Closure to “Effect of Relative Density and Particle Morphology on the Bearing Capacity and Collapse Mechanism of Strip Footings in Sand”
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 150, Issue 8
Get full access to this article
View all available purchase options and get full access to this article.
References
Aiban, S. A., and D. Znidarcic. 1995. “Centrifugal modeling of bearing capacity of shallow foundations on sands.” J. Geotech. Eng. 121 (10): 704–712. https://doi.org/10.1061/(ASCE)0733-9410(1995)121:10(704).
Bolton, M. D. 1986. “The strength and dilatancy of sands.” Géotechnique 36 (1): 65–78. https://doi.org/10.1680/geot.1986.36.1.65.
Chakraborty, T., and R. Salgado. 2010. “Dilatancy and shear strength of sand at low confining pressures.” J. Geotech. Geoenviron. Eng. 136 (3): 527–532. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000237.
Janabi, F. H., R. A. Raja, V. A. Sakleshpur, M. Prezzi, and R. Salgado. 2023. “Experimental study of shape and depth factors and deformations of footings in sand.” J. Geotech. Geoenviron. Eng. 149 (2): 04022128. https://doi.org/10.1061/JGGEFK.GTENG-10874.
Janabi, F. H., V. A. Sakleshpur, M. Prezzi, and R. Salgado. 2022. “Strain influence diagrams for settlement estimation of square footings on layered sand.” J. Geotech. Geoenviron. Eng. 148 (5): 04022025. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002770.
Lee, J., J. Eun, M. Prezzi, and R. Salgado. 2008. “Strain influence diagrams for settlement estimation of both isolated and multiple footings in sand.” J. Geotech. Geoenviron. Eng. 134 (4): 417–427. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:4(417).
Lee, J., and R. Salgado. 2002. “Estimation of footing settlement in sand.” Int. J. Geomech. 2 (1): 1–28. https://doi.org/10.1061/(ASCE)1532-3641(2002)2:1(1).
Loukidis, D., and R. Salgado. 2009. “Bearing capacity of strip and circular footings in sand using finite elements.” Comput. Geotech. 36 (5): 871–879. https://doi.org/10.1016/j.compgeo.2009.01.012.
Loukidis, D., and R. Salgado. 2011. “Effect of relative density and stress level on the bearing capacity of footings on sand.” Géotechnique 61 (2): 107–119. https://doi.org/10.1680/geot.8.P.150.3771.
Martin, C. M. 2005. “Exact bearing capacity calculations using the method of characteristics.” In Vol. 4 of Proc., 11th Int. Conf. on Computer Methods and Advances in Geomechanics, 441–450. Bologna, Italy: Patron Editore.
Mitchell, J. K., and K. Soga. 2005. Fundamentals of soil behavior. 3rd ed. Englewood, NJ: Wiley.
Pradhan, T. B. S., F. Tatsuoka, and N. Horii. 1988. “Strength and deformation characteristics of sand in torsional simple shear.” Soils Found. 28 (3): 131–148. https://doi.org/10.3208/sandf1972.28.3_131.
Raja, R. A., V. A. Sakleshpur, M. Prezzi, and R. Salgado. 2023. “Load response and soil displacement field for a vertically loaded strip footing on sand underlain by a stiff base.” J. Geotech. Geoenviron. Eng. 149 (11): 04023106. https://doi.org/10.1061/JGGEFK.GTENG-11378.
Raja, R. A., V. A. Sakleshpur, M. Prezzi, and R. Salgado. 2024. “Effect of footing geometry and embedment on the bearing capacity and collapse mechanism of shallow foundations in sand.” J. Geotech. Geoenviron. Eng. 150 (6): 04024042. https://doi.org/10.1061/JGGEFK.GTENG-11802.
Sakleshpur, V. A., M. Prezzi, and R. Salgado. 2022. “Validation of CPT-based methods for estimation of footing settlement in sand.” In Cone penetration testing 2022, 1089–1094. 1st ed. London: CRC Press. https://doi.org/10.1201/9781003308829-165.
Sakleshpur, V. A., M. Prezzi, R. Salgado, and M. Zaheer. 2021a. CPT-based geotechnical design manual, volume 2: CPT-based design of foundations (methods). West Lafayette, IN: Purdue Univ.
Sakleshpur, V. A., M. Prezzi, R. Salgado, and M. Zaheer. 2021b. CPT-based geotechnical design manual, volume 3: CPT-based design of foundations (example problems). West Lafayette, IN: Purdue Univ.
Salgado, R. 2020. “Forks in the road: Rethinking modeling decisions that defined the teaching and practice of geotechnical engineering.” In Proc., Int. Conf. on Geotechnical Engineering Education 2020 (GEE2020), 1–17. London: International Society for Soil Mechanics and Geotechnical Engineering.
Salgado, R. 2022. The engineering of foundations, slopes, and retaining structures. 2nd ed. Boca Raton, FL: CRC Press.
Salgado, R. 2024. “Forks in the road: Decisions that have shaped and will shape the teaching and practice of geotechnical engineering.” Soils Rocks 47 (2): e2024010123. https://doi.org/10.28927/SR.2024.010123.
Sutherland, H. B., and M. S. Mesdary. 1969. “The influence of the intermediate principal stress on the strength of sand.” In Vol. 1 of Proc., 7th Int. Conf. on Soil Mechanics and Foundation Engineering (ICSMFE), 391–399. Mexico City: Sociedad Mexicana de Mecanica.
Tatsuoka, F. 1987. “Discussion on ‘The strength and dilatancy of sands’ by Bolton, 1986.” Géotechnique 37 (2): 219–226. https://doi.org/10.1680/geot.1987.37.2.219.
Tatsuoka, F., M. Okahara, T. Tanaka, K. Tani, T. Morimoto, and M. S. A. Siddiquee. 1991. “Progressive failure and particle size effect in bearing capacity of footing on sand.” In Proc., Geotechnical Engineering Congress, 788–802. Reston, VA: ASCE.
Yin, J.-H., Y.-J. Wang, and A. P. S. Selvadurai. 2001. “Influence of nonassociativity on the bearing capacity of a strip footing.” J. Geotech. Geoenviron. Eng. 127 (11): 985–989. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:11(985).
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Feb 7, 2024
Accepted: Feb 20, 2024
Published online: May 31, 2024
Published in print: Aug 1, 2024
Discussion open until: Oct 31, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.