Asymmetric Vibrations of Functionally Graded Annular Nanoplates under Thermal Environment Using Nonlocal Elasticity Theory with Modified Nonlocal Boundary Conditions
Publication: Journal of Engineering Mechanics
Volume 149, Issue 5
Abstract
Analysis and numerical results are presented for the free asymmetric vibrations of functionally graded (FG) annular nanoplates subjected to nonlinearly varying temperature. The mechanical properties of the plate material were assumed to be temperature-dependent and to vary according to the power-law model in the thickness direction. Because the material is asymmetric in the thickness direction of the nanoplate, the physical neutral plane was obtained and incorporated in the analysis. The governing equations for the presented model were derived using Hamilton’s principle based on first-order shear deformation theory together with Eringen’s nonlocal elasticity theory. Modified size-dependent boundary conditions were derived to handle the paradoxical behavior of the free vibration of nanoplates with a free boundary due to nonlocal parameter and thermal environment. Two different approaches in the quadrature method along with the Chebyshev collocation method were adopted, and it was found that Chebyshev collocation method had a faster rate of convergence than the other two methods. Hence, the Chebyshev collocation method was employed to obtain the numerical values of frequencies. The effect of various parameters together with nonlocal boundary conditions on the nondimensional frequencies was studied. The results were compared with those available in the literature to validate the accuracy of the results and the efficiency of the authors’ technique.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors are grateful for the constructive comments of the learned referees to improve the quality of the article. The financial support provided by the Indian Institute of Technology Delhi, India to conduct this research work at IIT Delhi, India is gratefully acknowledged by the first author.
References
Abrate, S. 2008. “Functionally graded plates behave like homogeneous plates.” Composites, Part B 39 (1): 151–158. https://doi.org/10.1016/j.compositesb.2007.02.026.
Allahyari, E., and M. Fadaee. 2015. “Analytical investigation on free vibration of circular double-layer graphene sheets including geometrical defect and surface effects.” Composites, Part B 85 (6): 259–267. https://doi.org/10.1016/j.compositesb.2015.09.036.
Amini, M. H., M. Soleimani, A. Altafi, and A. Rastgoo. 2013. “Effects of geometric nonlinearity on free and forced vibration analysis of moderately thick annular functionally graded plate.” Mech. Adv. Mater. Struct. 20 (9): 709–720. https://doi.org/10.1080/15376494.2012.676711.
Anjomshoa, A., and M. Tahani. 2016. “Vibration analysis of orthotropic circular and elliptical nano-plates embedded in elastic medium based on nonlocal Mindlin plate theory and using Galerkin method.” J. Mech. Sci. Technol. 30 (6): 2463–2474. https://doi.org/10.1007/s12206-016-0506-x.
Ansari, R., M. A. Ashrafi, T. Pourashraf, and S. Sahmani. 2015. “Vibration and buckling characteristics of functionally graded nanoplates subjected to thermal loading based on surface elasticity theory.” Acta Astronaut. 109 (Apr): 42–51. https://doi.org/10.1016/j.actaastro.2014.12.015.
Ansari, R., and J. Torabi. 2016. “Nonlocal vibration analysis of circular double-layered graphene sheets resting on an elastic foundation subjected to thermal loading.” Acta Mech. Sin. 32 (5): 841–853. https://doi.org/10.1007/s10409-016-0574-2.
Ansari, R., J. Torabi, and A. Norouzzadeh. 2018. “Bending analysis of embedded nanoplates based on the integral formulation of Eringen’s nonlocal theory using the finite element method.” Physica B 534 (Feb): 90–97. https://doi.org/10.1016/j.physb.2018.01.025.
Arani, A. G., R. Kolahchi, and S. M. R. Allahyari. 2014. “Nonlocal DQM for large amplitude vibration of annular boron nitride sheets on nonlinear elastic medium.” J. Solid Mech. 6 (4): 334–346.
Arani, A. G., A. H. Soltan Arani, and E. Haghparast. 2020. “Flexoelectric and surface effects on vibration frequencies of annular nanoplate.” Indian J. Phys. 95 (Oct): 2063–2083. https://doi.org/10.1007/s12648-020-01854-9.
Arpanahi, R. A., S. Hosseini-Hashemi, S. Rahmanian, S. H. Hashemi, and A. Ahmadi-Savadkoohi. 2019. “Nonlocal surface energy effect on free vibration behavior of nanoplates submerged in incompressible fluid.” Thin-Walled Struct. 143 (Jan): 106212. https://doi.org/10.1016/j.tws.2019.106212.
Asemi, S. R., A. Farajpour, M. Borghei, and A. H. Hassani. 2014. “Thermal effects on the stability of circular graphene sheets via nonlocal continuum mechanics.” Lat. Am. J. Solids Struct. 11 (4): 704–724. https://doi.org/10.1590/S1679-78252014000400009.
Ashoori, A. R., E. Salari, and S. A. Sadough Vanini. 2016. “Size-dependent thermal stability analysis of embedded functionally graded annular nanoplates based on the nonlocal elasticity theory.” Int. J. Mech. Sci. 119 (Sep): 396–411. https://doi.org/10.1016/j.ijmecsci.2016.10.035.
Bahrami, A., and A. Teimourian. 2017. “Small scale effect on vibration and wave power reflection in circular annular nanoplates.” Composites, Part B 109 (Feb): 214–226. https://doi.org/10.1016/j.compositesb.2016.09.107.
Bedroud, M., R. Nazemnezhad, S. Hosseini-Hashemi, and M. Valixani. 2016. “Buckling of FG circular/annular Mindlin nanoplates with an internal ring support using nonlocal elasticity.” Appl. Math. Modell. 40 (4): 3185–3210. https://doi.org/10.1016/j.apm.2015.09.003.
Cheshmeh, E., M. Karbon, A. Eyvazian, D. W. Jung, M. Habibi, and M. Safarpour. 2022. “Buckling and vibration analysis of FG-CNTRC plate subjected to thermo-mechanical load based on higher order shear deformation theory.” Mech. Based Des. Struct. Mach. 50 (4): 1137–1160. https://doi.org/10.1080/15397734.2020.1744005.
Doan, T. L., P. B. Le, and T. T. Tran. 2021. “Free vibration analysis of functionally graded porous nano- plates with different shapes resting on elastic foundation.” Alexandria Eng. J. 2021 (1): 1–13. https://doi.org/10.22055/JACM.2021.36181.2807.
Eringen, A. C. 1983. “On differential equations of nonlocal elasticity and solutions of screw dislocation and surface waves.” J. Appl. Phys. 54 (9): 4703–4710. https://doi.org/10.1063/1.332803.
Eyvazian, A., C. Zhang, Ö. Civalek, A. Khan, T. A. Sebaey, and N. Farouk. 2022. “Wave propagation analysis of sandwich FGM nanoplate surrounded by viscoelastic foundation.” Arch. Civ. Mech. Eng. 22 (4): 1–10. https://doi.org/10.1007/s43452-022-00474-w.
Farajpour, A., M. Dehghany, and A. R. Shahidi. 2013. “Surface and nonlocal effects on the axisymmetric buckling of circular graphene sheets in thermal environment.” Composites, Part B 50 (Apr): 333–343. https://doi.org/10.1016/j.compositesb.2013.02.026.
Goodarzi, M., M. Mohammadi, and M. Khooran. 2016. “Thermo-mechanical vibration analysis of FG circular and annular nanoplate based on the visco-Pasternak foundation.” J. Solid Mech. 8 (4): 788–805.
Han, J. B., and K. M. Liew. 1999. “Axisymmetric free vibration of thick annular plates.” Int. J. Mech. Sci. 41 (9): 1089–1109. https://doi.org/10.1016/S0020-7403(98)00057-5.
Hao, Z. 2008. “Thermoelastic damping in the contour-mode vibrations of micro- and nano-electromechanical circular thin-plate resonators.” J. Sound Vib. 313 (1–2): 77–96. https://doi.org/10.1016/j.jsv.2007.11.035.
Heydari, A., and L. Li. 2020. “Dependency of critical damping on various parameters of tapered bidirectional graded circular plates rested on Hetenyi medium.” Proc. Inst. Mech. Eng. Part C: J. Mech. Eng. Sci. 235 (12): 2157–2179. https://doi.org/10.1177/0954406220952498.
Hosseini-Hashemi, S., R. A. Arpanahi, S. Rahmanian, and A. Ahmadi-Savadkoohi. 2019. “Free vibration analysis of nano-plate in viscous fluid medium using nonlocal elasticity.” Eur. J. Mech. A. Solids 74 (Jan): 440–448. https://doi.org/10.1016/j.euromechsol.2019.01.002.
Iijima, S. 1991. “Helical microtubules of graphitic carbon.” Nature 354 (Jun): 56–58. https://doi.org/10.1038/354056a0.
Jiang, J.-W. 2016. “Buckled graphene for efficient energy harvest, storage and conversion.” Nanotechnology 27 (40): 405402. https://doi.org/10.1088/0957-4484/27/40/405402.
Koizumi, M. 1993. “The concept of FGM.” Ceram. Trans. Funct. Grad. Mater. 34 (Apr): 3–10. https://doi.org/10.1016/S1359-8368(96)00016-9.
Kröner, E. 1967. “Elasticity theory of materials with long range cohesive forces.” Int. J. Solids Struct. 3 (5): 731–742. https://doi.org/10.1016/0020-7683(67)90049-2.
Kumar, Y., and R. Lal. 2013. “Prediction of frequencies of free axisymmetric vibration of two-directional functionally graded annular plates on Winkler foundation.” Eur. J. Mech. A. Solids 42 (Jun): 219–228. https://doi.org/10.1016/j.euromechsol.2013.06.001.
Lal, R., and C. Dangi. 2019. “Thermomechanical vibration of bi-directional functionally graded non-uniform timoshenko nanobeam using nonlocal elasticity theory.” Composites, Part B 172 (Jan): 724–742. https://doi.org/10.1016/j.compositesb.2019.05.076.
Lal, R., and R. Saini. 2019. “On radially symmetric vibrations of functionally graded non-uniform circular plate including non-linear temperature rise.” Eur. J. Mech. A. Solids 77 (Mar): 103796. https://doi.org/10.1016/j.euromechsol.2019.103796.
Lal, R., and R. Saini. 2020. “Vibration analysis of FGM circular plates under non-linear temperature variation using generalized differential quadrature rule.” Appl. Acoust. 158 (Jun): 107027. https://doi.org/10.1016/j.apacoust.2019.107027.
Li, G., Y. Xing, Z. Wang, and Q. Sun. 2020. “Effect of boundary conditions and constitutive relations on the free vibration of nonlocal beams.” Results Phys. 19 (Feb): 103414. https://doi.org/10.1016/j.rinp.2020.103414.
Lu, P., H. P. Lee, and C. Lu. 2006. “Dynamic properties of flexural beams using a nonlocal elasticity model.” J. Appl. Phys. 99 (7): 073510. https://doi.org/10.1063/1.2189213.
Mahinzare, M., M. Jannat Alipour, S. A. Sadatsakkak, and M. Ghadiri. 2019. “A nonlocal strain gradient theory for dynamic modeling of a rotary thermo piezo electrically actuated nano FG circular plate.” Mech. Syst. Sig. Process. 115 (Jun): 323–337. https://doi.org/10.1016/j.ymssp.2018.05.043.
Mehrabani, M., M. R. Ashory, M. M. Khatibi, and S. Sadeghzadeh. 2019. “Vibration analysis of circular single-layer graphene sheet using finite element method.” Mech. Adv. Compos. Struct. 6 (2): 131–138. https://doi.org/10.22075/macs.2019.16510.1179.
Mirzaei, M., and Y. Kiani. 2016. “Nonlinear free vibration of temperature-dependent sandwich beams with carbon nanotube-reinforced face sheets.” Acta Mech. 227 (7): 1869–1884. https://doi.org/10.1007/s00707-016-1593-6.
Mohammadi, M., A. Farajpour, and M. Goodarzi. 2013a. “Temperature effect on vibration analysis of annular graphene sheet embedded on visco-Pasternak foundation.” J. Solid Mech. 15 (3): 305–323.
Mohammadi, M., A. Farajpour, M. Goodarzi, and F. Dinari. 2014. “Thermo-mechanical vibration analysis of annular and circular graphene sheet embedded in an elastic medium.” Lat. Am. J. Solids Struct. 11 (4): 659–682. https://doi.org/10.1590/S1679-78252014000400007.
Mohammadi, M., M. Ghayour, and A. Farajpour. 2013b. “Free transverse vibration analysis of circular and annular graphene sheets with various boundary conditions using the nonlocal continuum plate model.” Composites, Part B 45 (1): 32–42. https://doi.org/10.1016/j.compositesb.2012.09.011.
Mohammadi, M., M. Goodarzi, and M. Ghayour. 2013c. “Influence of in-plane pre-load on the vibration frequency of circular graphene sheet via nonlocal continuum theory.” Composites, Part B 51 (Jun): 121–129. https://doi.org/10.1016/j.compositesb.2013.02.044.
Moshir, S. K., H. Eipakchi, and H. Vatandoost. 2018. “Analytical procedure for determining natural frequencies of annular single-layered graphene sheet via nonlocal elasticity theory.” J. Eng. Mech. 144 (9): 04018086. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001515.
Norouzzadeh, A., and R. Ansari. 2017. “Finite element analysis of nano-scale Timoshenko beams using the integral model of nonlocal elasticity.” Physica E 88 (Jan): 194–200. https://doi.org/10.1016/j.physe.2017.01.006.
Norouzzadeh, A., R. Ansari, and H. Rouhi. 2018. “Isogeometric vibration analysis of small-scale Timoshenko beams based on the most comprehensive size-dependent theory.” Sci. Iran. 25 (3): 1864–1878. https://doi.org/10.24200/sci.2018.5267.1177.
Panc, V. 1975. Theories of elastic plates. Leyden, Netherlands: Noordhoff International.
Paradoen, G. C. 1977. “Asymmetric vibration and stability of circular plates.” Compos. Struct. 9 (Sep): 89–95. https://doi.org/10.1016/0045-7949(78)90062-7.
Reddy, J. N. 2003. Mechanics of laminated composite plates and shells: Theory and analysis. 2nd ed. London: CRC Press.
Reddy, J. N. 2008. Theory and analysis of elastic plates and shells Boca Raton, FL: CRC Press.
Rezaiee-Pajand, M., and M. Mokhtari. 2020. “Size dependent buckling analysis of nano sandwich beams by two schemes.” Mech. Adv. Mater. Struct. 27 (12): 975–990. https://doi.org/10.1080/15376494.2018.1503381.
Saini, R., and R. Lal. 2022. “Axisymmetric vibrations of temperature-dependent functionally graded moderately thick circular plates with two-dimensional material and temperature distribution.” Eng. Comput. 38 (1): 437–452. https://doi.org/10.1007/s00366-020-01056-1.
Saini, R., and S. Pradyumna. 2022. “Effect of thermal environment on the asymmetric vibration of temperature-dependent two- dimensional functionally graded annular plate by Chebyshev polynomials.” J. Therm. Stresses 45 (9): 740–761. https://doi.org/10.1080/01495739.2022.2090472.
Sari, M. S. 2015. “Free vibration analysis of non-local annular sector Mindlin plates.” Int. J. Mech. Sci. 96 (97): 25–35. https://doi.org/10.1016/j.ijmecsci.2015.03.010.
Sepahi, O., M. R. Forouzan, and P. Malekzadeh. 2011. “Thermal buckling and postbuckling analysis of functionally graded annular plates with temperature-dependent material properties.” Mater. Des. 32 (7): 4030–4041. https://doi.org/10.1016/j.matdes.2011.03.063.
Shu, C. 2000. Differential quadrature and its applications in engineering. Berlin: Springer.
Talebizadehsardari, P., A. Eyvazian, M. Asmael, B. Karami, D. Shahsavari, and R. B. Mahani. 2020. “Static bending analysis of functionally graded polymer composite curved beams reinforced with carbon nanotubes.” Thin-Walled Struct. 157 (Apr): 107139. https://doi.org/10.1016/j.tws.2020.107139.
Tao, C., and T. Dai. 2021. “Large amplitude free vibration of porous skew and elliptical nanoplates based on nonlocal elasticity by isogeometric analysis.” Mech. Adv. Mater. Struct. 10 (Jun): 1–32. https://doi.org/10.1080/15376494.2021.1873467.
Vidhya, M. S., F. Ameen, T. Dawoud, R. Yuvakkumar, G. Ravi, P. Kumar, and D. Velauthapillai. 2021. “Anti-cancer applications of Zr, Co, Ni-doped ZnO thin nanoplates.” Mater. Lett. 283 (Sep): 128760. https://doi.org/10.1016/j.matlet.2020.128760.
Wang, C. M., Y. Y. Zhang, and X. Q. He. 2007. “Vibration of nonlocal Timoshenko beams.” Nanotechnology 18 (10): 105401. https://doi.org/10.1088/0957-4484/18/10/105401.
Wang, W., G. Xue, and Z. Teng. 2022. “Analysis of free vibration characteristics of porous FGM circular plates in a temperature field.” J. Vib. Eng. Technol. 10 (4): 1369–1380. https://doi.org/10.1007/s42417-022-00452-9.
Yang, Y., Z. L. Hu, and X. F. Li. 2021. “Axisymmetric bending and vibration of circular nanoplates with surface stresses.” Thin-Walled Struct. 166 (Jan): 108086. https://doi.org/10.1016/j.tws.2021.108086.
Zarei, M., G. R. Faghani, M. Ghalami, and G. H. Rahimi. 2018. “Buckling and vibration analysis of tapered circular nano plate.” J. Appl. Comput. Mech. 4 (1): 40–54. https://doi.org/10.22055/jacm.2017.22176.1127.
Zarei, M., and G. Rahimi. 2018. “Free axisymmetric bending vibration analysis of two directional FGM circular nano-plate on the elastic foundation.” J. Solid Mech. 10 (4): 874–893.
Zhou, S. M., L. P. Sheng, and Z. B. Shen. 2014. “Transverse vibration of circular graphene sheet-based mass sensor via nonlocal Kirchhoff plate theory.” Comput. Mater. Sci. 86 (Jun): 73–78. https://doi.org/10.1016/j.commatsci.2014.01.031.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 149 • Issue 5 • May 2023
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Oct 15, 2022
Accepted: Jan 7, 2023
Published online: Mar 1, 2023
Published in print: May 1, 2023
Discussion open until: Aug 1, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.