Investigation of the Low-Velocity Impact and Compression after Impact Performance of CFRPs
Publication: Journal of Engineering Mechanics
Volume 149, Issue 9
Abstract
Low-velocity impacts (LVI) during a structure’s service life may affect the mechanical properties of carbon-fiber–reinforced composites (CFRP) and, consequently, their structural performance. Accordingly, it is crucial to consider this issue in the design steps of composite structures. In the present study, experimental procedures and numerical modeling have been implemented to predict the damage induced by LVI and its influence on the residual compressive strength of carbon/epoxy laminates. For numerical simulation, a user-defined subroutine (VUMAT) is utilized in commercial finite element software ABAQUS/Explicit. The first step of numerical simulations corresponds to the collision of the impactor with the composite plate. Then, the impacted composite plate is subjected to a compression test to estimate the residual compressive strength. Experimental tests are completed by performing LVI tests to validate the numerical simulation results in three impact energy levels of 10, 15, and 20 J. The results reveal good agreement between experimental and numerical methods. According to the results, 18.1%, 28.7%, and 33.0% reductions in compressive strength of the carbon/epoxy composites were observed due to LVI with energy levels of 10, 15, and 20 J, respectively.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
References
Abir, M. R., T. E. Tay, M. Ridha, and H. P. Lee. 2017. “Modelling damage growth in composites subjected to impact and compression after impact.” Compos. Struct. 168 (May): 13–25. https://doi.org/10.1016/j.compstruct.2017.02.018.
Abrate, S. 1994. “Impact on laminated composites: Recent advances.” Appl. Mech. Rev. 47 (11): 517–544. https://doi.org/10.1115/1.3111065.
ASTM. 2012a. Standard test method for compressive properties of polymer matrix composite materials using a combined loading compression (CLC). D6641/D6641M-14. West Conshohocken, PA: ASTM.
ASTM. 2012b. Standard test method for compressive residual strength properties of damaged polymer matrix composite plates. D7137/D7137M-07. West Conshohocken, PA: ASTM.
ASTM. 2013a. Standard test method for in-plane shear response of polymer matrix composite materials by tensile test of a 45° laminate. ASTM D3518. West Conshohocken, PA: ASTM.
ASTM. 2013b. Standard test method for measuring the damage resistance of a fiber-reinforced polymer matrix composite to a drop-weight impact event 1—OLD. D7136/D7136M-05. West Conshohocken, PA: ASTM.
ASTM. 2014. Standard test method for tensile properties of polymer matrix composite materials. D3039/D3039M. West Conshohocken, PA: ASTM.
Benzeggagh, M. L., and M. J. C. S. Kenane. 1996. “Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus.” Compos. Sci. Technol. 56 (4): 439–449. https://doi.org/10.1016/0266-3538(96)00005-X.
Bergan, A., J. G. Bakuckas, A. Lovejoy, D. Jegley, K. Linton, G. Korkosz, J. Awerbuch, and T. Tan. 2012. “Full-scale test and analysis results of a PRSEUS fuselage panel to assess damage containment features.” In Proc., 2012 Aircraft Airworthiness and Sustainment Conf., 1–17. Washington, DC: National Aeronautics and Space Administration.
Bogenfeld, R., J. Kreikemeier, and T. Wille. 2018. “Review and benchmark study on the analysis of low-velocity impact on composite laminates.” Eng. Fail. Anal. 86 (Apr): 72–99. https://doi.org/10.1016/j.engfailanal.2017.12.019.
Bouvet, C., S. Rivallant, and J. J. Barrau. 2012. “Low velocity impact modeling in composite laminates capturing permanent indentation.” Compos. Sci. Technol. 72 (16): 1977–1988. https://doi.org/10.1016/j.compscitech.2012.08.019.
Brewer, J. C., and P. A. Lagace. 1988. “Quadratic stress criterion for initiation of delamination.” J. Compos. Mater. 22 (12): 1141–1155. https://doi.org/10.1177/002199838802201205.
Catalanotti, G., P. P. Camanho, J. Xavier, C. G. Dávila, and A. T. Marques. 2010. “Measurement of resistance curves in the longitudinal failure of composites using digital image correlation.” Compos. Sci. Technol. 70 (13): 1986–1993. https://doi.org/10.1016/j.compscitech.2010.07.022.
Daniel, I. M., J. Luo, and P. M. Schubel. 2008. “Three-dimensional characterization of textile composites.” Composites, Part B 39 (Jan): 13–19. https://doi.org/10.1016/j.compositesb.2007.02.002.
Daniel, I. M., J. Luo, P. M. Schubel, and B. T. Werner. 2009. “Interfiber/interlaminar failure of composites under multi-axial states of stress.” Compos. Sci. Technol. 69 (6): 764–771. https://doi.org/10.1016/j.compscitech.2008.04.016.
Donadon, M. V., L. Iannucci, B. G. Falzon, J. M. Hodgkinson, and S. F. M. de Almeida. 2008. “A progressive failure model for composite laminates subjected to low velocity impact damage.” Comput. Struct. 86 (11–12): 1232–1252. https://doi.org/10.1016/j.compstruc.2007.11.004.
Faggiani, A., and B. G. Falzon. 2010. “Predicting low-velocity impact damage on a stiffened composite panel.” Composites, Part A 41 (6): 737–749. https://doi.org/10.1016/j.compositesa.2010.02.005.
Fakhreddini-Najafabadi, S., M. Torabi, and F. Taheri-Behrooz. 2021. “An experimental investigation on the low-velocity impact performance of the CFRP filled with nanoclay.” Aerosp. Sci. Technol. 116 (Sep): 106858. https://doi.org/10.1016/j.ast.2021.106858.
Falzon, B. G., and P. Apruzzese. 2011a. “Numerical analysis of intralaminar failure mechanisms in composite structures. Part I: FE implementation.” Compos. Struct. 93 (2): 1039–1046. https://doi.org/10.1016/j.compstruct.2010.06.028.
Falzon, B. G., and P. Apruzzese. 2011b. “Numerical analysis of intralaminar failure mechanisms in composite structures. Part II: Applications.” Compos. Struct. 93 (2): 1047–1053. https://doi.org/10.1016/j.compstruct.2010.06.022.
Feng, D., and F. Aymerich. 2014. “Finite element modelling of damage induced by low-velocity impact on composite laminates.” Compos. Struct. 108 (1): 161–171. https://doi.org/10.1016/j.compstruct.2013.09.004.
Galehdari, S. A., M. Kadkhodayan, and S. Hadidi-Moud. 2015. “Low velocity impact and quasi-static in-plane loading on a graded honeycomb structure; experimental, analytical and numerical study.” Aerosp. Sci. Technol. 47 (Dec): 425–433. https://doi.org/10.1016/j.ast.2015.10.010.
Gao, Q., W. H. Liao, and L. Wang. 2020. “On the low-velocity impact responses of auxetic double arrowed honeycomb.” Aerosp. Sci. Technol. 98 (Mar): 105698. https://doi.org/10.1016/j.ast.2020.105698.
González, E. V., P. Maimí, P. P. Camanho, A. Turon, and J. A. Mayugo. 2012. “Simulation of drop-weight impact and compression after impact tests on composite laminates.” Compos. Struct. 94 (11): 3364–3378. https://doi.org/10.1016/j.compstruct.2012.05.015.
Goodarz, M., S. H. Bahrami, M. Sadighi, and S. Saber-samandari. 2019. “Low-velocity impact performance of nanofiber-interlayered aramid/epoxy nanocomposites.” Composites, Part B 173 (May): 106975. https://doi.org/10.1061/(ASCE)AS.1943-5525.0001417.
Kachanov, L. M. 1986. Introduction to continuum damage mechanics. Mechanics of elastic stability. Dordrecht, Netherlands: Springer.
Liu, H., B. G. Falzon, and W. Tan. 2017. “Experimental and numerical studies on the impact response of damage-tolerant hybrid unidirectional/woven carbon-fibre reinforced composite laminates.” Composites, Part B 136 (Mar): 101–118.https://doi.org/10.1016/j.compositesb.2017.10.016.
Liu, H., B. G. Falzon, and W. Tan. 2018. “Predicting the compression-after-impact (CAI) strength of damage-tolerant hybrid unidirectional/woven carbon-fibre reinforced composite laminates.” Composites, Part A 105 (Feb): 189–202. https://doi.org/10.1016/j.compositesa.2017.11.021.
Liu, H., J. Liu, Y. Ding, Z. E. Hall, X. Kong, J. Zhou, B. R. K. Blackman, A. J. Kinloch, and J. P. Dear. 2020. “A three-dimensional elastic-plastic damage model for predicting the impact behaviour of fibre-reinforced polymer-matrix composites.” Composites, Part B 201 (Jul): 108389. https://doi.org/10.1016/j.compositesb.2020.108389.
Lopes, C. S., P. P. Camanho, Z. Gürdal, P. Maimí, and E. V. González. 2009. “Low-velocity impact damage on dispersed stacking sequence laminates. Part II: Numerical simulations.” Compos. Sci. Technol. 69 (7–8): 937–947. https://doi.org/10.1016/j.compscitech.2009.02.015.
Mendes, P. A. A. E., and M. V. Donadon. 2014. “Numerical prediction of compression after impact behavior of woven composite laminates.” Compos. Struct. 113 (1): 476–491. https://doi.org/10.1016/j.compstruct.2014.03.051.
Puck, A., and H. Schürmann. 2002. “Failure analysis of FRP laminates by means of physically based phenomenological models.” Compos. Sci. Technol. 62 (12–13): 1633–1662. https://doi.org/10.1016/S0266-3538(01)00208-1.
Ridha, M., C. H. Wang, B. Y. Chen, and T. E. Tay. 2014. “Modelling complex progressive failure in notched composite laminates with varying sizes and stacking sequences.” Composites, Part A 58 (Mar): 16–23. https://doi.org/10.1016/j.compositesa.2013.11.012.
Simulia. 2020. Systems D. ABAQUS documentation. Providence, RI: Simulia.
Soto, A., E. V. González, P. Maimí, J. A. Mayugo, P. R. Pasquali, and P. P. Camanho. 2018. “A methodology to simulate low velocity impact and compression after impact in large composite stiffened panels.” Compos. Struct. 204 (Nov): 223–238. https://doi.org/10.1016/j.compstruct.2018.07.081.
Tan, W., and B. G. Falzon. 2016. “Modelling the crush behaviour of thermoplastic composites.” Compos. Sci. Technol. 134 (Oct): 57–71. https://doi.org/10.1016/j.compscitech.2016.07.015.
Tan, W., B. G. Falzon, L. N. S. Chiu, and M. Price. 2015. “Predicting low velocity impact damage and compression-after-impact (CAI) behaviour of composite laminates.” Composites, Part A 71 (Apr): 212–226. https://doi.org/10.1016/j.compositesa.2015.01.025.
Tita, V., J. de Carvalho, and D. Vandepitte. 2008. “Failure analysis of low velocity impact on thin composite laminates: Experimental and numerical approaches.” Compos. Struct. 83 (4): 413–428. https://doi.org/10.1016/j.compstruct.2007.06.003.
Tuo, H., Z. Lu, X. Ma, J. Xing, and C. Zhang. 2019a. “Damage and failure mechanism of thin composite laminates under low-velocity impact and compression-after-impact loading conditions.” Composites, Part B 163 (Jan): 642–654. https://doi.org/10.1016/j.compositesb.2019.01.006.
Tuo, H., Z. Lu, X. Ma, C. Zhang, and S. Chen. 2019b. “An experimental and numerical investigation on low-velocity impact damage and compression-after-impact behavior of composite laminates.” Composites, Part B 167 (Dec): 329–341. https://doi.org/10.1016/j.compositesb.2018.12.043.
Turon, A., C. G. Dávila, P. P. Camanho, and J. Costa. 2007. “An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models.” Eng. Fract. Mech. 74 (10): 1665–1682. https://doi.org/10.1016/j.engfracmech.2006.08.025.
Yang, B., K. Fu, and Y. Li. 2022. “Modeling of biaxial compression behavior of carbon fiber–Reinforced modeling of biaxial compression behavior of carbon fiber–Reinforced composite after low-velocity impact.” J. Aerosp. Eng. 35 (3): 04022024. https://doi.org/10.1061/(ASCE)AS.1943-5525.0001417.
Zhang, J., and X. Zhang. 2015. “Simulating low-velocity impact induced delamination in composites by a quasi-static load model with surface-based cohesive contact.” Compos. Struct. 125 (Jul): 51–57. https://doi.org/10.1016/j.compstruct.2015.01.050.
Zhou, J., J. Liu, X. Zhang, Y. Yan, L. Jiang, I. Mohagheghian, J. P. Dear, and M. N. Charalambides. 2019. “Experimental and numerical investigation of high velocity soft impact loading on aircraft materials.” Aerosp. Sci. Technol. 90 (Jul): 44–58. https://doi.org/10.1016/j.ast.2019.04.015.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Aug 27, 2022
Accepted: May 16, 2023
Published online: Jul 4, 2023
Published in print: Sep 1, 2023
Discussion open until: Dec 4, 2023
ASCE Technical Topics:
- Composite materials
- Composite structures
- Compression
- Compressive strength
- Continuum mechanics
- Dynamics (solid mechanics)
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Finite element method
- Impact tests
- Laboratory tests
- Material mechanics
- Material properties
- Materials engineering
- Methodology (by type)
- Models (by type)
- Numerical methods
- Numerical models
- Solid mechanics
- Strength of materials
- Structural dynamics
- Structural engineering
- Structures (by type)
- Synthetic materials
- Tests (by type)
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.