Programmable Instability of Miura Tube–Based Spatial Structures
Publication: Journal of Engineering Mechanics
Volume 149, Issue 9
Abstract
Programmable instability is crucial to the design of intelligent structures. Origami has inspired new methods of designing spatial truss structures with programmable instability. In this study, the finite-particle method was used to investigate the programmable instability modes of spatial structures based on Miura-ori, an origami pattern. Truss models of single-layer and multilayer Miura tube–based spatial structures were established. The instability process for each structure was simulated, and each structure’s stiffness, strain energy, and instability processes were studied. The instability modes of these structures were controlled through adjustment of two geometrical parameters: the angle in a plane and the angle between planes. The influence of these parameters on structural stability was analyzed. Finally, the numerical simulation results were compared with the results of experiments involving physical models. This paper proposes a new design for Miura tube–based truss structures with programmable instability.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, codes, tables, or figures used during the study are available from the corresponding author by request.
Acknowledgments
The authors gratefully acknowledge the financial support provided by the National Natural Science Foundation of China (No. 52238001), and Guangdong Provincial Science and Technology Project of China (No. 210715156881741).
References
Bai, X.-C., T. G. Martin, S. H. W. Scheres, and H. Dietz. 2012. “Cryo-EM structure of a 3D DNA-origami object.” Proc. Natl. Acad. Sci. 109 (49): 20012–20017. https://doi.org/10.1073/pnas.1215713109.
Chen, Y., L. Fan, Y. Bai, J. Feng, and P. Sareh. 2020. “Assigning mountain-valley fold lines of flat-foldable origami patterns based on graph theory and mixed-integer linear programming.” Comput. Struct. 239 (Oct): 106328. https://doi.org/10.1016/j.compstruc.2020.106328.
Chen, Y., W. Lv, J. Li, and Z. You. 2017. “An extended family of rigidly foldable origami tubes.” J. Mech. Rob. 9 (2): 021002. https://doi.org/10.1115/1.4035559.
Chen, Y., J. Yan, J. Feng, and P. Sareh. 2021. “Particle swarm optimization-based metaheuristic design generation of non-trivial flat-foldable origami tessellations with degree-4 vertices.” J. Mech. Des. 143 (1): 011703. https://doi.org/10.1115/1.4047437.
Du, Y., C. Song, J. Xiong, and L. Wu. 2019. “Fabrication and mechanical behaviors of carbon fiber reinforced composite foldcore based on curved-crease origami.” Compos. Sci. Technol. 174 (Apr): 94–105. https://doi.org/10.1016/j.compscitech.2019.02.019.
Duan, Y. F., K. He, H. M. Zhang, E. C. Ting, C. Y. Wang, S. K. Chen, and R. Z. Wang. 2014. “Entire-process simulation of earthquake-induced collapse of a mockup cable-stayed bridge by vector form intrinsic finite element (VFIFE) method.” Adv. Struct. Eng. 17 (3): 347–360. https://doi.org/10.1260/1369-4332.17.3.347.
Fang, H., S. Li, H. Ji, and K. W. Wang. 2017. “Dynamics of a bistable Miura-origami structure.” Phys. Rev. E 95 (5): 052211. https://doi.org/10.1103/PhysRevE.95.052211.
Filipov, E. T., K. Liu, T. Tachi, M. Schenk, and G. H. Paulino. 2017. “Bar and hinge models for scalable analysis of origami.” Int. J. Solids Struct. 124 (Oct): 26–45. https://doi.org/10.1016/j.ijsolstr.2017.05.028.
Filipov, E. T., G. H. Paulino, and T. Tachi. 2016. “Origami tubes with reconfigurable polygonal cross-sections.” Proc. R. Soc. A 472 (2185): 20150607. https://doi.org/10.1098/rspa.2015.0607.
Filipov, E. T., T. Tachi, and G. H. Paulino. 2015. “Origami tubes assembled into stiff, yet reconfigurable structures and metamaterials.” Proc. Natl. Acad. Sci. 112 (40): 12321–12326. https://doi.org/10.1073/pnas.1509465112.
Lee, T.-U., X. Yang, J. Ma, Y. Chen, and J. M. Gattas. 2019. “Elastic buckling shape control of thin-walled cylinder using pre-embedded curved-crease origami patterns.” Int. J. Mech. Sci. 151 (Feb): 322–330. https://doi.org/10.1016/j.ijmecsci.2018.11.005.
Ma, J., J. Song, and Y. Chen. 2018. “An origami-inspired structure with graded stiffness.” Int. J. Mech. Sci. 136 (Feb): 134–142. https://doi.org/10.1016/j.ijmecsci.2017.12.026.
Miyashita, S., S. Guitron, M. Ludersdorfer, C. R. Sung, and D. Rus. 2015. “An untethered miniature origami robot that self-folds, walks, swims, and degrades.” In Proc., 2015 IEEE Int. Conf. on Robotics and Automation (ICRA), 1490–1496. New York: IEEE.
Peraza Hernandez, E. A., D. J. Hartl, R. J. Malak Jr., and D. Lagoudas. 2014. “Origami-inspired active structures: A synthesis and review.” Smart Mater. Struct. 23 (9): 094001. https://doi.org/10.1088/0964-1726/23/9/094001.
Sareh, P., P. Chermprayong, M. Emmanuelli, H. Nadeem, and M. Kovac. 2018. “Rotorigami: A rotary origami protective system for robotic rotorcraft.” Sci. Rob. 3 (22): eaah5228. https://doi.org/10.1126/scirobotics.aah5228.
Shih, C., Y.-K. Wang, and E. C. Ting. 2004. “Fundamentals of a vector form intrinsic finite element: Part III. Convected material frame and examples.” J. Mech. 20 (2): 133–143. https://doi.org/10.1017/S172771910000335X.
Silverberg, J. L., J.-H. Na, A. A. Evans, B. Liu, T. C. Hull, C. D. Santangelo, R. J. Lang, R. C. Hayward, and I. Cohen. 2015. “Origami structures with a critical transition to bistability arising from hidden degrees of freedom.” Nat. Mater. 14 (4): 389–393. https://doi.org/10.1038/nmat4232.
Xu, X., Y. Yu, Y. Z. Luo, and Y. B. Shen. 2011. “Tensegrity form-finding using finite particle method.” Adv. Mater. Res. 201–203 (Feb): 1166–1169. https://doi.org/10.4028/www.scientific.net/AMR.201-203.1166.
Yang, M. 2018. “Thick-panel origami inspired forceps for minimally invasive surgery.” J. Mech. Eng. 54 (17): 36. https://doi.org/10.3901/JME.2018.17.036.
Yasuda, H., T. Tachi, M. Lee, and J. Yang. 2017. “Origami-based tunable truss structures for non-volatile mechanical memory operation.” Nat. Commun. 8 (1): 962. https://doi.org/10.1038/s41467-017-00670-w.
Yu, Y., and Y. Z. Luo. 2012. “Large deflection analysis of 3D steel frame using finite particle method.” Adv. Mater. Res. 446–449 (Jan): 283–287. https://doi.org/10.4028/www.scientific.net/AMR.446-449.283.
Yu, Y., G. H. Paulino, and Y. Luo. 2011. “Finite particle method for progressive failure simulation of truss structures.” J. Struct. Eng. 137 (10): 1168–1181. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000321.
Yu, Y., X.-Z. Xu, and Y.-Z. Luo. 2021. “Programmable instability of spatial structures based on Kresling origami.” Eng. Mech. 38 (8): 75–84. https://doi.org/10.6052/j.issn.1000-4750.2020.08.0545.
Zhai, Z., Y. Wang, and H. Jiang. 2018. “Origami-inspired, on-demand deployable and collapsible mechanical metamaterials with tunable stiffness.” Proc. Natl. Acad. Sci. 115 (9): 2032–2037. https://doi.org/10.1073/pnas.1720171115.
Zhang, D., G. Lu, D. Ruan, and Q. Fei. 2020. “Energy absorption in the axial crushing of hierarchical circular tubes.” Int. J. Mech. Sci. 171 (Apr): 105403. https://doi.org/10.1016/j.ijmecsci.2019.105403.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Dec 30, 2021
Accepted: Apr 25, 2023
Published online: Jun 30, 2023
Published in print: Sep 1, 2023
Discussion open until: Nov 30, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.