Modeling of Composite Structures in Fire Using a Coupled Skeletal Frame and Floor System Analysis: Slab Panel Method
Publication: Journal of Structural Engineering
Volume 149, Issue 2
Abstract
This paper presents a proposed design methodology which combines the fire beam element (FBE) for skeletal frame analysis with the slab panel method (SPM) for floor experiencing catenary action. The methodology enables the two systems to interact with each other to provide a simplistic manner to design a full composite structure. The design methodology consists of an iterative process in which (1) the SPM is used to design the composite slab and provides the loads on the support beams of the skeletal structure, and then (2) the FBE analysis, implemented in OpenSees version 2.5.0, determines the deflection of the edge support beams which are used to update the SPM calculations. The existing two-dimensional (2D) FBE finite-element matrices are updated for a three-dimensional FBE, while the SPM is modified to allowing the interaction between the FBE analysis and the SPM. Three validation studies of the FBE analysis show that the FBE analysis is able to capture the behavior of the skeletal structure adequately, as long as the support edge beams of the slab panel have sufficient strength to support the slab panel. The application of the design methodology to an office building serves as a proof on concept and demonstrates that the deflection of the edge beams does have a significant impact on the predicted ultimate load-carrying capacity of the slab panel.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Data for this paper is available from (1) the thesis upon which this paper is based available at https://hdl.handle.net/10019.1/109967, and (2) the online repository at https://doi.org/10.25413/sun.13295720. This includes input files, models, additional detail, and the OpenSees routines used to conduct analyses.
Acknowledgments
The authors would like to thank Associate Professor Charles Clifton for the technical support and input provided. This work was supported by the Institute for Structural Engineering at Stellenbosch University.
References
Ali, F., A. Nadjai, and A. Abu-tair. 2008. “Experimental and numerical study on performance of concrete slabs subjected to severe fire.” In Proc., IAFSS 9th Int. Symp., 1255–1266. Amsterdam, Netherlands: Elsevier.
Bailey, C. G., and D. B. Moore. 2000. “The structural behaviour of steel frames with composite floorslabs subject to fire: Part 2: Design.” Struct. Eng. 78 (Sep): 28–33.
Bailey, C. G., W. S. Toh, and B. M. Chan. 2008. “Simplified and advanced analysis of membrane action of concrete slabs.” ACI Struct. J. 105 (1): 30–40.
Bisby, L., J. Gales, and C. Maluk. 2013. “A contemporary review of large-scale non-standard structural fire testing.” Fire Sci. Rev. 2 (1): 1–27. https://doi.org/10.1186/2193-0414-2-1.
British Steel plc. 1999. The behaviour of multi-storey steel framed buildings in fire: A European joint research programme. Moorgate, UK: Swinden Technology Centre.
BSI (British Standards Institute). 2000. Structural use of steelwork in building—Part 1: Code of practice for design—Rolled and welded sections. London: BSI.
BSI (British Standards Institute). 2005. Eurocode 4: Design of composite steel and concrete structures—Part 1-2: General—Structural Fire Design. London: BSI.
Burgess, I. W., R. J. Plank, M. Green, P. Shepherd, and Z. Huang. 2015. Vulcan. Galway, Ireland: Vulcan Solutions.
Cai, Y., J. K. Paik, and S. N. Atluri. 2009. “Large deformation analyses of space-frame structures, with members of arbitrary cross-section, using explicit tangent stiffness matrices, based on a von karman type nonlinear theory in rotated reference frames.” Comput. Model. Eng. Sci. 53 (2): 117–145.
Cajot, L.-G. 2012. “Fire resistance assessment of composite structures.” Accessed November 28, 2012. https://eurocodes.jrc.ec.europa.eu/showpage.php?id=2012_11_WS_Fire.
Choe, L., S. Ramesh, X. Dai, M. Hoehler, M. Bundy, R. Bryant, B. Story, A. Chakalis, and A. Chernovsky. 2021. Fire resilience of a steel-concrete composite floor system: Full-scale experimental evaluation for U.S. prescriptive approach with a 2-Hour fire-resistance rating (Test #1). Gaithersburg, MD: National Institute of Standards & Technology.
Clifton, G., F. Meng, K. Andisheh, and R. Kordani. 2022. The slab panel method: Design of composite floor systems for severe fires. Manukau City, New Zealand: New Zealand Heavy Engineering Research Association.
Clifton, G. C. 2006. Design of composite steel floor systems for severe fires. Manukau City, New Zealand: New Zealand Heavy Engineering Research Association.
Clifton, G. C., and A. Abu. 2014. Modifications to the application of the SPM:2006 Edition and application to C/VM2. Canterbury, UK: Univ. of Canterbury.
COST. 2014. Benchmark studies Experimental validation of numerical models in fire engineering. New York: Cech Technical Univ.
Fischer, E. C., A. H. Varma, and A. Agarwal. 2019. “Performance-based structural fire engineering of steel building structures: Design-basis compartment fires.” J. Struct. Eng. 145 (9): 04019090. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002370.
Foster, S., M. Chladná, C. Hsieh, I. Burgess, and R. Plank. 2007. “Thermal and structural behaviour of a full-scale composite building subject to a severe compartment fire.” Fire Saf. J. 42 (3): 183–199. https://doi.org/10.1016/j.firesaf.2006.07.002.
Gillie, M. 2000. The behaviour of steel-framed composite structures in fire conditions. Edinburgh, Scotland: Univ. of Edinburgh.
Gillie, M., A. S. Usmani, and J. M. Rotter. 2001. “A structural analysis of the Cardington British steel corner test.” J. Constr. Steel Res. 58 (4): 427–442. https://doi.org/10.1016/S0143-974X(01)00066-9.
Huang, Z., I. W. Burgess, and R. J. Plank. 2003. “Modeling membrane action of concrete slabs in composite buildings in fire. II: Validations.” J. Struct. Eng. 129 (8): 1103–1112. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:8(1103).
Jiang, J., L. Jiang, P. Kotsovinos, J. Zhang, and A. Usmani. 2015. “OpenSees software architecture for the analysis of structures in fire.” J. Comput. Civ. Eng. 29 (1): 04014030. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000305.
LaMalva, K., and D. Hopkin. 2021. “International handbook of structural fire engineering.” In The society of fire protection engineers series. Berlin: Springer.
Law, A. 2016. “The role of modelling in structural fire engineering design.” Fire Saf. J. 80 (11): 89–94. https://doi.org/10.1016/j.firesaf.2015.11.013.
Mago, N. 2004. Influence of slab panel edge sagging in fire—Stage 2 of the SPM: Concise summary. Manukau City, Auckland: New Zealand Heavy Engineering Research Association.
Mensinger, M., P. Schaumann, M. Stadler, and J. Sothmann. 2012. Nutzung der Membran-wirkung von Verbundtrager-Decken-Systemen im Brandfall. Hannover, Germany: Leibniz Univ. Hanover.
Nan, Z., X. Dai, H. Chen, S. Welch, and A. Usmani. 2020. “A numerical investigation of 3D structural behavior for steel-composite structures under various travelling fire scenarios.” Eng. Struct. 267 (Sep): 114587. https://doi.org/10.14264/a1068ab.
SABS (South African Bureau of Standards). 2011. SANS 10162-1 :2011 The structural use of steel Part 1: Limit-states design of hot-rolled steelwork. Pretoria, South Africa: SABS.
Sanad, A. M. 2000. British steel fire test 3: Reference ABAQUS model using grillage representation for slab research report. Edinburgh, Scotland: ABAQUS.
Stadler, M. 2012. Design of composite slab systems in case of fire using simplified finite element analyses. Munich, Germany: Technischen Universität München.
Strauss, L. 2021. Modelling of 3D structures in fire as skeletal frames using the fire beam element (FBE) for simplified analysis and design. Stellenbosch, South Africa: Stellenbosch Univ.
Strauss, L., and R. S. Walls. 2022. “Analysis of structures in fire using the fire beam element—Data repository.” M.Eng. thesis, Dept. of Civil Engineering, Stellenbosch Univ. https://doi.org/10.25413/sun.13295720.
Volkmann, J. F., R. S. Walls, and N. de Koker. 2020. “Implementation of the fire beam element method into OpenSees for the analysis of structures in fire.” Adv. Struct. Eng. 23 (15): 3239–3250. https://doi.org/10.1177/1369433220933451.
Walls, R., C. Viljoen, and H. de Clercq. 2019a. “A nonlinear, beam finite element with variable, eccentric neutral axis.” Eng. Struct. 187 (May): 341–351. https://doi.org/10.1016/j.engstruct.2019.02.056.
Walls, R., C. Viljoen, and H. De Clercq. 2019b. “Parametric investigation into the cross-sectional stress-strain behaviour, stiffness and thermal forces of steel, concrete and composite beams exposed to fire.” J. Struct. Fire Eng. 11 (1): 100–117. https://doi.org/10.1108/JSFE-10-2018-0031.
Walls, R. S. 2016. “A beam finite element for the analysis of structures in fire.” Ph.D. dissertation, Dept. of Civil Engineering, Stellenbosch Univ.
Walls, R. S., C. Viljoen, and H. de Clercq. 2018. “Analysis of structures in fire as simplified skeletal frames using a customised beam finite element.” Fire Technol. 54 (6): 1655–1682. https://doi.org/10.1007/s10694-018-0762-7.
Walls, R. S., C. Viljoen, H. de Clercq, and G. C. Clifton. 2017. “Reliability analysis of the slab panel method (SPM) for the design of composite steel floors in severe fires.” J. Struct. Fire Eng. 8 (1): 84–103. https://doi.org/10.1108/JSFE-01-2017-0008.
Yang, Y., and W. McGuire. 1986. “Stiffness matrix for geometric nonlinear analysis.” J. Struct. Eng. 112 (4): 853–877. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:4(853).
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 149 • Issue 2 • February 2023
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jun 28, 2022
Accepted: Sep 29, 2022
Published online: Nov 24, 2022
Published in print: Feb 1, 2023
Discussion open until: Apr 24, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.