Block Planning Based on Grid’s Topology for the Dismantling of Long-Span Spatial Lattice Structures
Publication: Journal of Construction Engineering and Management
Volume 150, Issue 9
Abstract
The demolition issue of long-span spatial lattice structures has become increasingly prominent with the rapid urban development and building upgrades. Building deconstruction offers superior economic and environmental benefits compared to traditional demolition and therefore should be further promoted and applied. Dismantling in blocks is an efficient approach for deconstruction of long-span spatial lattice structures, surpassing the practice of dismantling individual components one by one. However, dividing the entire structure into substructures considering the convenience and safety of dismantling operations is the first challenge of dismantling in blocks yet to be overcome. In this study, a block planning method was proposed to aid practitioners in making high-quality block schemes. The topological relation of spatial grids defined by the adjacency matrix is the basis. The comprehensive evaluation index was established reflecting the operability, efficiency, and safety of the block scheme. Taking the combination of spatial grids as the variable and the comprehensive evaluation index combined with constraint functions as the objective, the block planning was formulated as an optimization problem. The genetic algorithm was adopted to solve this problem, and two examples were presented for verification. Results confirmed that the proposed block planning method is effective to generate the high-quality block scheme that meets topology, quantity, and lifting weight requirements and has great synthetical performance. The consideration of structural symmetry can accelerate the optimization process. The zoning planning strategy provides a tool for practitioners to make the block scheme that meets the lifting weight requirements of different zones when the crane’s lifting capacity is limited by operating space. The proposed block planning method will enrich the construction management technologies of dismantling projects and help engineers make efficient and wise decisions.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This work was supported by the National Natural Science Foundation of China (Grant No. 52078163).
References
Agarwal, J., D. Blockley, and N. Woodman. 2003. “Vulnerability of structural systems.” Struct. Saf. 25 (3): 263–286. https://doi.org/10.1016/S0167-4730(02)00068-1.
Akbarnezhad, A., K. C. G. Ong, and L. R. Chandra. 2014. “Economic and environmental assessment of deconstruction strategies using building information modeling.” Autom. Constr. 37 (Jan): 131–144. https://doi.org/10.1016/j.autcon.2013.10.017.
Dantata, N., A. Touran, and J. Wang. 2005. “An analysis of cost and duration for deconstruction and demolition of residential buildings in Massachusetts.” Resour. Conserv. Recycl. 44 (1): 1–15. https://doi.org/10.1016/j.resconrec.2004.09.001.
Deb, K. 2000. “An efficient constraint handling method for genetic algorithms.” Comput. Methods Appl. Mech. Eng. 186 (2–4): 311–338. https://doi.org/10.1016/S0045-7825(99)00389-8.
Deep, K., K. P. Singh, L. Kansal, and C. Mohan. 2009. “A real coded genetic algorithm for solving integer and mixed integer optimization problems.” Appl. Math. Comput. 212 (2): 505–518. https://doi.org/10.1016/j.amc.2009.02.044.
El-Rayes, K., and A. Khalafallah. 2005. “Trade-off between safety and cost in planning construction site layouts.” J. Constr. Eng. Manage. 131 (11): 1186–1195. https://doi.org/10.1061/(ASCE)0733-9364(2005)131:11(1186).
Faghihi, V., K. F. Reinschmidt, and J. H. Kang. 2014. “Construction scheduling using Genetic Algorithm based on Building Information Model.” Expert Syst. Appl. 41 (16): 7565–7578. https://doi.org/10.1016/j.eswa.2014.05.047.
Fan, F., Z. X. Wang, H. J. Wang, H. L. Qian, Y. M. Xu, S. H. Liu, and F. P. Zhang. 2014. “Analysis of structure division erection for streamer grid of Hangzhou International Expo Center.” [In Chinese.] J. Build. Struct. 35 (S1): 77–82. https://doi.org/10.14006/j.jzjgxb.2014.s1.012.
Guo, H. L., Y. Zhou, Z. Y. Pan, Z. T. Zhang, Y. T. Yu, and X. Lin. 2022. “Automated selection and localization of mobile cranes in construction planning.” Buildings 12 (5): 580. https://doi.org/10.3390/buildings12050580.
Guy, B. 2010. Green building: Project planning & cost estimating: Building deconstruction. New York: Wiley.
Han, S., Z. Lei, B. Ahmed, A. H. Mohamed, and U. Hermann. 2016. “3D visualization-based motion planning of mobile crane operations in heavy industrial projects.” J. Comput. Civ. Eng. 30 (1): 04014127. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000467.
Harkouss, F., F. Fardoun, and P. H. Biwole. 2018. “Multi-objective optimization methodology for net zero energy buildings.” J. Build. Eng. 16 (Mar): 57–71. https://doi.org/10.1016/j.jobe.2017.12.003.
Hu, S. B., Y. H. Fang, and Y. Bai. 2021. “Automation and optimization in crane lift planning: A critical review.” Adv. Eng. Inf. 49 (Aug): 101346. https://doi.org/10.1016/j.aei.2021.101346.
Ji, Y. S., and F. Leite. 2018. “Automated tower crane planning: Leveraging 4-dimensional BIM and rule-based checking.” Autom. Constr. 93 (Sep): 78–90. https://doi.org/10.1016/j.autcon.2018.05.003.
Kandil, A., and K. El-Rayes. 2005. “Parallel computing framework for optimizing construction planning in large-scale projects.” J. Comput. Civ. Eng. 19 (3): 304–312. https://doi.org/10.1061/(ASCE)0887-3801(2005)19:3(304).
Katoch, S., S. S. Chauhan, and V. Kumar. 2021. “A review on genetic algorithm: Past, present, and future.” Multimedia Tools Appl. 80 (5): 8091–8126. https://doi.org/10.1007/s11042-020-10139-6.
Kayashima, M., Y. Shinozaki, T. Koga, and H. Ichihara. 2012. “A new demolition system for high-rise buildings.” In Proc., CTBUH 2012 9th World Congress, 631–636. Shanghai, China: Council on Tall Buildings and Urban Habitat.
Kim, K., Y. Cho, and S. J. Zhang. 2016. “Integrating work sequences and temporary structures into safety planning: Automated scaffolding-related safety hazard identification and prevention in BIM.” Autom. Constr. 70 (Oct): 128–142. https://doi.org/10.1016/j.autcon.2016.06.012.
Lee, H. S., H. Kim, M. Park, E. A. L. Teo, and K. P. Lee. 2012. “Construction risk assessment using site influence factors.” J. Comput. Civ. Eng. 26 (3): 319–330. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000146.
Lin, Y. S., H. Yu, G. Sun, and P. H. Shi. 2016. “Lift path planning without prior picking/placing configurations: Using crane location regions.” J. Comput. Civ. Eng. 30 (1): 04014109. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000437.
Liu, W. Z., and Y. F. Luo. 2015. “Uniform stiffness criterion of single-layer spherical shells based on nodal well-formedness.” [In Chinese.] J. Build. Struct. 36 (11): 38–45. https://doi.org/10.14006/j.jzjgxb.2015.11.005.
Lu, M. F., and J. H. Ye. 2017. “Guided genetic algorithm for dome optimization against instability with discrete variables.” J. Constr. Steel Res. 139 (Dec): 149–156. https://doi.org/10.1016/j.jcsr.2017.09.019.
Ma, M. X., V. W. Y. Tam, K. N. Le, and W. G. Li. 2020. “Challenges in current construction and demolition waste recycling: A China study.” Waste Manage. 118 (Dec): 610–625. https://doi.org/10.1016/j.wasman.2020.09.030.
Mizutani, R. 2011. “Jack down building demolition method-KC & D (the Kajima Cut and TakeDown Method).” J. Soc. Mech. Eng. 114 (1111): 424–425. https://doi.org/10.1299/jsmemag.114.1111_424.
Queheille, E., F. Taillandier, and N. Saiyouri. 2019. “Optimization of strategy planning for building deconstruction.” Autom. Constr. 98 (Feb): 236–247. https://doi.org/10.1016/j.autcon.2018.11.007.
Rahami, H., A. Kaveh, and Y. Gholipour. 2008. “Sizing, geometry and topology optimization of trusses via force method and Genetic Algorithm.” Eng. Struct. 30 (9): 2360–2369. https://doi.org/10.1016/j.engstruct.2008.01.012.
RazaviAlavi, S., and S. AbouRizk. 2019. “Site layout and construction plan optimization using an integrated genetic algorithm simulation framework.” J. Comput. Civ. Eng. 31 (4): 04017011. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000653.
Shen, S. Z. 1998. “The development of the long-span spatial structures-review and prospect.” [In Chinese.] China Civ. Eng. J. 31 (3): 5–14. https://doi.org/10.15951/j.tmgcxb.1998.03.001.
Su, Y., Y. Wu, W. Ji, and X. Y. Sun. 2020. “Computational morphogenesis of free-form grid structures with Voronoi diagram.” Comput.-Aided Civ. Infrastruct. Eng. 36 (3): 318–330. https://doi.org/10.1111/mice.12621.
Tian, L. M., J. P. Hao, J. P. Wei, and J. Zheng. 2016. “Integral lifting simulation of long-span spatial steel structures during construction.” Autom. Constr. 70 (Oct): 156–166. https://doi.org/10.1016/j.autcon.2016.06.015.
Wang, Z. C., Z. G. Cao, F. Fan, and Y. Sun. 2021. “Shape optimization of free-form grid structures based on the sensitivity hybrid multi-objective evolutionary algorithm.” J. Build. Eng. 44 (Dec): 102538. https://doi.org/10.1016/j.jobe.2021.102538.
Xiao, J. Z., L. Zeng, B. Xia, and T. Ding. 2022. “Theoretical framework and fundamental method for deconstruction engineering.” [In Chinese.] J. Build. Eng. 43 (2): 197–206. https://doi.org/10.14006/j.jzjgxb.2020.0578.
Yahya, M., and M. P. Saka. 2014. “Construction site layout planning using multi-objective artificial bee colony algorithm with Levy flights.” Autom. Constr. 38 (Mar): 14–29. https://doi.org/10.1016/j.autcon.2013.11.001.
Yang, J. Q., Y. Wu, G. Y. Zhou, and G. Y. Xin. 2023. “The dismantling method of wheel-spoke cable-strut tension structures based on experimental and numerical study.” Structures 48 (Feb): 1949–1963. https://doi.org/10.1016/j.istruc.2023.01.082.
Yang, Y. Q., L. Xu, and C. Y. Hu. 1994. “Extended adjacency matrix indexes and their applications.” J. Chem. Inf. Comput. Sci. 34 (5): 1140–1145. https://doi.org/10.1021/ci00021a020.
Yu, W., B. Z. Li, H. Y. Jia, M. Zhang, and D. Wang. 2015. “Application of multi-objective genetic algorithm to optimize energy efficiency and thermal comfort in building design.” Energy Build. 88 (Feb): 135–143. https://doi.org/10.1016/j.enbuild.2014.11.063.
Zhang, Z. Q., and W. Pan. 2020. “Lift planning and optimization in construction: A thirty-year review.” Autom. Constr. 118 (Oct): 103271. https://doi.org/10.1016/j.autcon.2020.103271.
Zhou, C. L., X. W. Li, J. K. Sun, B. Y. Xie, and Y. G. Wu. 2019. “Lift monitoring and analysis of multi-storey corridors in buildings.” Autom. Constr. 106 (Oct): 102902. https://doi.org/10.1016/j.autcon.2019.102902.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Sep 18, 2023
Accepted: Apr 17, 2024
Published online: Jul 12, 2024
Published in print: Sep 1, 2024
Discussion open until: Dec 12, 2024
ASCE Technical Topics:
- Architectural engineering
- Buildings
- Construction engineering
- Construction methods
- Demolition
- Design (by type)
- Engineering fundamentals
- Grid systems
- Lattices
- Mathematical functions
- Mathematics
- Matrix (mathematics)
- Structural design
- Structural engineering
- Structural safety
- Structural systems
- Structures (by type)
- Systems engineering
- Systems management
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.