou, Y. Wei, Q. Xie, and X.-Y. Sun. 2022. “Seismic performance and resilience assessment of friction damped self-centering prestressed concrete frames.” Eng. Struct. 263 (Jul): 114346. https://doi.org/10.1016/j.engstruct.2022.114346.
ICBO (International Conference of Building Officials). 1997. Uniform building code. UBC 97. Whittier, AK: ICBO.
Ji, X.-D., Y.-H. Cheng, and C.-M. Hutt. 2020. “Seismic response of a tuned viscous mass damper (TVMD) coupled wall system.” Eng. Struct. 225 (Dec): 111252. https://doi.org/10.1016/j.engstruct.2020.111252.
Kitayama, S., and M.-C. Constantinou. 2016. “Probabilistic collapse resistance and residual drift assessment of buildings with fluidic self-centering systems.” Earthquake Eng. Struct. Dyn. 45 (12): 1935–1953. https://doi.org/10.1002/eqe.2733.
Li, J., and L.-H. Xu. 2023. “Seismic responses and damage control of long-span continuous rigid-frame bridges considering the longitudinal pounding effect under strong ground motions.” J. Bridge Eng. 28 (2): 04022140. https://doi.org/10.1061/JBENF2.BEENG-5871.
Lin, Z.-C., L.-H. Xu, and X.-S. Xie. 2022. “Self-centering hybrid moment braced frame: Stiffness control and the self-centering acceleration adverse effect.” Eng. Struct. 264 (Aug): 114368. https://doi.org/10.1016/j.engstruct.2022.114368.
Mabon, L. 2019. “Enhancing post-disaster resilience by ‘building back greener’: Evaluating the contribution of nature-based solutions to recovery planning in Futaba County, Fukushima Prefecture, Japan.” Landscape Urban Plann. 187 (Jul): 105–118. https://doi.org/10.1016/j.landurbplan.2019.03.013.
Ozaki, F., Y. Kawai, R. Kanno, and K. Hanya. 2013. “Damage-control systems using replaceable energy-dissipating steel fuses for cold-formed steel structures: Seismic behavior by shake table tests.” J. Struct. Eng. 139 (5): 787–795. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000638.
Ozaki, S., K. Tsuda, and J. Tominaga. 2012. “Analyses of static and dynamic behavior of coned disk springs: Effects of friction boundaries.” Thin-Walled Struct. 59 (Oct): 132–143. https://doi.org/10.1016/j.tws.2012.06.001.
PEER (Pacific Earthquake Engineering Research Center). 2014. “PEER ground motion database NGA-West2.” Accessed June 19, 2020. https://peer.berkeley.edu/ngawest2.
Richards, P.-W., and S.-S. Oh. 2019. “Cyclic behavior of replaceable shear fuse connections for steel moment frames.” J. Struct. Eng. 145 (12): 04019156. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002412.
Shi, Q.-X., F. Wang, P. Wang, and K. Chen. 2018. “Experimental and numerical study of the seismic performance of an all-steel assembled Q195 low-yield buckling-restrained brace.” Eng. Struct. 176 (Dec): 481–499. https://doi.org/10.1016/j.engstruct.2018.09.039.
Tremblay, R., M. Lacerte, and C. Christopoulos. 2008. “Seismic response of multistory buildings with self-centering energy dissipative steel braces.” J. Struct. Eng. 134 (1): 108–120. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(108).
Vafaei, D., and R. Eskandari. 2015. “Seismic response of mega buckling-restrained braces subjected to fling-step and forward-directivity near-fault ground motions.” Struct. Des. Tall Special Build. 24 (9): 672–686. https://doi.org/10.1002/tal.1205.
Wang, M., K.-P. Dong, and M.-Y. Liu. 2020. “Damage control mechanism and seismic performance of a steel moment connection with replaceable low-yield-point steel double T-stub fuses.” Thin-Walled Struct. 157 (Dec): 107143. https://doi.org/10.1016/j.tws.2020.107143.
Wang, W., C. Fang, Y.-S. Zhao, R. Sause, S.-L. Hu, and J. Ricles. 2019. “Self-centering friction spring dampers for seismic resilience.” Earthquake Eng. Struct. Dyn. 48 (9): 1045–1065. https://doi.org/10.1002/eqe.3174.
Xiao, Y., M.-O. Eberhard, Y. Zhou, J.-F. Stanton, and J.-H. Shen. 2022. “Experimental investigation of a low-prestressed self-centering energy dissipative brace.” Earthquake Eng. Struct. Dyn. 51 (6): 1457–1476. https://doi.org/10.1002/eqe.3623.
Xie, Q., Z. Zhou, J.-H. Huang, and S.-P. Meng. 2016. “Influence of tube length tolerance on seismic responses of multi-storey buildings with dual-tube self-centering buckling-restrained braces.” Eng. Struct. 116 (Jun): 26–39. https://doi.org/10.1016/j.engstruct.2016.02.023.
Xu, L.-H., X.-W. Fan, and Z.-X. Li. 2017a. “Cyclic behavior and failure mechanism of self-centering energy dissipation braces with pre-pressed combination disc springs.” Earthquake Eng. Struct. Dyn. 46 (7): 1065–1080. https://doi.org/10.1002/eqe.2844.
Xu, L.-H., X.-W. Fan, and Z.-X. Li. 2017b. “Experimental behavior and analysis of self-centering steel brace with pre-pressed disc springs.” J. Constr. Steel Res. 139 (Dec): 363–373. https://doi.org/10.1016/j.jcsr.2017.09.021.
Xu, L.-H., Z.-C. Lin, and X.-S. Xie. 2022. “Assembled self-centering energy dissipation braces and a force method-based model.” J. Constr. Steel Res. 190 (Mar): 107121. https://doi.org/10.1016/j.jcsr.2021.107121.
Xu, L.-H., X.-S. Xie, and Z.-X. Li. 2021. “Seismic behavior and design approach of variable-damping self-centering braced frame.” J. Struct. Eng. 147 (6): 05021001. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003031.
Zhang, G., L.-H. Xu, and Z.-X. Li. 2020. “Development and seismic retrofit of an innovative modular steel structure connection using symmetrical self-centering haunch braces.” Eng. Struct. 229 (Feb): 111671. https://doi.org/10.1016/j.engstruct.2020.111671.
Zhang, G., L.-H. Xu, and Z.-X. Li. 2022a. “Experimental evaluation on seismic performance of a novel plug-in modular steel structure connection system.” Eng. Struct. 273 (Dec): 115099. https://doi.org/10.1016/j.engstruct.2022.115099.
Zhang, H.-M., L.-M. Quan, and X.-L. Lu. 2022b. “Experimental hysteretic behavior and application of an assembled self-centering buckling-restrained brace.” J. Struct. Eng. 148 (3): 04021302. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003287.
Zhang, Y., and L.-H. Xu. 2022. “Cyclic response of a self-centering RC wall with tension-compression-coupled disc spring devices.” Eng. Struct. 250 (Jan): 113404. https://doi.org/10.1016/j.engstruct.2021.113404.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jun 29, 2022
Accepted: Feb 27, 2023
Published online: Apr 26, 2023
Published in print: Jul 1, 2023
Discussion open until: Sep 26, 2023
ASCE Technical Topics:
- Bracing
- Comparative studies
- Construction engineering
- Construction methods
- Continuum mechanics
- Displacement (mechanics)
- Dynamics (solid mechanics)
- Earthquake engineering
- Energy dissipation
- Engineering fundamentals
- Engineering mechanics
- Excitation (physics)
- Geotechnical engineering
- Methodology (by type)
- Motion (dynamics)
- Research methods (by type)
- Seismic effects
- Seismic tests
- Solid mechanics
- Structural behavior
- Structural engineering
- Structural mechanics
- Tests (by type)
- Thermodynamics
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Yi Xiao, Wenbo Tian, Ying Zhou, Experiment Investigation of Viscoelastic Low-Prestressed Self-Centering Braces, Journal of Structural Engineering, 10.1061/JSENDH.STENG-13616, 150, 8, (2024).
- Longhe Xu, Peng Chen, Xingsi Xie, Hao Jiang, Design-Level Seismic Estimation of Self-Centering Energy Dissipation–Braced Frame Structures with Partial Recentering Capacity, Journal of Structural Engineering, 10.1061/JSENDH.STENG-13414, 150, 8, (2024).
- Longhe Xu, Hao Jiang, Xingsi Xie, Peng Chen, Seismic Analysis of a Self-Centering Braced Frame in Pseudodynamic Tests: Response Characteristics, Brace Contribution, and Damage Evolution, Journal of Structural Engineering, 10.1061/JSENDH.STENG-13217, 150, 8, (2024).
- Tong Guo, Jishuai Wang, Xinqiang Ji, Lianglong Song, Yong Sun, Yunwen Zhang, Seismic Resilience Enhancement of Irregular Space Structure Using Friction-Damped Self-Centering Tension Braces, Journal of Structural Engineering, 10.1061/JSENDH.STENG-13024, 150, 3, (2024).
- Arash Rayegani, Omid Karimzade Soureshjani, Seyed Ali Moayed Alaee, Imad H. Mualla, Fariba Nemati, Seismic Performance of Buildings Equipped with Four-Joint Rotational Friction Dampers in Mainshock–Aftershock Sequences, Journal of Structural Engineering, 10.1061/JSENDH.STENG-12980, 150, 3, (2024).