A Finite-Strain Simulation of 3D Printed Airless Tires
Publication: Journal of Engineering Mechanics
Volume 149, Issue 10
Abstract
The aim of this paper is to explore the mechanical characteristics of lattice-based airless tires made by three-dimensional (3D) printing technology under a large-deformation regime. The proposed airless tires are designed and fabricated based on the hexagonal lattice geometries under two different orientations. Experimental tests are conducted to investigate the effects of geometrical parameters and the types of lattices on the radial responses of airless tires. A finite-strain beam element is also established to simulate airless tires under various loading states, including radial, longitudinal, torsional, slipping, and rolling conditions. In this respect, a finite-element formulation is developed based on finite-strain hyperelasticity and solved by implementing an iterative Newton–Raphson scheme. Numerical and experimental results confirm that the proposed finite-strain beam element can be used for the analysis of airless tires with complicated lattice geometries under various nonlinearities, such as geometrical, material, and contact phenomenon. The numerical illustrations emphasize the effects of geometrical parameters of lattices and loading parameters on the behavior and mechanical properties of airless tires. The effects of lattice orientations, thickness, number of unit cells, and the coefficient of Coulomb friction between the tire and the ground, as well as loading direction, are investigated. Their implications on the responses of the airless tires with the same weight are highlighted, and pertinent conclusions are outlined. It is also shown that the proposed mathematical model can be used in future efforts for analysis, optimization, and design of lattice-based airless tires with complex geometries.
Practical Applications
This paper is a numerical/experimental research of the 3D printed lattice-based airless tires under various real loading cases such as radial, longitudinal, torsional, slipping, and rolling conditions. The proposed airless tires are designed/fabricated based on two different orientations of hexagonal lattice geometries. The material used for modeling and fabrication of these airless tires is rubber-like materials (hyperelastic), which can have many reversible deformations. The results show that under real loading conditions, the links of the lattice experience instabilities, such as buckling and snap. It should be mentioned that these instabilities are quite important in practical applications that are investigated in the present work in detail. Moreover, the behavior of lattice-based airless tires under each loading condition is divided into linear behavior and nonlinear behavior. Linear behavior of an airless tire can be predicted by the present model for different geometrical parameters (such as length, thickness, among others). Unlike linear behavior, nonlinear behavior highly depends on load and deformation histories. Therefore, each case needs the optimization and design of lattice-based airless tires.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some models or codes that support the findings of this study are available from the corresponding author upon reasonable request (such as debate, teaching, research, etc.). On the other hand, some data, models, and code generated or used during the study appear in the published article.
References
Aboul-Yazid, A. M., M. A. A. Emam, S. Shaaban, and M. A. El-Nashar. 2015. “Effect of spokes structures on characteristics performance of non-pneumatic tires.” Int. J. Autom. Mech. Eng. 11 (1): 185. https://doi.org/10.15282/ijame.11.2015.4.0185.
Ahmadi, S. M., G. Campoli, S. Amin Yavari, B. Sajadi, R. Wauthle, J. Schrooten, H. Weinans, and A. A. Zadpoor. 2014. “Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells.” J. Mech. Behav. Biomed. Mater. 34 (Jun): 106–115. https://doi.org/10.1016/j.jmbbm.2014.02.003.
Ai, L., and X. L. Gao. 2017. “Metamaterials with negative Poisson’s ratio and non-positive thermal expansion.” Compos. Struct. 162 (Feb): 70–84. https://doi.org/10.1016/j.compstruct.2016.11.056.
Ajdari, A., J. P. Babak Haghpanah Jahromi, H. Nayeb-Hashemi, and A. Vaziri. 2012. “Hierarchical honeycombs with tailorable properties.” Int. J. Solids Struct. 49 (11–12): 1413–1419. https://doi.org/10.1016/j.ijsolstr.2012.02.029.
Baertsch, F., A. Ameli, and T. Mayer. 2021. “Finite-element modeling and optimization of 3D-printed auxetic reentrant structures with stiffness gradient under low-velocity impact.” J. Eng. Mech. 147 (7): 04021036. https://doi.org/10.1061/(asce)em.1943-7889.0001923.
Bodaghi, M., A. R. Damanpack, G. F. Hu, and W. H. Liao. 2017. “Large deformations of soft metamaterials fabricated by 3D printing.” Mater. Des. 131 (Oct): 81–91. https://doi.org/10.1016/j.matdes.2017.06.002.
Bodaghi, M., A. Serjouei, A. Zolfagharian, M. Fotouhi, H. Rahman, and D. Durand. 2020. “Reversible energy absorbing meta-sandwiches by FDM 4D printing.” Int. J. Mech. Sci. 173 (May): 105451. https://doi.org/10.1016/j.ijmecsci.2020.105451.
Damanpack, A. R., M. Bodaghi, and W. H. Liao. 2017. “A robust hyper-elastic beam model under bi-axial normal-shear loadings.” Int. J. Non-Linear Mech. 95 (Oct): 287–295. https://doi.org/10.1016/j.ijnonlinmec.2017.07.001.
Damanpack, A. R., M. Bodaghi, and W. H. Liao. 2019. “Experimentally validated multi-scale modeling of 3D printed hyper-elastic lattices.” Int. J. Non-Linear Mech. 108 (Jan): 87–110. https://doi.org/10.1016/j.ijnonlinmec.2018.10.008.
Damanpack, A. R., M. Bodaghi, and W. H. Liao. 2020. “Contact/impact modeling and analysis of 4D printed shape memory polymer beams.” Smart Mater. Struct. 29 (8): 085016. https://doi.org/10.1088/1361-665X/ab883a.
Dudziak, M., A. Lewandowski, and K. J. Waluś. 2020. “Static tests the stiffness of car tires.” In Proc., IOP Conf. Series: Materials Science and Engineering, 1–8. Bristol, UK: IOP Publishing.
El Nady, K., F. Dos Reis, and J. F. Ganghoffer. 2017. “Computation of the homogenized nonlinear elastic response of 2D and 3D auxetic structures based on micropolar continuum models.” Compos. Struct. 170 (Jun): 271–290. https://doi.org/10.1016/j.compstruct.2017.02.043.
ElNady, K., I. Goda, and J. François Ganghoffer. 2016. “Computation of the effective nonlinear mechanical response of lattice materials considering geometrical nonlinearities.” Comput. Mech. 58 (6): 957–979. https://doi.org/10.1007/s00466-016-1326-7.
Ganghoffer, J. F., I. Goda, A. A. Novotny, R. Rahouadj, and J. Sokolowski. 2018. “Homogenized couple stress model of optimal auxetic microstructures computed by topology optimization.” ZAMM 98 (5): 696–717. https://doi.org/10.1002/zamm.201700154.
Gorguluarslan, R. M., U. N. Gandhi, R. Mandapati, and S. K. Choi. 2016. “Design and fabrication of periodic lattice-based cellular structures.” Comput. Aided Des. Appl. 13 (1): 50–62. https://doi.org/10.1080/16864360.2015.1059194.
Jin, X., X. F. Cheng Hou, J. L. Yongle Sun, and C. Lu. 2018. “Investigation on the static and dynamic behaviors of non-pneumatic tires with honeycomb spokes.” Compos. Struct. 187 (Mar): 27–35. https://doi.org/10.1016/j.compstruct.2017.12.044.
Kucewicz, M., P. Baranowski, and J. Małachowski. 2017. “Airless tire conceptions modeling and simulations.” Lect. Notes Mech. Eng. 2017 (1): 293–301. https://doi.org/10.1007/978-3-319-50938-9_30.
Mousanezhad, D., H. Ebrahimi, B. Haghpanah, R. Ghosh, A. Ajdari, A. M. S. Hamouda, and A. Vaziri. 2015. “Spiderweb honeycombs.” Int. J. Solids Struct. 66 (Aug): 218–227. https://doi.org/10.1016/j.ijsolstr.2015.03.036.
Muhr, A. H. 2005. “Modeling the stress-strain behavior of rubber.” Rubber Chem. Technol. 78 (3): 391–425. https://doi.org/10.5254/1.3547890.
Mustapha, K. B., and K. Mohamed Metwalli. 2021. “A review of fused deposition modelling for 3D printing of smart polymeric materials and composites.” Eur. Polym. J. 156 (Aug): 110591.
Pascon, J. P., and H. B. Coda. 2013. “High-order tetrahedral finite elements applied to large deformation analysis of functionally graded rubber-like materials.” Appl. Math. Modell. 37 (20–21): 8757–8775. https://doi.org/10.1016/j.apm.2013.03.062.
Phromjan, J., and C. Suvanjumrat. 2021. “Optimized stress-strain ranges for hyperelastic constitutive models supporting the simulation of vertical stiffness on airless tire.” In Proc., IOP Conf. Series: Materials Science and Engineering, 1–6. Bristol, UK: IOP Publishing.
Reddy, J. N. 2015. An introduction to nonlinear finite element analysis. 2nd ed. Oxford, UK: Oxford University Press.
Rezaei, S., R. H. Javad Kadkhodapour, B. Taherkhani, A. Pourkamali Anaraki, and S. Dariushi. 2021. “Design and modeling of the 2D auxetic metamaterials with hyperelastic properties using topology optimization approach.” Photonics Nanostruct. Fundam. Appl. 43 (Jun): 100868. https://doi.org/10.1016/j.photonics.2020.100868.
Steinmann, P., M. Hossain, and G. Possart. 2012. “Hyperelastic models for rubber-like materials: Consistent tangent operators and suitability for Treloar’s data.” Arch. Appl. Mech. 82 (9): 610–625. https://doi.org/10.1007/s00419-012-0610-z.
Sun, P., S. Z. Guanyong Feng, C. Qiu, and J. Fan. 2019. “Experimental analysis of radial tire stiffness and grounding characteristics.” In Proc., IOP Conf. Series: Materials Science and Engineering, 1–15. Bristol, UK: IOP Publishing.
Suvanjumrat, C., R. Rugsaj, and J. Phromjan. 2021. “Comparison of two different surface for rolling airless tire by finite element method.” In Proc., IOP Conf. Series: Materials Science and Engineering, 1–7. Bristol, UK: IOP Publishing.
Tao, W., and M. C. Leu. 2016. “Design of lattice structure for additive manufacturing.” In Proc., Int. Symp. on Flexible Automation, 1–8. New York: IEEE.
Zhang, J., Z. W. Guoxing Lu, D. Ruan, A. Alomarah, and Y. Durandet. 2018. “Large deformation of an auxetic structure in tension: Experiments and finite element analysis.” Compos. Struct. 184 (Jun): 76–82. https://doi.org/10.1016/j.compstruct.2017.09.076.
Zienkiewicz, O. C., R. L. Taylor, and David Fox. 2013. The finite element method for solid and structural mechanics. 7th ed. Oxford, UK: Butterscotch-Heinemann.
Zmuda, M., J. Jackowski, and Z. Hryciów. 2019. “Numerical research of selected features of the non-pneumatic tire.” In Proc., AIP Conf., 1–9. Melville, NY: AIP Publishing LLC.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jan 13, 2023
Accepted: May 6, 2023
Published online: Jul 25, 2023
Published in print: Oct 1, 2023
Discussion open until: Dec 25, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.