A Novel Method for Integrity Assessment of Soil-Nailing Works with Actively Heated Fiber-Optic Sensors
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 150, Issue 8
Abstract
Soil nailing has become a common method for improving slope stability due to its cost-effectiveness and easy installation. However, concerns have been arisen regarding the quality and integrity of soil nailing works. This study proposed a novel method for soil nail integrity assessment using an actively heated fiber-optic (AHFO) sensor. First, numerical simulations were conducted to determine the thermal conductivity profiles of soil nails with various defects, measured using AHFO. By establishing the relationship between defects and thermal conductivity profiles, the material and severity of soil nail defects can be estimated. It was found that the thermal conductivity profiles obtained by the AHFO sensor accurately correspond to defect locations, and the entrained material and severity of defects in the section can be identified for defects with a length exceeding 0.1 m. Physical model tests were performed to further validate the feasibility of the proposed quantitative soil nail integrity testing method. This paper also provides recommendations for heating parameters and testing processes to facilitate the implementation of this method by potential users.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All experimental data and numerical results that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The Open Research Project Programme of the State Key Laboratory of Internet of Things for Smart City, University of Macau [Ref. No. SKL-IoTSC (UM)-2021-2023/ORPF/A19/2022] and the General Research Fund project (No. 15214722) from Research Grants Council of Hong Kong Special Administrative Region Government of China are gratefully acknowledged. The authors also acknowledge the financial support from grants (BD88) from The Hong Kong Polytechnic University.
References
ACI (American Concrete Institute). 1998. Nondestructive test methods for evaluation of concrete in structures. ACI 228.2R-98. Farmington Hills, MI: ACI.
Bao, X., and Y. Wang. 2021. “Recent advancements in Rayleigh scattering-based distributed fiber sensors.” Adv. Devices Instrum. https://doi.org/10.34133/2021/8696571.
Benmokrane, B., and G. Ballivy. 1991. “Five-year monitoring of load losses on prestressed cement-grouted rock anchors.” Can. Geotech. J. 28 (5): 668–677. https://doi.org/10.1139/t91-081.
Campbell, G. S., C. Calissendorff, and J. H. Williams. 1991. “Probe for measuring soil specific heat using a heat-pulse method.” Soil Sci. Soc. Am. J. 55 (1): 291–293. https://doi.org/10.2136/sssaj1991.03615995005500010052x.
Cao, D. F., B. Shi, H. H. Zhu, H. I. Inyang, G. Q. Wei, and C. Z. Duan. 2018. “A soil moisture estimation method using actively heated fiber Bragg grating sensors.” Eng. Geol. 242 (Aug): 142–149. https://doi.org/10.1016/j.enggeo.2018.05.024.
Cao, D. F., H.-H. Zhu, B. Wu, J. C. Wang, and S. K. Shukla. 2021. “Investigating temperature and moisture profiles of seasonally frozen soil under different land covers using actively heated fiber Bragg grating sensors.” Eng. Geol. 290 (Sep): 106197. https://doi.org/10.1016/j.enggeo.2021.106197.
Carslaw, H. S., and J. C. Jaeger. 1959. Conduction of heat in solids. London: Oxford University Press.
Chan, R. K. S. 2008. Geoguide 7: Guide to soil nail design and construction. Hong Kong: Geotechnical Engineering Office.
Chen, Z. S., J. Qian, and Y. H. Ye. 1992. “Theoretical derivation of equivalent thermal conductivity of composite materials.” J. Univ. Sci. Technol. China 22 (4): 416–424.
Cheung, R. W. M., and D. O. K. Lo. 2011. “Use of time-domain reflectometry for quality control of soil nailing works.” J. Geotech. Geoenviron. Eng. 137 (12): 1222–1235. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000549.
Chung, C. C., C. P. Lin, Y. J. Ngui, K. Wang, and C. H. Lin. 2016. “Laboratory evaluation of soil-nailing quality inspection by an improved TDR method.” J. Geoeng. 11 (3): 143–149. https://doi.org/10.6310/jog.2016.11(3).4.
Chung, C. C., C. P. Lin, K. Wang, C. S. Lin, and Y. J. Ngui. 2015. “Improved TDR method for quality control of soil-nailing works.” J. Geotech. Geoenviron. Eng. 142 (1): 06015011. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001372.
Ciocca, F., I. Lunati, N. Van de Giesen, and M. B. Parlange. 2012. “Heated optical fiber for distributed soil-moisture measurements: A lysimeter experiment.” Vadose Zone J. 11 (4): 1–10. https://doi.org/10.2136/vzj2011.0199.
Ding, Z., X. S. Yao, T. Liu, Y. Du, K. Liu, Q. Han, Z. Meng, and H. Chen. 2012. “Long-range vibration sensor based on correlation analysis of optical frequency-domain reflectometry signals.” Opt. Express 20 (27): 28319–28329. https://doi.org/10.1364/OE.20.028319.
FHWA. 2003. Geotechnical engineering circular No.7 soil nail walls. Washington, DC: FHWA.
Gong, J., P. W. Jayawickrama, and Y. Tinkey. 2006. “Nondestructive evaluation of installed soil nails.” Transp. Res. Rec. 1976 (1): 104–113.
Hearne, T. M., K. H. Stokoe, and L. C. Reese. 1981. “Drilled-shaft integrity by wave propagation method.” J. Geotech. Eng. 107 (10): 1327–1344. https://doi.org/10.1061/AJGEB6.0001192.
ISO. 2009. Cement-test methods-determination of strength. ISO 679: 2009. Geneva: ISO.
Jayawickrama, P. W., Y. Tinkey, J. Gong, and J. Turner. 2007. Non-destructive evaluation of installed soil nails. Fort Lubbock, TX: Texas DOT.
Jayawickrama, P. W., and J. B. Turner. 2013. “Influence of grout rheology and placement technique on integrity of soil nails.” In Proc., Geo-Congress 2013, 1774–1783. Reston, VA: ASCE. https://doi.org/10.1061/9780784412787.177.
Johansen, O. 1975. Thermal conductivity of soils. Fort Belvoir, VA: Defense Technical Information Center.
Juran, I., B. K. F. Gerge, and V. Elias. 1990. “Design of soil nailed retaining structures, design and performance of earth retaining structures.” J. Geotech. Eng. 116 (1): 54–72. https://doi.org/10.1061/(ASCE)0733-9410(1990)116:1(54).
Kim, K. H., J. S. Lee, N. Y. Kim, and J. D. Yu. 2015. “Application of non-destructive method for evaluation of soil nail length.” J. Korean Tunnelling Underground Space Assoc. 17 (2): 75–90. https://doi.org/10.9711/KTAJ.2015.17.2.075.
Latiff, K. A. A., A. N. Rizalman, N. S. H. Harith, S. Razak, and M. E. Mohamad. 2020. “3D Numerical modelling on the thermal performance of reinforced concrete encased wide-flanged steel column.” In Vol. 476 of Proc., IOP Conf. Series: Earth and Environmental Science, 012057. Bristol, UK: IOP Publishing.
Lee, J. S., and J. D. Yu. 2019. “Nondestructive method for evaluating grouted ratio of soil nail using electromagnetic wave.” J. Nondestruct. Eval. 38 (Jun): 1–15. https://doi.org/10.1007/s10921-019-0582-9.
Lee, S. J., K. Y. Kim, J. C. Choi, and T. H. Kwonet. 2016. “Experimental investigation on the variation of thermal conductivity of soils with effective stress, porosity, and water saturation.” Geomech. Eng. 11 (6): 771–785. https://doi.org/10.12989/gae.2016.11.6.771.
Li, H. J., H. H. Zhu, D. Y. Tan, B. Shi, and J. H. Yin. 2023. “Detecting pipeline leakage using active distributed temperature Sensing: Theoretical modeling and experimental verification.” Tunnelling Underground Space Technol. 135 (May): 105065. https://doi.org/10.1016/j.tust.2023.105065.
Liao, S. T., C. K. Huang, and C. Y. Wang. 2008. “Sonic echo and impulse response tests for length evaluation of soil nails in various bonding mediums.” Can. Geotech. J. 45 (7): 1025–1035. https://doi.org/10.1139/T08-034.
Lin, P., J. Li, T. C. Kim, and J. Liu. 2013. “Experimental investigation of ultrasonic non-destructive testing of soil nails.” In Vol. 4 of Proc., Annual Conf.—Canadian Society for Civil Engineering, 2838–2846. Cham, Switzerland: Springer.
Lin, P. Y., and R. J. Bathurst. 2019. “Calibration of resistance factors for load and resistance factor design of internal limit states of soil nail walls.” J. Geotech. Geoenviron. Eng. 145 (1): 04018100. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002005.
Lin, S., D. Tan, Y. Leung, J. Yin, I. Li, H. Sze, L. Lo, H. Kan, C. Wong, and Y. Chan. 2023. “Fibre optic monitoring of a twin-circular shaft excavation: Developments of circumferential forces and bending moments in diaphragm wall.” J. Geotech. Geoenviron. Eng. 149 (12): 04023117. https://doi.org/10.1061/JGGEFK.GTENG-11211.
Liu, J., D. Y. Zhang, P. Lin, Z. Cai, and X. Rong. 2014. Ultrasonic non-destructive testing of soil nails. Toronto: Ontario Centers of Excellence and DYWIDAG Systems International.
Liu, X.-F., H.-H. Zhu, B. Wu, J. Li, T.-X. Liu, and B. Shi. 2023. “Artificial intelligence-based fiber optic sensing for soil moisture measurement with different cover conditions.” Measurement 206 (Jan): 112312. https://doi.org/10.1016/j.measurement.2022.112312.
Liu, Y. L., H. Ding, K. B. Wang, H. L. Xiao, and L. H. Li. 2020. “Thermal conduction characteristics of DTS when detecting the integrity of cast-in-place piles considering their environment.” Heat Mass Transfer 56 (7): 2185–2202. https://doi.org/10.1007/s00231-020-02848-3.
Moradi, M., A. P. Babaki, and M. Sabermahani. 2020. “Effect of nail arrangement on the behavior of convex corner soil nailed walls.” J. Geotech. Geoenviron. Eng. 146 (5): 04020026. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002235.
Porterfield, J. A., D. M. Cotton, and R. J. Byrne. 1994. Soil nailing field inspectors manual. Washington, DC: FHWA.
Ratke, L., and P. Gurikov. 2021. “Thermal properties.” In The chemistry and physics of aerogels. Cambridge, UK: Cambridge University Press.
Salloum, T., G. Pernica, R. Glazer, and K. T. Law. 2003. “Using the impulse response technique to estimate the length of in situ soil nails.” In Vol. 1 of Proc., 56th Canadian Geotechnical Conf., 1–9. Ottawa: National Research Council Canada.
Sayde, C., C. Gregory, M. Gil-Rodriguez, N. Tufillaro, S. Tyler, N. van de Giesen, M. English, R. Cuenca, and J. S. Selker. 2010. “Feasibility of soil moisture monitoring with heated fiber optics.” Water Resour. Res. 46 (6): 06201. https://doi.org/10.1029/2009wr007846.
Seo, H. J., L. Pelecanos, Y. S. Kwon, and I. M. Lee. 2017. “Net load– displacement estimation in soil-nail pullout tests.” Proc. Inst. Civ. Eng. Geotech. Eng. 170 (6): 534–547. https://doi.org/10.1680/jgeen.16.00185.
Shafigh, P., I. Asadi, A. R. Akhiani, N. B. Mahyuddin, and M. Hashemi. 2020. “Thermal properties of cement mortar with different mix proportions.” Mater. Constr. 70 (339): 224. https://doi.org/10.3989/mc.2020.09219.
Steinbach, J., and E. Vey. 1978. “Caisson evaluation by stress wave propagation method.” J. Geotech. Eng. 100 (4): 361–378. https://doi.org/10.1061/AJGEB6.0000161.
Striegl, A. M., and S. P. Loheide II. 2012. “Heated distributed temperature sensing for field scale soil moisture monitoring.” Ground Water 50 (3): 340–347. https://doi.org/10.1111/j.1745-6584.2012.00928.x.
Su, L. J., T. C. F. Chan, J. H. Yin, Y. K. Shiu, and S. L. Chiu. 2008. “Influence of over burden pressure on soil–nail pullout resistance in a compacted fill.” J. Geotech. Geoenviron. Eng. 134 (9): 1339–1347. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:9(1339).
Wang, D. Y., H.-H. Zhu, J. Wang, Y.-J. Sun, L. Schenato, A. Pasuto, and B. Shi. 2023a. “Characterization of sliding surface deformation and stability evaluation of landslides with fiber–optic strain sensing nerves.” Eng. Geol. 314 (Mar): 107011. https://doi.org/10.1016/j.enggeo.2023.107011.
Wang, J., H. H. Zhu, D. Y. Tan, Z. L. Li, J. Li, C. Wei, and B. Shi. 2023b. “Thermal integrity profiling of cast-in-situ piles in sand using fiber-optic distributed temperature sensing.” J. Rock Mech. Geotech. Eng. 15 (12): 3244–3255. https://doi.org/10.1016/j.jrmge.2023.02.028.
Weiss, J. D. 2003. “Using fiber optics to detect moisture intrusion into a landfill cap consisting of a vegetative soil barrier.” J. Air Waste Manage. Assoc. 53 (9): 1130–1148. https://doi.org/10.1080/10473289.2003.10466268.
Wu, B., H. H. Zhu, D. F. Cao, X. F. Liu, and T. X. Liu. 2023. “Fiber optic sensing-based field investigation of thermo-hydraulic behaviors of loess for characterizing land–atmosphere interactions.” Eng. Geol. 315 (Mar): 107019. https://doi.org/10.1016/j.enggeo.2023.107019.
Wu, B., H. H. Zhu, D. F. Cao, L. Xu, and B. Shi. 2021. “Feasibility study on ice content measurement of frozen soil using actively heated FBG sensors.” Cold Reg. Sci. Technol. 189 (Sep): 103332. https://doi.org/10.1016/j.coldregions.2021.103332.
Ye, X., H. H. Zhu, J. Wang, Q. Zhang, B. Shi, L. Schenato, and A. Pasuto. 2022. “Subsurface multi-physical monitoring of a reservoir landslide with the fiber-optic nerve system.” Geophys. Res. Lett. 49 (11): e2022GL098211. https://doi.org/10.1029/2022GL098211.
Ye, X. Y., S. Y. Wang, Q. Li, S. Zhang, and D. C. Sheng. 2020. “The negative effect of installation on the performance of a compaction-grouted soil nail in poorly graded Stockton Beach Sand.” J. Geotech. Geoenviron. Eng. 146 (8): 04020061. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002301.
Yin, J. H., and W. H. Zhou. 2009. “Influence of grouting pressure and overburden stress on the interface resistance of a soil nail.” J. Geotech. Geoenviron. Eng. 135 (9): 1198–1208. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000045.
Yu, J. D., K. H. Kim, and J. S. Lee. 2018a. “Nondestructive health monitoring of soil nails using electromagnetic wave.” Can. Geotech. J. 55 (1): 79–89. https://doi.org/10.1139/cgj-2017-0043.
Yu, J. D., N. Y. Kim, and J. S. Lee. 2018b. “Nondestructive integrity evaluation of soil nails using longitudinal waves.” J. Geotech. Geoenviron. Eng. 144 (11): 04018080. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001976.
Zhang, C., and Q. Sun. 2019. “Gaussian approximation potential for studying the thermal conductivity of silicone.” J. Appl. Phys. 126 (10): 105103. https://doi.org/10.1063/1.5119281.
Zhang, C.-C., H.-H. Zhu, Q. Xu, B. Shi, and G.-X. Mei. 2015. “Time-dependent pullout behavior of GFRP soil nail in sand.” Can. Geotech. J. 52 (6): 671–681. https://doi.org/10.1139/cgj-2013-0381.
Zhang, L. L., L. M. Zhang, and W. H. Tang. 2009. “Uncertainties of field pullout resistance of soil nails.” J. Geotech. Geoenviron. Eng. 135 (7): 966–972. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000014.
Zhu, H. H., B. Shi, J. F. Yan, J. Zhang, and J. Wang. 2015. “Investigation of the evolutionary process of a reinforced model slope using a fiber-optic monitoring network.” Eng. Geol. 186 (Feb): 34–43. https://doi.org/10.1016/j.enggeo.2014.10.012.
Zhu, H. H., J. C. Wang, N. G. Reddy, A. Garg, D. Cao, X. Liu, and B. Shi. 2022. “Monitoring water infiltration of capillary barrier with actively heated fibre bragg gratings.” Environ. Geotech. 40 (2022): 1–16. https://doi.org/10.1680/jenge.21.00130.
Zhu, H.-H., J.-H. Yin, A. T. Yeung, and W. Jin. 2011. “Field pullout testing and performance evaluation of GFRP soil nails.” J. Geotech. Geoenviron. Eng. 137 (7): 633–642. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000457.
Zubelzu, S., L. Rodriguez-Sinobas, A. Saa-Requejo, J. Benitez, and A. M. Tarquis. 2019. “Assessing soil water content variability through active heat distributed fiber optic temperature sensing.” Agric. Water Manage. 212 (Feb): 193–202. https://doi.org/10.1016/j.agwat.2018.08.008.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Mar 23, 2023
Accepted: Mar 1, 2024
Published online: Jun 4, 2024
Published in print: Aug 1, 2024
Discussion open until: Nov 4, 2024
ASCE Technical Topics:
- Defects and imperfections
- Engineering fundamentals
- Engineering mechanics
- Equipment and machinery
- Geomechanics
- Geotechnical engineering
- Materials characterization
- Materials engineering
- Models (by type)
- Numerical models
- Probe instruments
- Retaining structures
- Soil dynamics
- Soil mechanics
- Soil nailing
- Soil stabilization
- Soil tests
- Tests (by type)
- Thermal properties
- Thermodynamics
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.