Eigenmodes Solution and Analysis of Combined Structures Using Improved Coupling Energies
Publication: Journal of Engineering Mechanics
Volume 149, Issue 5
Abstract
In this paper, improved coupling energies are developed for the vibration analysis of combined structures having coordinate systems in different directions. The in-plane and transverse vibration displacements for the combined structures are expanded as improved Fourier series to ensure the continuity and smoothness of the series representation in the solution domain. The energy principle is adopted to solve the eigenmodes of various combined structures, including the open box coupled structure and enclosed box-type coupled structure. The eigenmodes of the enclosed box-type structure, three-plate coupled structure, and four-plate coupled structure are compared with ones obtained from FEM, and good agreement is observed. The validations of the eigenmodes for the combined structures connected at an arbitrary included angle are analyzed in numerical analysis. The influence of the modal characteristics of the open box structures composed of five plates are studied for different boundary conditions.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or source code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors gratefully acknowledge the financial support from the National Natural Science Foundation of China (Nos. 51705071, 51822902, and 51475088), the Natural Science Foundation of Jilin Province of China (Grant Nos. 20190103058JH, 20190201109JC, and 20140101065JC), and the Research Foundation of Education Department of Jilin Province, China (No. JJKH20220104KJ).
References
Bercin, A. N. 1997. “Eigenfrequencies of rectangular plate assemblies.” Comput. Struct. 65 (5): 703–711. https://doi.org/10.1016/S0045-7949(96)00348-3.
Chen, X. L., and M. P. Sheng. 2007. “Research on vibration characteristics of L-shaped plate using a mobility power flow approach.” J. Mar. Sci. Appl. 6 (3): 12–16. https://doi.org/10.1007/s11804-007-7021-5.
Chen, Y., G. Jin, M. Zhu, Z. Liu, J. Du, and W. L. Li. 2012. “Vibration behaviors of a box-type structure built up by plates and energy transmission through the structure.” J. Sound Vib. 331 (4): 849–867. https://doi.org/10.1016/j.jsv.2011.10.002.
Cuschieri, J. M. 1990. “Structural power-flow analysis using a mobility approach of an L-shaped plate.” J. Acoust. Soc. Am. 87 (3): 1159–1165. https://doi.org/10.1121/1.398789.
Cuschieri, J. M. 1992. “Parametric analysis of the power flow on an L-shaped plate using a mobility power flow approach.” J. Acoust. Soc. Am. 91 (5): 2686–2695. https://doi.org/10.1121/1.402976.
Cuschieri, J. M., and M. D. McCollum. 1996. “In-plane and out-of-plane waves’ power transmission through an L-plate junction using the mobility power flow approach.” J. Acoust. Soc. Am. 100 (2): 857–870. https://doi.org/10.1121/1.416246.
Dickinson, S. M., and G. B. Warburton. 1967. “Vibration of box-type structures.” J. Mech. Eng. Sci. 9 (4): 325–338. https://doi.org/10.1243/JMES_JOUR_1967_009_049_02.
Du, J. T. 2009. “Study on modeling methods for structural vibration, enclosed sound field and their coupling system subject to general boundary conditions.” Doctoral thesis, School of Power and Energy Engineering, Harbin Engineering Univ.
Du, J. T., W. L. Li, G. Y. Jin, T. J. Yang, and Z. G. Liu. 2007. “An analytical method for the in-plane vibration analysis of rectangular plates with elastically restrained edges.” J. Sound Vib. 306 (3–5): 908–927. https://doi.org/10.1016/j.jsv.2007.06.011.
Du, J. T., W. L. Li, Z. G. Liu, T. J. Yang, and G. Y. Jin. 2011. “Free vibration of two elastically coupled rectangular plates with uniform elastic boundary restraints.” J. Sound Vib. 330 (4): 788–804. https://doi.org/10.1016/j.jsv.2010.08.044.
Hooker, R. J., and D. J. O’Brien. 1974. “Natural frequencies of box-type structures by a finite-element method.” J. Appl. Mech. 41 (2): 363–365. https://doi.org/10.1115/1.3423294.
Kessissoglou, N. J. 2004. “Power transmission in L-shaped plates including flexural and in-plane vibration.” J. Acoust. Soc. Am. 115 (3): 1157–1169. https://doi.org/10.1121/1.1635415.
Kuroda, K., T. Yamazaki, and F. Kuratani. 2012. “Influence of in-plane vibration on SEA model for flexural vibration on plate structures.” J. Syst. Des. Dyn. 6 (2): 227–239. https://doi.org/10.1299/jsdd.6.227.
Li, W. L., X. Zhang, J. Du, and Z. Liu. 2009. “An exact series solution for thetransverse vibration of rectangular plates with general elastic boundary supports.” J. Sound Vib. 321 (1–2): 254–269. https://doi.org/10.1016/j.jsv.2008.09.035.
Lin, T. R., and J. Pan. 2009. “Vibration characteristics of a box-type structure.” J. Vib. Acoust. 131 (3): 031004. https://doi.org/10.1115/1.3025831.
Lin, T. R., A. C. C. Tan, C. Yan, and D. Hargreaves. 2011. “Vibration of L-shaped plates under a deterministic force or moment excitation: A case of statistical energy analysis application.” J. Sound Vib. 330 (20): 4780–4797. https://doi.org/10.1016/j.jsv.2011.04.015.
Mahapatra, K., and S. K. Panigrahi. 2019. “Effect of general boundary and coupling conditions on the vibration and power flow characteristics of a coupled H-shaped three-plate structure.” Noise Vibr. Worldwide 50 (9–11): 291–305. https://doi.org/10.1177/0957456519883263.
Pinnington, R. J., and R. G. White. 1981. “Power flow through machine isolators to resonant and non-resonant beams.” J. Sound Vib. 75 (2): 179–197. https://doi.org/10.1016/0022-460X(81)90338-2.
Russillo, A. F., and G. Failla. 2022. “A novel reduced-order dynamic-stiffness formulation for locally resonant metamaterial plates.” Compos. Struct. 280 (Jan): 114811. https://doi.org/10.1016/j.compstruct.2021.114811.
Shi, D., W. Ren, H. Zhang, G. Liu, and Q. Wang. 2020. “Vibro-acoustic coupling characteristics of orthotropic L-shaped plate–cavity coupling system.” J. Low Freq. Noise Vibr. Active Control 39 (4): 1102–1126. https://doi.org/10.1177/1461348419860630.
Shi, S., J. Wang, K. Liu, G. Jin, and B. Xiao. 2021. “Vibro-acoustic modelling of the box structural–acoustic coupling system.” Results Phys. 31 (Dec): 104915. https://doi.org/10.1016/j.rinp.2021.104915.
Xu, H. G., W. L. Li, and J. T. Du. 2013. “Modal analysis of general plate structures.” J. Vib. Acoust. 136 (2): 021002. https://doi.org/10.1115/1.4025876.
Zhang, C., H. Ding, H. Chen, G. Jin, T. Ye, and Y. Chen. 2018a. “Dynamic modeling and characteristic analysis of the periodically coupled plate structure based on the dynamic stiffness method.” Results Phys. 11 (Dec): 1150–1160. https://doi.org/10.1016/j.rinp.2018.11.017.
Zhang, C., G. Jin, Z. Wang, and Y. Sun. 2021. “Dynamic stiffness formulation and vibration analysis of coupled conical-ribbed cylindrical-conical shell structure with general boundary condition.” Ocean Eng. 234 (Aug): 109294. https://doi.org/10.1016/j.oceaneng.2021.109294.
Zhang, C. Y., G. Y. Jin, and T. G. Ye. 2018b. “Harmonic response analysis of coupled plate structure using dynamic stiffness method.” Thin-Walled Struct. 127 (Jun): 402–415. https://doi.org/10.1016/j.tws.2018.02.014.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Apr 14, 2022
Accepted: Dec 14, 2022
Published online: Feb 21, 2023
Published in print: May 1, 2023
Discussion open until: Jul 21, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.