Interlaminar Shear Property and Strength Prediction Model for Hybrid Fiber-Reinforced Polymer Bar after Exposure to Simulated Concrete Environments
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 8
Abstract
The load-transfer mechanism in the fiber-reinforced polymer (FRP) bars is different from that of the conventional steel bars. The efficiency of stress transfer in FRP bars mainly depends on the mechanical properties of matrix resin, fibers, and fiber/matrix interface, which are easily degraded after long-term exposure to concrete environment. Herein, the interlaminar shear properties of a novel carbon/glass hybrid fiber-reinforced polymer (C/G-HFRP) bar were experimentally investigated by the accelerated aging tests at 60°C to study the effects of the ratio of carbon to glass fiber volume fractions, distribution configuration of carbon fiber, total fiber volume fraction, exposure environment, and exposure period. Water uptake tests, scanning electron microscopy, and Fourier transform infrared spectroscopy were employed to explore the degradation mechanisms of exposed samples. The results indicated that the interlaminar shear strength (ILSS) retention of exposed C/G-HFRP bars was higher than that of the single glass-FRP bar, which was decided by tooth force and friction. In addition, the degradation of C/G-HFRP bars was also related to water uptake rate, and then waterproof coating and fiber modification are recommended to improve the durability of C/G-HFRP bars. Finally, a model of ILSS retention was proposed for the C/G-HFRP bars after exposure to different concrete environments.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This research was partly supported by The National Natural Science Foundation of China (Grant No. 51978629).
Author contributions: Yu Zhang contributed to the investigation, conceptualization, methodology, writing the original draft, supervision, and writing-reviewing and editing; Danying Gao contributed to the investigation, supervision, and writing-review and editing; Dong Fang contributed to the writing-review and editing; Yuyang Pang contributed to the investigation, and writing-review and editing; Lin Yang contributed to the writing-review and editing; and Mingyan Lv contributed to the writing-review and editing.
References
Ali, A. H., H. M. Mohamed, and B. Benmokrane. 2020. “Bar size effect on long-term durability of sand-coated basalt-FRP composites bars.” Composites, Part B 195 (Aug): 108509. https://doi.org/10.1016/j.compositesb.2020.108059.
ASTM. 2014. Standard test method for moisture absorption properties and equilibrium conditioning of polymer matrix composite materials. ASTM D5229/D5229M-14. West Conshohocken, PA: ASTM.
ASTM. 2016. Standard test method for apparent horizontal shear strength of pultruded reinforced plastic rods by the shear beam method. ASTM D4475. West Conshohocken, PA: ASTM.
Benmokrane, B., A. H. Ali, H. M. Mohamed, and A. Elsafty. 2017. “Laboratory assessment and durability performance of vinyl-ester, polyester, and epoxy glass-FRP bars for concrete structures.” Composites, Part B 114 (Apr): 163–174. https://doi.org/10.1016/j.compositesb.2017.02.002.
Benmokrane, B., F. Elgabbas, E. A. Ahmed, and P. Cousin. 2015. “Characterization and comparative durability study of glass/vinylester, basalt/vinylester, and basalt/epoxy FRP bars.” J. Compos. Constr. 19 (6): 04015008. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000564.
Benmokrane, B., M. Hassan, M. Robert, and A. Manalo. 2020. “Effect of different constituent fiber, resin, and sizing combinations on alkaline resistance of basalt, carbon, and glass FRP bars.” J. Compos. Constr. 24 (3): 04020010. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001009.
Benmokrane, B., S. Mousa, K. Mohamed, and M. S. Ahmed. 2021. “Physical, mechanical, and durability characteristics of newly developed thermoplastic GFRP bars for reinforcing concrete structures.” Constr. Build. Mater. 276 (Mar): 122200. https://doi.org/10.1016/j.conbuildmat.2020.122200.
Chen, Y., J. F. Davalos, I. Ray, and H. Y. Kim. 2007. “Accelerated aging tests for evaluations of durability performance of FRP reinforcing bars for concrete structures.” Compos. Struct. 78 (1): 101–111. https://doi.org/10.1016/j.compstruct.2005.08.015.
Fergani, H., M. D. Benedetti, C. M. Oller, C. Lynsdale, and M. Guadagnini. 2018. “Durability and degradation mechanisms of GFRP reinforcement subjected to severe environments and sustained stress.” Constr. Build. Mater. 170 (May): 637–648. https://doi.org/10.1016/j.conbuildmat.2018.03.092.
Gao, D. Y., Y. Zhang, Y. Y. Pang, F. Z. Wen, D. Fang, and J. Y. Tang. 2022a. “Five-stage tensile constitutive model of hybrid fiber reinforced polymer bar.” J. Build. Eng. 58 (Oct): 105006. https://doi.org/10.1016/j.jobe.2022.105006.
Gao, D. Y., Y. Zhang, F. Z. Wen, D. Fang, and Y. Y. Pang. 2022b. “Design method and experiment verification for hybrid fiber reinforced polymer bars with both tensile ductility and different strength grades.” J. Build. Eng. 46 (Apr): 103723. https://doi.org/10.1016/j.jobe.2021.103723.
Gao, D. Y., Y. Zhang, F. Z. Wen, Y. Y. Pang, D. Fang, and M. Y. Lv. 2021. “Transverse shear properties of fiber reinforced polymer bars with different reinforced phases.” J. Compos. Mater. 55 (27): 4063–4078. https://doi.org/10.1177/00219983211031630.
Gao, D. Y., Y. Zhang, F. Z. Wen, J. Y. Tang, F. Dong, Y. Y. Pang, and Y. M. Yan. 2022c. “Interlaminar shear strength of hybrid fiber reinforced polymer bars: Based on proposed and existing test methods.” J. Reinf. Plast. Compos. 41 (23–24): 902–916. https://doi.org/10.1177/07316844221080579.
Guo, X. K., Z. Q. Jin, C. S. Xiong, T. Sun, N. Li, and Y. Yu. 2022. “Deterioration of mechanical properties of basalt/carbon hybrid FRP bars in SWSC under seawater corrosive environment.” Constr. Build. Mater. 317 (Jan): 125979. https://doi.org/10.1016/j.conbuildmat.2021.125979.
Liu, T. Q., X. Liu, and P. Feng. 2020. “A comprehensive review on mechanical properties of pultruded FRP composites subjected to long-term environmental effects.” Composites, Part B 191 (Jun): 107958. https://doi.org/10.1016/j.compositesb.2020.107958.
Lu, Z. Y., P. H. Huang, Z. P. Lei, F. Liu, and J. H. Xie. 2020a. “Durability of cement mortar-covered BFRP bars in simulated seawater environment.” Constr. Build. Mater. 234 (Feb): 117803. https://doi.org/10.1016/j.conbuildmat.2019.117803.
Lu, Z. Y., L. Z. Su, S. R. Tan, Y. C. Li, J. H. Xie, and F. Liu. 2020b. “Long-term shear performance of bare and cement mortar-coated BFRP bars in corrosive environments.” Constr. Build. Mater. 237 (Mar): 117658. https://doi.org/10.1016/j.conbuildmat.2019.117658.
Manalo, A., G. Maranan, B. Benmokrane, P. Cousin, O. Alajarmeh, W. Ferdous, R. Liang, and G. Hota. 2020. “Comparative durability of GFRP composite reinforcing bars in concrete and in simulated concrete environments.” Cem. Concr. Compos. 109 (May): 103564. https://doi.org/10.1016/j.cemconcomp.2020.103564.
Micelli, F., and A. Nanni. 2004. “Durability of FRP rods for concrete structures.” Constr. Build. Mater. 18 (7): 491–503. https://doi.org/10.1016/j.conbuildmat.2004.04.012.
Montaigu, M., M. Robert, E. A. Ahmed, and B. Benmokrane. 2013. “Laboratory characterization and evaluation of durability performance of new polyester and vinylester E-glass GFRP dowels for jointed concrete pavement.” J. Compos. Constr. 17 (2): 176–187. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000317.
Morales, C. N., G. Claure, A. R. Emparanza, and A. Nanni. 2021. “Durability of GFRP reinforcing bars in seawater concrete.” Constr. Build. Mater. 270 (Feb): 121492. https://doi.org/10.1016/j.conbuildmat.2020.121492.
Pan, Y. F., and D. M. Yan. 2021. “Study on the durability of GFRP bars and carbon/glass hybrid fiber reinforced polymer (HFRP) bars aged in alkaline solution.” Compos. Struct. 261 (Apr): 113285. https://doi.org/10.1016/j.compstruct.2020.113285.
Rolland, A., K. Benzarti, M. Quiertant, and S. Chataigner. 2021. “Accelerated aging behavior in alkaline environments of GFRP reinforced bars and their bond with concrete.” Materials 14 (19): 5700. https://doi.org/10.3390/ma14195700.
Sawpan, M. A. 2016. “Effects of alkaline conditioning and temperature on the properties of glass fiber polymer composite rebar.” Polym. Compos. 37 (11): 3181–3190. https://doi.org/10.1002/pc.23516.
Sawpan, M. A., A. A. Mamun, and P. G. Holdsworth. 2014. “Long term durability of pultruded polymer composite rebar in concrete environment.” Mater. Des. 57 (May): 616–624. https://doi.org/10.1016/j.matdes.2014.01.049.
Starkova, O., K. Aniskevich, and J. Sevcenko. 2021. “Long-term moisture absorption and durability of FRP pultruded rebars.” Mater. Today: Proc. 34 (Jan): 36–40. https://doi.org/10.1016/j.matpr.2019.12.154.
Wang, Z. K., X. L. Zhao, G. J. Xian, G. Wu, P. K. S. Raman, and S. Al-Saadi. 2017. “Durability study on interlaminar shear behavior of basalt-, glass-, and carbon-fiber reinforced polymer (B/G/CFRP) bars in seawater sea sand concrete environment.” Constr. Build. Mater. 156 (Dec): 985–1004. https://doi.org/10.1016/j.conbuildmat.2017.09.045.
Won, J. P., and C. G. Park. 2006. “Effect of environment exposure on the mechanical and bonding properties of hybrid FRP reinforcing bars for concrete structures.” J. Compos. Mater. 40 (12): 1063. https://doi.org/10.1177/0021998305057362.
Yi, Y., S. C. Guo, S. Li, M. Z. Rahman, L. L. Zhou, C. J. Shi, and D. J. Zhu. 2021. “Effect of alkalinity on the shear performance degradation of basalt fiber-reinforced polymer bars in simulated seawater sea sand concrete environment.” Constr. Build. Mater. 299 (Sep): 123957. https://doi.org/10.1016/j.conbuildmat.2021.123957.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Aug 8, 2022
Accepted: Dec 23, 2022
Published online: May 25, 2023
Published in print: Aug 1, 2023
Discussion open until: Oct 25, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.