Effect of Phase Geometry on the Dielectric Properties of Tricalcium Silicate Paste Based on Effective Medium Theory
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 11
Abstract
This paper presents a cross-scale prediction of the dielectric properties of long-term-cured tricalcium silicate () paste specimens and investigated the effect of different phase geometry models on the prediction results. Firstly, the dielectric properties of paste specimens cured for 180 days were tested. Based on tests such as X-ray diffraction (XRD) and mercury intrusion porosity (MIP), the types of phases and the volume fractions of individual phases in the paste specimens were determined. Subsequently, the dielectric performance of the phases was measured. The dielectric performance linkage between each phase and the paste specimen was established based on the effective medium theory. The effects of three morphological models of the phase on the predicted results were dissected. The results showed that the volume fraction and dielectric constant of calcium silicate hydrates (C-S-H) gel were significantly higher than those of other phases in the paste specimens. Among the three computational models of phase geometry, the standard spherical phase model produced the best prediction. The prediction results of the standard spherical model improved the accuracy by more than 45.8% compared with that of the oblate phase model and the prolate phase model. Among the phases, the trend of the dielectric constant of C-S-H gels with frequency was the most similar to the results obtained by the three prediction models.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors acknowledge the financial support by the National Natural Science Foundation of China (52078015) and the Beijing Natural Science Foundation (8202005).
References
Amiri, M., M. Aryanpour, and F. Porhonar. 2022. “Microstructural study of concrete performance after exposure to elevated temperatures via considering C–S–H nanostructure changes.” High Temp. Mater. Processes 41 (1): 224–237. https://doi.org/10.1515/htmp-2022-0030.
Bernard, O., F.-J. Ulm, and E. Lemarchand. 2003. “A multiscale micromechanics-hydration model for the early-age elastic properties of cement-based materials.” Cem. Concr. Res. 33 (9): 1293–1309. https://doi.org/10.1016/S0008-8846(03)00039-5.
Cerveny, S., S. Arrese-Igor, J. S. Dolado, J. J. Gaitero, A. Alegra, and J. Colmenero. 2011. “Effect of hydration on the dielectric properties of C-S-H gel.” J. Chem. Phys. 134 (3): 34509. https://doi.org/10.1063/1.3521481.
Chen, J. J., L. Sorelli, M. Vandamme, F.-J. Ulm, and G. Chanvillard. 2010. “A coupled nanoindentation/SEM-EDS study on low water/cement ratio Portland cement paste: Evidence for C-S-H/Ca(OH)2 nanocomposites.” J. Am. Ceram. Soc. 93 (5): 1484–1493. https://doi.org/10.1111/j.1551-2916.2009.03599.x.
Chi, O. A., and J. A. Kong. 2002. “Analytical approximations in multiple scattering of electromagnetic waves by aligned dielectric spheroids.” OSAJ 19 (6): 1145–1156. https://doi.org/10.1364/JOSAA.19.001145.
Dervos, C. T., J. A. Mergos, and A. A. Iosifides. 2005. “Characterization of insulating particles by dielectric spectroscopy: Case study for powders.” Mater. Lett. 59 (22): 2842–2849. https://doi.org/10.1016/j.matlet.2005.03.066.
Duan, P., Z. Shui, W. Chen, and C. Shen. 2013. “Efficiency of mineral admixtures in concrete: Microstructure, compressive strength and stability of hydrate phases.” Appl. Clay Sci. 83–84 (Jun): 115–121. https://doi.org/10.1016/j.clay.2013.08.021.
Eshelby, J. D. 1957. “The determmination of the elastic field of an ellipsoidal inclusion and related problems.” Proc. R. Soc. London, Ser. A 241 (1226): 376–396. https://doi.org/10.1098/rspa.1957.0133.
Georget, F., W. Wilson, and K. L. Scrivener. 2021. “edxia: Microstructure characterisation from quantified SEM-EDS hypermaps.” Cem. Concr. Res. 141 (Mar): 106327. https://doi.org/10.1016/j.cemconres.2020.106327.
Göbel, L., C. Bos, R. Schwaiger, A. Flohr, and A. Osburg. 2018. “Micromechanics-based investigation of the elastic properties of polymer-modified cementitious materials using nanoindentation and semi-analytical modeling.” Cem. Concr. Compos. 88 (Jan): 100–114. https://doi.org/10.1016/j.cemconcomp.2018.01.010.
Guenego, L., F. Rivet, G. Ferre, A. Walzik, A. Souhayl, and A. Karbab. 2021. “A low-cost IoT-based device to measure exposure to sub-6GHz 5G waves.” In Proc., 28th IEEE Int. Conf. on Electronics, Circuits, and Systems (ICECS), 1–4. New York: IEEE. https://doi.org/10.1109/ICECS53924.2021.9665585.
Guihard, V., C. Patapy, J. Sanahuja, J.-P. Balayssac, F. Taillade, and B. Steck. 2020. “Effective medium theories in electromagnetism for the prediction of water content in cement pastes.” Int. J. Eng. Sci. 150 (Apr): 103273. https://doi.org/10.1016/j.ijengsci.2020.103273.
Hilloulin, B., and V. Q. Tran. 2022. “Using machine learning techniques for predicting autogenous shrinkage of concrete incorporating superabsorbent polymers and supplementary cementitious materials.” J. Build. Eng. 49 (15): 104086. https://doi.org/10.1016/j.jobe.2022.104086.
Jennings, H. M. 2008. “Refinements to colloid model of C-S-H in cement: CM-II.” Cem. Concr. Res. 38 (3): 275–289. https://doi.org/10.1016/j.cemconres.2007.10.006.
Kallel, H., H. Carré, C. Laborderie, B. Masson, and N. C. Tran. 2018. “Evolution of mechanical properties of concrete with temperature and humidity at high temperatures.” Cem. Concr. Compos. 91 (Aug): 59–66. https://doi.org/10.1016/j.cemconcomp.2018.04.014.
Koppel, T., A. Shishkin, H. Haldre, N. Toropovs, I. Vilcane, and P. Tint. 2017. “Reflection and transmission properties of common construction materials at 2.4 GHz frequency.” Energy Procedia 113 (May): 158–165. https://doi.org/10.1016/j.egypro.2017.04.045.
Krakowiak, J. K., W. Wilson, S. James, S. Musso, and F.-J. Ulm. 2015. “Inference of the phase-to-mechanical property link via coupled X-ray spectrometry and indentation analysis: Application to cement-based materials.” Cem. Concr. Res. 67 (Aug): 271–285. https://doi.org/10.1016/j.cemconres.2014.09.001.
Kröner, E. 1958. “Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls.” Zeitschrift ffir Physik 151 (4): 504–518.
Li, J., G. Geng, R. Myers, Y.-S. Yu, D. Shapiro, C. Carraro, R. Maboudian, and P. J. M. Monteiro. 2019. “The chemistry and structure of calcium (alumino) silicate hydrate: A study by XANES, ptychographic imaging, and wide- and small-angle scattering.” Cem. Concr. Res. 115 (Jan): 367–378. https://doi.org/10.1016/j.cemconres.2018.09.008.
Li, J., W. Zhang, P. Sanz-Camacho, M. Duttine, D. Gardner, C. Carraro, R. Maboudian, and T. Huthwelker. 2022. “The nanomechanical properties of non-crosslinked calcium aluminosilicate hydrate: The influences of tetrahedral Al and curing age.” Cem. Concr. Res. 159 (2022). 106900. https://doi.org/10.1016/j.cemconres.2022.106900.
Li, Y., H. Li, Z. Wang, and C. Jin. 2020. “Effect and mechanism analysis of functionalized multi-walled carbon nanotubes (MWCNTs) on C-S-H gel.” Cem. Concr. Res. 128 (Feb): 105955. https://doi.org/10.1016/j.cemconres.2019.105955.
Liang, S., and Y. Wei. 2020. “Imperfect interface effect on creep property of hardened-cement pastes: Investigations from nano to micro scales.” J. Mater. Civ. Eng. 32 (7): 1–16. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003238.
Liu, W., H. Li, Q. Zeng, H. Duan, Y. Guo, X. Liu, C. Sun, and H. Liu. 2015. “Fabrication of ultralight three-dimensional graphene networks with strong electromagnetic wave absorption properties.” J. Mater. Chem. A 3 (7): 3739–3747. https://doi.org/10.1039/C4TA06091A.
Liu, Y., S. J. Chen, K. Sagoe-Crentsil, and W. Duan. 2021. “Evolution of tricalcium silicate () hydration based on image analysis of microstructural observations obtained via Field’s metal intrusion.” Mater. Charact. 181 (Jun): 111457. https://doi.org/10.1016/j.matchar.2021.111457.
Luo, J., and R. Stevens. 1999. “Porosity-dependence of elastic moduli and hardness of 3Y-TZP ceramics.” Ceram. Int. 25 (5): 281–286. https://doi.org/10.1016/S0272-8842(98)00037-6.
Lv, X., Y. Duan, and G. Chen. 2018. “Electromagnetic wave absorption properties of cement-based composites filled with graphene nano-platelets and hollow glass microspheres.” Constr. Build. Mater. 162 (Feb): 280–285. https://doi.org/10.1016/j.conbuildmat.2017.12.047.
Manchiryal, R. K., and N. Neithalath. 2009. “Analysis of the influence of material parameters on electrical conductivity of cement pastes and concretes.” Mag. Concr. Res. 61 (4): 257–270. https://doi.org/10.1680/macr.2008.00064.
Motojima, S., Y. Noda, S. Hoshiya, and Y. Hishikawa. 2003. “Electromagnetic wave absorption property of carbon microcoils in 12–110 GHz region.” J. Appl. Phys. 94 (4): 2325–2330. https://doi.org/10.1063/1.1589603.
Nicolson, A. M. 1970. “Measurement of the intrinsic properties of materials by time-domain techniques.” IEEE Trans. Biomed. Eng. 19 (4): 377–382. https://doi.org/10.1109/TIM.1970.4313932.
Ohlan, A., K. Singh, A. Chandra, and S. K. Dhawan. 2008. “Microwave absorption properties of conducting polymer composite with barium ferrite nanoparticles in 12.4–18 GHz.” Appl. Phys. Lett. 93 (5): 053114. https://doi.org/10.1063/1.2969400.
Ozturk, M., M. Karaaslan, O. Akgol, and U. K. Sevim. 2020. “Mechanical and electromagnetic performance of cement based composites containing different replacement levels of ground granulated blast furnace slag, fly ash, silica fume and rice husk ash.” Cem. Concr. Res. 136 (Jul): 106177. https://doi.org/10.1016/j.cemconres.2020.106177.
Paul, D., and H. M. J. Tennis. 2000. “A model for two types of calcium silicate hydrate in the microstructure of Portland cement pastes.” Cem. Concr. Res. 30 (12): 1869–1877. https://doi.org/10.1016/S0008-8846(00)00286-6.
Penido, R., E.-K. Paixão, L. C. B. Costa, R. A. F. Peixoto, A. A. Cury, and J. C. Mendes. 2022. “Predicting the compressive strength of steelmaking slag concrete with machine learning—Considerations on developing a mix design tool.” Constr. Build. Mater. 341 (Jul): 127896. https://doi.org/10.1016/j.conbuildmat.2022.127896.
Petersen, T., P.-L. Valdenaire, R. Pellenq, and F.-J. Ulm. 2018. “A reaction model for cement solidification: Evolving the C–S–H packing density at the micrometer-scale.” J. Mech. Phys. Solids 118 (Jun): 58–73. https://doi.org/10.1016/j.jmps.2018.05.010.
Prasad, R., A. Mahmoud, and S. K. S. Parashar. 2019. “Enhancement of electromagnetic shielding and piezoelectric properties of White Portland cement by hydration time.” Constr. Build. Mater. 204 (Apr): 20–27. https://doi.org/10.1016/j.conbuildmat.2019.01.140.
Sanahuja, J., L. Dormieux, and G. Chanvillard. 2007. “Modelling elasticity of a hydrating cement paste.” Cem. Concr. Res. 37 (10): 1427–1439. https://doi.org/10.1016/j.cemconres.2007.07.003.
Sankaran, S., K. Deshmukh, M. B. Ahamed, and S. K. K. Pasha. 2018. “Recent advances in electromagnetic interference shielding properties of metal and carbon filler reinforced flexible polymer composites: A review.” Composites, Part A 114 (9): 49–71. https://doi.org/10.1016/j.compositesa.2018.08.006.
Scrivener, K., A. Ouzia, P. Juilland, and A. Kunhi Mohamed. 2019. “Advances in understanding cement hydration mechanisms.” Cem. Concr. Res. 124 (Oct): 105823. https://doi.org/10.1016/J.CEMCONRES.2019.105823.
Scrivener, K. L. 2004. “Backscattered electron imaging of cementitious microstructures: Understanding and quantification.” Cem. Concr. Compos. 26 (8): 935–945. https://doi.org/10.1016/j.cemconcomp.2004.02.029.
Shen, Y., Q. Li, S. Xu, and X. Liu. 2021. “Electromagnetic wave absorption of multifunctional cementitious composites incorporating polyvinyl alcohol (PVA) fibers and fly ash: Effects of microstructure and hydration.” Cem. Concr. Res. 143 (May): 106389. https://doi.org/10.1016/j.cemconres.2021.106389.
Sihvola A. H., and I. V. Lindell. 1972. “Polarizabiliy modeling of heterogeneous media.” Prog. Electromag. Res. 6: 101–151. https://doi.org/10.1016/j.cemconres.2021.106389.
Silva, F. G. S., R. A. Fiuza Junior, J. S. da Silva, C. M. S. R. de Brito, H. M. C. Andrade, and J. P. Gonçalves. 2013. “Consumption of calcium hydroxide and formation of C–S–H in cement pastes.” J. Therm. Anal. Calorim. 116 (1): 287–293. https://doi.org/10.1007/s10973-013-3546-9.
Singh, A. K., A. Shishkin, T. Koppel, and N. Gupta. 2018. “A review of porous lightweight composite materials for electromagnetic interference shielding.” Composites, Part B 149 (Sep): 188–197. https://doi.org/10.1016/j.compositesb.2018.05.027.
Soin, A. V., L. J. J. Catalan, and S. D. Kinrade. 2013. “A combined QXRD/TG method to quantify the phase composition of hydrated Portland cements.” Cem. Concr. Res. 48 (Feb): 17–24. https://doi.org/10.1016/j.cemconres.2013.02.007.
Suwanmaneechot, P., A. Aili, and I. Maruyama. 2020. “Creep behavior of C-S-H under different drying relative humidities: Interpretation of microindentation tests and sorption measurements by multi-scale analysis.” Cem. Concr. Res. 132 (Jun): 106036. https://doi.org/10.1016/j.cemconres.2020.106036.
Thors, B., D. Colombi, Z. Ying, T. Bolin, and C. Tornevik. 2016. “Exposure to RF EMF from array antennas in 5G mobile communication equipment.” IEEE Access 4 (16): 7469–7478. https://doi.org/10.1109/ACCESS.2016.2601145.
Vandamme, M., F.-J. Ulm, and P. Fonollosa. 2010. “Nanogranular packing of C–S–H at substochiometric conditions.” Cem. Concr. Res. 40 (1): 14–26. https://doi.org/10.1016/j.cemconres.2009.09.017.
Wanasinghe, D., F. Aslani, and G. Ma. 2020. “Effect of water to cement ratio, fly ash, and slag on the electromagnetic shielding effectiveness of mortar.” Constr. Build. Mater. 256 (Apr): 119409. https://doi.org/10.1016/j.conbuildmat.2020.119409.
Wang, J., Z. Hu, Y. Chen, J. Huang, Y. Ma, W. Zhu, and J. Liu. 2022. “Effect of Ca/Si and Al/Si on micromechanical properties of C(-A)-S-H.” Cem. Concr. Res. 157 (Oct): 106811. https://doi.org/10.1016/j.cemconres.2022.106811.
Wang, W., Y. Duan, S. Liu, X. Li, and Z. Ji. 2009. “Absorption properties of carbonyl-iron/carbon black double-layer microwave absorbers.” J. Magn. Magn. Mater. 321 (20): 3442–3446. https://doi.org/10.1016/j.jmmm.2009.06.040.
Wang, Y., F. Luo, P. Wei, W. Zhou, and D. Zhu. 2015. “Enhanced dielectric properties and high-temperature microwave absorption performance of Zn-Doped ceramic.” J. Electron. Mater. 44 (7): 2353–2358. https://doi.org/10.1007/s11664-015-3787-4.
Wang, Z., T. Zhang, and L. Zhou. 2016. “Investigation on electromagnetic and microwave absorption properties of copper slag-filled cement mortar.” Cem. Concr. Compos. 74 (Nov): 174–181. https://doi.org/10.1016/j.cemconcomp.2016.10.003.
Xie, S., Z. Ji, B. Li, L. Zhu, and J. Wang. 2018. “Electromagnetic wave absorption properties of helical carbon fibers and expanded glass beads filled cement-based composites.” Composites, Part A 114 (Aug): 360–367. https://doi.org/10.1016/j.compositesa.2018.08.034.
Xie, S., Z. Ji, Y. Yang, G. Hou, and J. Wang. 2016. “Electromagnetic wave absorption properties of honeycomb structured plasterboards in S and C bands.” J. Build. Eng. 7 (Sep): 217–223. https://doi.org/10.1016/j.jobe.2016.06.008.
Xu, W., Y. Zhang, and B. Liu. 2020. “Influence of silica fume and low curing temperature on mechanical property of cemented paste backfill.” Constr. Build. Mater. 254 (Sep): 119305. https://doi.org/10.1016/j.conbuildmat.2020.119305.
Yang, F., X. Liu, P. Wang, S. Wang, I. Robinson, and B. Chen. 2021. “Investigation of spatial nano-structure development of the hardened C3S pastes by serial block-face SEM.” Mater. Charact. 174 (Apr): 110973. https://doi.org/10.1016/j.matchar.2021.110973.
Zhang, J., G. Li, W. Ye, Y. Chang, Q. Liu, and Z. Song. 2018. “Effects of ordinary Portland cement on the early properties and hydration of calcium sulfoaluminate cement.” Constr. Build. Mater. 186 (Oct): 1144–1153. https://doi.org/10.1016/j.conbuildmat.2018.08.008.
Zhu, X., C. Qian, B. He, Q. Chen, and Z. Jiang. 2020. “Experimental study on the stability of C-S-H nanostructures with varying bulk ratios under cryogenic attack.” Cem. Concr. Res. 135 (Sep): 106114. https://doi.org/10.1016/j.cemconres.2020.106114.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Dec 15, 2022
Accepted: Apr 11, 2023
Published online: Aug 29, 2023
Published in print: Nov 1, 2023
Discussion open until: Jan 29, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.