Mechanistic Performance and Distress Model of Bottom Ash Modified Porous Asphalt Concretes with Various Thailand Aggregates
Publication: Journal of Materials in Civil Engineering
Volume 36, Issue 5
Abstract
The porous structure in the porous asphalt concrete (PAC) mixture is achieved by incorporating a substantial amount of coarse aggregate and polymer-modified asphalt binder (PMA). Bottom ash (BA) was used to modify the properties of the conventional asphalt cement for PAC (BA-AC60/70-PAC) with various types of aggregates in Thailand such as basalt (B), granite (G), and limestone (L). With the lipophilic reaction between BA molecular and asphalt cement, the BA replacement results in the higher optimum asphalt cement, which contributes to the improvement of asphalt film thickness. Therefore, the BA replacement was found to have the potential to improve draindown, Marshall stability, resistance to particle loss, strength index, indirect tensile strength, indirect tensile resilient modulus, indirect tensile fatigue life, permanent deformation, rutting resistance, and skid resistance of PAC, which are comparable to those of PAC containing PMA (PMA-PAC) for all studied types of aggregates. Based on the analysis of cyclic test results, the distress model of both BA-AC60/70-PAC and PMA-PAC was developed and found to be unique and may also be applicable to other PMA-PAC with similar aggregates. The outcome of this research will promote the usage of BA by-products to develop a green and economical PAC.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the finding of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research was financially supported by the Electricity Generating Authority of Thailand (Contract No. 63-N001000-11-IO.SS03N3008558). The authors also appreciate the support from Suranaree University of Technology and the National Science and Technology Development Agency under the Chair Professor Program (P-19-52303). The third and sixth authors gratefully acknowledge the financial support from the Australian Research Council (Project No. LP200301154). The seventh author would like to thank Universiti Teknologi Malaysia for the Prominent Visiting Professor Scheme and the UTM High Impact Research Grant (Q.J130000.2451.09G23).
References
Abo-Qudais, S., and H. Al-Shweily. 2017. “Effect of aggregate properties on asphalt mixtures stripping and creep behavior.” Constr. Build. Mater. 21 (9): 1886–1898. https://doi.org/10.1016/j.conbuildmat.2005.07.014.
Alvarez, A. E., A. E. Martin, and C. Estakhri. 2011. “A review of mix design and evaluation research for permeable friction course mixtures.” Constr. Build. Mater. 25 (3): 1159–1166. https://doi.org/10.1016/j.conbuildmat.2010.09.038.
Andres-Valeri, V. C., J. Rodriguez-Torres, M. A. Calzada-Perez, and J. Rodriguez-Hernandez. 2018. “Exploratory study of porous asphalt mixtures with additions of reclaimed tetra pak material.” Constr. Build. Mater. 160 (Nov): 233–239. https://doi.org/10.1016/j.conbuildmat.2017.11.067.
AS (Standards Australia). 1995. Methods of sampling and testing asphalt-determination of the permanent compressive strain characteristics of asphalt-dynamic creep test. AS 2891.12.1. Sydney, Australia: AS.
ASTM. 2015. Standard test method for Marshall stability and flow of asphalt mixtures. ASTM D6927-15. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard test method for indirect tensile (IDT) strength of asphalt mixtures. ASTM D6931-17. West Conshohocken, PA: ASTM.
ASTM. 2022a. Standard test method for measuring surface frictional properties using the British pendulum tester. ASTM E303-22. West Conshohocken, PA: ASTM.
ASTM. 2022b. Standard test method for percent air voids in compacted asphalt mixtures. ASTM D3203M-17. West Conshohocken, PA: ASTM.
Austroads. 2004. Pavement design: A guide to the structural design of road pavements. Sydney, NSW, Australia: Austroads.
Buritatum, A., A. Suddeepong, K. Akkharawongwhatthana, S. Horpibulsuk, T. Yaowarat, M. Hoy, and A. S. A. Rashid. 2023. “Hemp fiber-modified asphalt concretes with reclaimed asphalt pavement for low-traffic roads.” Sustainability 15 (8): 6860. https://doi.org/10.3390/su15086860.
Buritatum, A., A. Suddeepong, S. Horpibulsuk, K. Akkharawongwhatthana, T. Yaowarat, M. Hoy, and A. Arulrajah. 2022. “Improved performance of asphalt concretes using bottom ash as an alternative aggregate.” Sustainability 14 (12): 7033. https://doi.org/10.3390/su14127033.
Cai, X., K. H. Wu, W. K. Huang, and C. Wan. 2018. “Study on the correlation between aggregate skeleton characteristics and rutting performance of asphalt mixture.” Constr. Build. Mater. 179 (Aug): 294–301. https://doi.org/10.1016/j.conbuildmat.2018.05.153.
CEN (European Committee for Standardization). 2004. Bituminous mixtures-test methods for hot mix asphalt-Part 24: Resistance to fatigue. EN 12697-24. Brussels, Belgium: CEN.
Chen, S., Z. You, S. L. Yang, A. Garcia, and L. Rose. 2021. “Influence of air void structures on the coefficient of permeability of asphalt mixtures.” Powder Technol. 377 (Jan): 1–9. https://doi.org/10.1016/j.powtec.2020.08.082.
Cheriaf, M., J. C. Rocha, and J. Pera. 1999. “Pozzolanic properties of pulverized coal combustion bottom ash.” Cem. Concr. Res. 29 (9): 1387–1391. https://doi.org/10.1016/S0008-8846(99)00098-8.
Fwa, T. F., Y. S. Choo, and Y. Liu. 2003. “Effect of aggregate spacing on skid resistance of asphalt pavement.” J. Transp. Eng. 129 (4): 420–426. https://doi.org/10.1061/(ASCE)0733-947X(2003)129:4(420).
Gupta, A., P. Lastra-Gonzalez, J. Rodriguez-Hernandez, M. G. González, and D. Castro-Fresno. 2021. “Critical assessment of new polymer-modified bitumen for porous asphalt mixtures.” Constr. Build. Mater. 307 (Nov): 124957. https://doi.org/10.1016/j.conbuildmat.2021.124957.
Hassan, H. F., and K. S. Al-Jabri. 2005. “Effect of organic fibers on open-graded friction course mixture properties.” Int. J. Pavement Eng. 6 (1): 67–75. https://doi.org/10.1080/10298430500087936.
Jang, A., and I. S. Kim. 2000. “Solidification and stabilization of Pb, Zn, Cd and Cu in tailing wastes using cement and fly ash.” Miner. Eng. 13 (14–15): 1659–1662. https://doi.org/10.1016/S0892-6875(00)00151-5.
Kim, H., and H. K. Lee. 2015. “Coal bottom ash in field of civil engineering: A review of advanced applications and environmental considerations.” KSCE J. Civ. Eng. 19 (6): 1802–1818. https://doi.org/10.1007/s12205-015-0282-7.
Ksaibati, K., and J. Stephen. 1999. Utilization of bottom ash in asphalt mixes. Laramie, WY: Univ. of Wyoming.
Liu, Q., Á. García, E. Schlangen, and M. van de Ven. 2011. “Induction healing of asphalt mastic and porous asphalt concrete.” Constr. Build. Mater. 25 (9): 3746–3752. https://doi.org/10.1016/j.conbuildmat.2011.04.016.
Liu, Q., E. Schlangen, Á. García, and M. van de Ven. 2010. “Induction heating of electrically conductive porous asphalt concrete.” Constr. Build. Mater. 24 (7): 1207–1213. https://doi.org/10.1016/j.conbuildmat.2009.12.019.
Liu, Q., E. Schlangen, and M. Van De Ven. 2012. “Induction healing of porous asphalt.” Transp. Res. Rec. 2305 (1310): 95–101. https://doi.org/10.3141/2305-10.
Luo, H. L., S. H. Chen, D. F. Lin, and X. R. Cai. 2017. “Use of incinerator bottom ash in open-graded asphalt concrete.” Constr. Build. Mater. 149 (Sep): 497–506. https://doi.org/10.1016/j.conbuildmat.2017.05.164.
Ma, C. J., J. H. Kim, K. H. Kim, S. Tohno, and M. Kasahara. 2010. “Specification of chemical properties of feed coal and bottom ash collected at a coal-fired power plant.” Asian J. Atmos. Environ. 4 (2): 80–88. https://doi.org/10.5572/ajae.2010.4.2.080.
Ma, X., Q. Li, Y. C. Cui, and A. Q. Ni. 2018. “Performance of porous asphalt mixture with various additives.” Int. J. Pavement Eng. 19 (4): 355–361. https://doi.org/10.1080/10298436.2016.1175560.
Siriphun, S., C. Chotisakul, and S. Horpibulsuk. 2016. “Skid-resistance of asphalt concrete at construction stage based on Thai aggregate.” J. Mater. Civ. Eng. 28 (12): 04016145. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001662.
Slebi-Acevedo, C. J., P. Lastra-González, I. Indacoechea-Vega, and D. Castro-Fresno. 2020. “Laboratory assessment of porous asphalt mixtures reinforced with synthetic fibers.” Constr. Build. Mater. 234 (Feb): 117224. https://doi.org/10.1016/j.conbuildmat.2019.117224.
Suddeepong, A., A. Buritatum, S. Dasdawan, S. Horpibulsuk, Y. Yaowarat, M. Hoy, and A. Arulrajah. 2023. “Mechanical performance of porous asphalt concretes incorporating bottom ash as fine aggregate.” J. Mater. Civ. Eng. 36 (6): 0403129. https://doi.org/10.1061/JMCEE7.MTENG-15233.
Thailand Department of Highways. 1988. Specification for asphalt cement. DH-SP 401/1988. Bangkok, Thailand: Thailand Department of Highways.
Thailand Department of Highways. 1993. Specification for polymer modified asphalt cement for porous asphalt concrete. DH-S 407/1993. Bangkok, Thailand: Thailand Department of Highways.
Thailand Department of Highways. 1999. Porous asphalt concrete. DH-S 414/1999. Bangkok, Thailand: Thailand Department of Highways.
Thailand Department of Highways. 2001. Standard for material testing. DH-S 413/2001. Bangkok, Thailand: Thailand Department of Highways.
Thailand Office of Transport and Traffic Policy and Planning. 2019. Annual report 2019. Transport Infrastructure Status Rep. 2019. Bangkok, Thailand: Thailand Office of Transport and Traffic Policy and Planning.
Torbruegge, S., and B. Wies. 2015. “Characterization of pavement texture by means of height difference correlation and relation to wet skid resistance.” J. Traffic Transp. Eng. 2 (2): 59–67. https://doi.org/10.1016/j.jtte.2015.02.001.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: May 18, 2023
Accepted: Sep 8, 2023
Published online: Feb 20, 2024
Published in print: May 1, 2024
Discussion open until: Jul 20, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.