Effects of Mix Proportion and Cyclic Loading on the Stress–Strain Behavior of a Flexible Thin Spray-On Liner under Uniaxial Compression
Publication: Journal of Materials in Civil Engineering
Volume 36, Issue 5
Abstract
To investigate the effects of mix proportion on the compressive mechanical properties of a flexible thin spray-on liner (TSL), a series of compression tests were performed on flexible TSL specimens with different styrene-acrylic emulsion contents (), cement–sand ratios (), and fiberglass contents (). With an increase in , the compressive strength of the flexible TSL first increased and then decreased, and the TSL gradually transformed from brittle to ductile. With an increase in , the compressive strength increased. The increase of improved the compressive strength and elastic modulus of the TSL. Subsequently, three cyclic loading paths were selected to study the stress–strain behavior of a flexible TSL with a fixed mix proportion. The evolution characteristics of the irreversible axial strain, elastic modulus, dissipated energy, and damage variables under different cyclic loading paths were analyzed. The development of irreversible deformation accumulation reflects the characteristics of the damage evolution process under cyclic loading. Based on the experimental results, a stress–strain model is proposed to predict the stress–strain behavior of the TSL under different cyclic loading paths. The experimental results were used to calibrate and validate this model, demonstrating that the model can effectively predict the stress–strain behavior of a flexible TSL.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The statistical analysis methods and data that support the findings of this study are available from the corresponding author by request.
Acknowledgments
This research was funded by the National Key Research and Development Program of China (No. 2021YFC2902103), the Natural Science Foundation of Shandong Province (Grant nos. ZR2021ZD36 and ZR2021QE127), and the National Natural Science Foundation of China (Grant no. 52108373).
References
Akbarpour, A., M. Mahdikhani, and R. Z. Moayed. 2022a. “Effects of natural zeolite and sulfate ions on the mechanical properties and microstructure of plastic concrete.” Front. Struct. Civ. Eng. 16 (1): 86–98. https://doi.org/10.1007/s11709-021-0793-x.
Akbarpour, A., M. Mahdikhani, and R. Z. Moayed. 2022b. “Mechanical behavior and permeability of plastic concrete containing natural zeolite under triaxial and uniaxial compression.” J. Mater. Civ. Eng. 34 (2): 04021453. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004093.
ASTM. 2010. Standard test method for compressive properties of rigid plastics. ASTM D-695-10. West Conshohocken, PA: ASTM.
Cerfontaine, B., and F. Collin. 2018. “Cyclic and fatigue behaviour of rock materials: Review, interpretation and research perspectives.” Rock Mech. Rock Eng. 51 (2): 391–414. https://doi.org/10.1007/s00603-017-1337-5.
CS (Chinese Standard). 2015. Code for design of concrete structures. [In Chinese.] GB50010-2010. Beijing: China Architecture and Building Press.
CS (Chinese Standard). 2019. Standard for test methods of concrete physical and mechanical properties. [In Chinese.] GB/T 50081-2019. Beijing: Chinese Standardization Administration.
Dondapati, G. K., D. Deb, I. Porter, and S. Karekal. 2022. “Improvement of strength-deformability behaviour of rock-like materials and coal using fibre-reinforced thin spray-on liner (FR-TSL).” Rock Mech. Rock Eng. 55 (7): 3997–4013. https://doi.org/10.1007/s00603-022-02825-8.
Ezeldin, A. S., and P. N. Balaguru. 1992. “Normal and high-strength fiber-reinforced concrete under compression.” J. Mater. Civ. Eng. 4 (4): 415–429. https://doi.org/10.1061/(ASCE)0899-1561(1992)4:4(415).
Faradonbeh, R. S., A. Taheri, and M. Karakus. 2021. “Post-peak behaviour of rocks under cyclic loading using a double-criteria damage-controlled test method.” Bull. Eng. Geol. Environ. 80 (2): 1713–1727. https://doi.org/10.1007/s10064-020-02035-y.
Faradonbeh, R. S., A. Taheri, and M. Karakus. 2022. “Fatigue failure characteristics of sandstone under different confining pressures.” Rock Mech. Rock Eng. 55 (3): 1227–1252. https://doi.org/10.1007/s00603-021-02726-2.
Guner, D., and H. Ozturk. 2016. “Experimental and numerical analysis of the effects of curing time on tensile mechanical properties of thin spray-on liners.” Rock Mech. Rock Eng. 49 (8): 3205–3222. https://doi.org/10.1007/s00603-016-0997-x.
Hany, N. F., E. G. Hantouche, and M. H. Harajli. 2015. “Axial stress–strain model of CFRP confined concrete under monotonic and cyclic loading.” J. Compos. Constr. 19 (6): 04015004. https://10.1061/(ASCE)CC.1943-5614.0000557.
Jjuuko, S., and D. Kalumba. 2016. “Application of thin spray-on liners for rock surface support in south African mines–A review.” Int. J. Innovative Res. Adv. Eng. (IJIRAE) 3 (07): 2349–2763. https://doi.org/10.17632/zzjfbd8tsj.1.
Kazmi, S., M. J. Munir, Y. Wu, I. Patnaikuni, and Y. Zhou, and F. Xing. 2019. “Axial stress–strain behavior of macro-synthetic fiber reinforced recycled aggregate concrete.” Cem. Concr. Compos. 97 (Feb): 341–356. https://doi.org/10.1016/j.cemconcomp.2019.01.005.
Lam, L., and J. G. Teng. 2009. “Stress–strain model for FRP-confined concrete under cyclic axial compression.” Eng. Struct. 31 (2): 308–321. https://doi.org/10.1016/j.engstruct.2008.08.014.
Li, P., and Y.-F. Wu. 2015. “Stress–strain model of FRP confined concrete under cyclic loading.” Compos. Struct. 134 (Feb): 60–71. https://doi.org/10.1016/j.compstruct.2015.08.056.
Li, T., X. Pei, D. Wang, R. Huang, and H. Tang. 2019a. “Nonlinear behavior and damage model for fractured rock under cyclic loading based on energy dissipation principle.” Eng. Fract. Mech. 206 (Jan): 330–341. https://doi.org/10.1016/j.engfracmech.2018.12.010.
Li, X., G. Qu, C. Yuan, and D. Teng. 2019b. “Study on new polymer spray-layer material and its spray support technology for weakly cemented rock roadway.” J. Min. Saf. Eng. 36 (1): 95–102.
Li, X., C. Yuan, D. Teng, S. Yuan, P. Guo, and Z. Liang. 2017a. “Experimental study on material ratio and mechanical properties of flexible spraying material in soft rock roadway.” Coal Eng. 50 (10): 131–141.
Li, Z., B. Nocelli, and S. Saydam. 2017b. “Effect of rock strength and surface roughness on adhesion strength of thin spray-on liners.” Int. J. Rock Mech. Min. Sci. 91 (Jan): 195–202. https://doi.org/10.1016/j.ijrmms.2016.11.011.
Liang, H., J. Han, C. Cao, and S. Ma. 2021. “Laboratory study of deformation behaviour of two new reinforcing polymeric TSLs and their potential application in deep underground coal mine.” Polymers 13 (13): 2205. https://doi.org/10.3390/polym13132205.
Liu, J., H. Xie, Z. Hou, C. Yang, and L. Chen. 2013. “Damage evolution of rock salt under cyclic loading in unixial tests.” Acta Geotech. 9 (May): 153–160. https://doi.org/10.1007/s11440-013-0236-5.
Liu, Y., F. Dai, P. Fan, N. Xu, and L. Dong. 2017. “Experimental investigation of the influence of joint geometric configurations on the mechanical properties of intermittent jointed rock models under cyclic uniaxial compression.” Rock Mech. Rock Eng. 50 (6): 1453–1471. https://doi.org/10.1007/s00603-017-1190-6.
Mahboubi, A., and A. Ajorloo. 2005. “Experimental study of the mechanical behavior of plastic concrete in triaxial compression.” Cem. Concr. Res. 35 (2): 412–419. https://doi.org/10.1016/j.cemconres.2004.09.011.
Mason, D. P., and T. R. Stacey. 2008. “Support to rock excavations provided by sprayed liners.” Int. J. Rock Mech. Min. Sci. 45 (5): 773–788. https://doi.org/10.1016/j.ijrmms.2007.09.001.
Ortlepp, W. D., and T. R. Stacey. 1998. “Performance of tunnel support under large deformation static and dynamic loading.” Tunnelling Underground Space Technol. 13 (1): 15–21. https://doi.org/10.1016/S0886-7798(98)00022-4.
Ozturk, H. 2012. “Work of adhesion of thin spray-on liners.” Rock Mech. Rock Eng. 45 (6): 1095–1102. https://doi.org/10.1007/s00603-012-0238-x.
Ozturk, H., and D. Guner. 2017. “Failure analysis of thin spray-on liner coated rock cores.” Eng. Fail. Anal. 79 (Apr): 25–33. https://doi.org/10.1016/j.engfailanal.2017.03.024.
Ozturk, H., and D. Guner. 2019. “Laboratory and distinct element analysis of the deformability behaviour of thin spray-on liners.” Int. J. Rock Mech. Min. Sci. 123 (Mar): 104118. https://doi.org/10.1016/j.ijrmms.2019.104118.
Ozturk, H., and D. D. Tannant. 2010. “Thin spray-on liner adhesive strength test method and effect of liner thickness on adhesion.” Int. J. Rock Mech. Min. Sci. 47 (5): 808–815. https://doi.org/10.1016/j.ijrmms.2010.05.004.
Peng, K., J. Zhou, Q. Zou, J. Zhang, and F. Wu. 2019. “Effects of stress lower limit during cyclic loading and unloading on deformation characteristics of sandstones.” Constr. Build. Mater. 217 (Aug): 202–215. https://doi.org/10.1016/j.conbuildmat.2019.04.183.
Qiao, Q. 2015. “Experimental and numerical analysis of thin spray-on liner materials for use in underground mines.” Ph.D. dissertation, School of Civil, Mining and Environmental Engineering, Univ. of Wollongong.
Qiao, Q., H. Chai, T. Zhang, and H. Zhang. 2022. “Modification of cement-based thin spray material by redispersible emulsion powder.” Bull. Chin. Ceram. Soc. 41 (10): 3396–3402. https://doi.org/10.16552/j.cnki.issn1001-1625.20220909.002.
Qiao, Q., J. Nemcik, and I. Porter. 2014. “Shear strength testing of glass fibre reinforced thin spray-on liner.” Geotech. Lett. 4 (4): 250–254. https://doi.org/10.1680/geolett.14.00057.
Qiao, Q., J. Nemcik, and I. Porter. 2015a. “A new approach for determination of the shear bond strength of thin spray-on liners.” Int. J. Rock Mech. Min. Sci. 73 (Aug): 54–61. https://doi.org/10.1016/j.ijrmms.2014.09.023.
Qiao Q., J. Nemcik, I. Porter, and E. Baafi. 2015b. “Compressive strength testing of Toughskin thin spray-on liner.” In Proc., 15th Coal Operators’ Conf., the Australasian Institute of Mining and Metallurgy and Mine Managers Association of Australia, 198–203. Wollongong, Australia: Univ. of Wollongong.
Shan, Z., I. Porter, J. Nemcik, E. Baafi, and Z. Zhang. 2020. “Investigation on the rock surface support performance of welded steel mesh and thin spray-on liners using full-scale laboratory testing.” Rock Mech. Rock Eng. 53 (1): 171–183. https://doi.org/10.1007/s00603-019-01895-5.
Shao, Y., Z. Zhu, and A. Mirmiran. 2006. “Cyclic modeling of FRP-confined concrete with improved ductility.” Cem. Concr. Compos. 28 (9): 59–68. https://doi.org/10.1016/j.cemconcomp.2006.07.009.
Song, Z., T. Fruhwirt, and H. Konietzky. 2018. “Characteristics of dissipated energy of concrete subjected to cyclic loading.” Constr. Build. Mater. 168 (Apr): 46–60. https://doi.org/10.1016/j.conbuildmat.2018.02.076.
Stacey, T. R. 2001. “Review of membrane support mechanisms, loading mechanisms, desired membrane performance, and appropriate test methods.” J. S. Afr. Inst. Min. Metall. 101 (7): 343–351.
Taheri, A., and F. Tatsuoka. 2012. “Stress–strain relations of cement-mixed gravelly soil from multiple-step triaxial compression test results.” Soils Found. 52 (4): 748–766. https://doi.org/10.1016/j.sandf.2012.07.014.
Tannant, D. D. 2001. “Thin spray-on liners for underground rock support.” In Proc., 17th International Mining Congress and Exhibition of Turkey- IMCET. Ankara, Turkey: Chamber of Mining Engineers of Turkey.
Wang, Q., B. Jiang, R. Pan, S. Li, M. He, H. Sun, Q. Qin, H. Yu, and Y. Luan. 2018. “Failure mechanism of surrounding rock with high stress and confined concrete support system.” Int. J. Rock Mech. Min. Sci. 102 (Feb): 89–100. https://doi.org/10.1016/j.ijrmms.2018.01.020.
Wang, Z., D. Wang, S. T. Smith, and D. Lu. 2012. “Experimental testing and analytical modeling of CFRP-confined large circular RC columns subjected to cyclic axial compression.” Eng. Struct. 40 (Apr): 64–74. https://doi.org/10.1016/j.engstruct.2012.01.004.
Wei, Q., N. Zhang, X. Feng, Z. Xie, J. Wu, and J. Cao. 2019. “Influence of polypropylene fiber on tensile property of a cement-polymer based thin spray-on liner.” Appl. Sci.-Basel 9 (14): 2876. https://doi.org/10.3390/app9142876.
Xiao, J.-Q., D.-X. Ding, F.-L. Jiang, and G. Xu. 2010. “Fatigue damage variable and evolution of rock subjected to cyclic loading.” Int. J. Rock Mech. Min. Sci. 47 (3): 461–468. https://doi.org/10.1016/j.ijrmms.2009.11.003.
Xu, W., and L. Wei. 2002. “Study on statistical damage constitutive model of rock.” Chin. J. Rock Mech. Eng. 21 (6): 787–791.
Yang, S. Q., Y. Z. Jiang, W. Y. Xu, and X. Q. Chen. 2008. “Experimental investigation on strength and failure behavior of pre-cracked marble under conventional triaxial compression.” Int. J. Solids Struct. 45 (17): 4796–4819. https://doi.org/10.1016/j.ijsolstr.2008.04.023.
Yang, S.-Q., W.-L. Tian, and P. G. Ranjith. 2017. “Experimental investigation on deformation failure characteristics of crystalline marble under triaxial cyclic loading.” Rock Mech. Rock Eng. 50 (11): 2871–2889. https://doi.org/10.1007/s00603-017-1262-7.
Yilmaz, H. 2010. “Tensile strength testing of thin spray-on liner products (TSL) and shotcrete.” J. S. Afr. Inst. Min. Metall. 110 (10): 559–569.
Zhang, C., X.-T Feng, H. Zhou, S.-L. Qiu, and Y.-S. Yang. 2014. “Rock mass damage induced by rockbursts occurring on tunnel floors: A case study of two tunnels at the Jinping II hydropower station.” Environ. Earth Sci. 71 (Apr): 441–450. https://doi.org/10.1007/s12665-013-2451-7https://doi.org/10.1007/s12665-013-2451-7.
Zhao, Y.-M., X.-T Feng, Q. Jiang, Y. Han, Y.-Y. Zhou, H-G. Guo, Y.-Y. Kou, and Y.-E. Shi. 2021. “Large deformation control of deep roadways in fractured hard rock based on cracking-restraint method.” Rock Mech. Rock Eng. 54 (5): 2559–2580. https://doi.org/10.1007/s00603-021-02384-4.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Apr 29, 2023
Accepted: Oct 6, 2023
Published online: Feb 20, 2024
Published in print: May 1, 2024
Discussion open until: Jul 20, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.