Speed-Based Reliability Analysis of 3D Highway Alignments Passing through Two-Lane Mountainous Terrain
Publication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 8, Issue 4
Abstract
The present highway geometric design is governed by design speed and considers all other variables such as terrain, roadway, and driver characteristics as deterministic. The behavior of road users can be impulsive, and there is always an element of uncertainty; it requires the introduction of reliability ideas into highway design. Reliability analysis is one method that explains the uncertainty in the geometric design process and assesses the risk related to a particular design feature. The study selected 38 curves with variable geometry located along National Highway 953 (NH-953) in India’s hilly terrains. A total of 13,680 samples of speed data (360 data points for one curve) were collected using the radar gun at the curve midpoint. The first-order reliability method was used to calculate the reliability index () and probability of noncompliance (). The results showed that the of a car is less than heavy commercial vehicles (HCV), and the corresponding was higher for a car than HCV. Since HCV is moving slower than a car, the safety margin (difference between design and vehicle mean speeds) is more, and is less. Further, the vehicle mean speed increases, the safety margin decreases, and the resultant of the curves decreases ( increases). Therefore, the chances of crashes are increased. Also, cars have 30% to 32% higher than HCV. Additionally, the Tobit regression approach was used to develop a model. The results revealed that deflection angle is positively correlated while curve length, tangent length, , and total crashes negatively correlate with . Lastly, the developed safety warrants are helpful for the highway authority to identify the unreliable highway segment and provide safety measures to increase the reliability of the segment and reduce the likelihood of crashes.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The data (curve geometry, vehicle speed, and crash data), model or codes created or used throughout the study are available from the corresponding author by reasonable request.
Acknowledgments
The authors are grateful to the TEQIP-III, a Government of India initiative, for sponsoring this project. The project is entitled “Influence of Geometric Design Consistency and Functional Condition of Road on Vehicle’s Operational Characteristics in Mountainous Regions” (Project No. SVNIT/CED/SSA/TEQIP-III/44/2019). The authors thank the National Highways Authority of India (NHAI) for providing the highway section plan and profile data and the police authority for providing crash data. We also thank all individuals who helped collect the speed data (P. Chaudhari, S. Bhardva, C. Akbari, P. Patil, H. R. Surya, P. Diyora, R. Italiya, J. Mistry, R. Rathod, S. Bharadva, and Y. Ali).
References
Afolayan, A., E. A. Oluwasola, and O. S. Abiola. 2019. “Reliability approach to highway geometric design: A methodical review.” In Proc., Int. Conf. of Engineering and Environmental Technology, 62–79. Padang, Indonesia: Universitas Negeri Padang.
Alsaleh, R., T. Sayed, K. Ismail, and F. AlRukaibi. 2020. “System reliability as a surrogate measure of safety for horizontal curves: Methodology and case studies.” Transp. A Transp. Sci. 16 (3): 957–986. https://doi.org/10.1080/23249935.2020.1720859.
Ben-Akiva, M., M. Hirshe, and J. Prashker. 1985. “Probabilistic and economic factors in highway geometric design.” Transp. Sci. 19 (1): 38–57. https://doi.org/10.1287/trsc.19.1.38.
Debnath, A. K., R. Blackman, and N. Haworth. 2014. “A Tobit model for analyzing speed limit compliance in work zones.” Saf. Sci. 70 (Dec): 367–377. https://doi.org/10.1016/j.ssci.2014.07.012.
Dhahir, B., and Y. Hassan. 2016. “Reliability-based design of horizontal curves on two-lane rural highways.” Transp. Res. Rec. 2588 (1): 22–31. https://doi.org/10.3141/2588-03.
Dhahir, B., and Y. Hassan. 2019a. “Framework for reliability-based, safety-explicit horizontal curve design using naturalistic driving data.” Transp. Res. Rec. 2673 (4): 605–615. https://doi.org/10.1177/0361198119838853.
Dhahir, B., and Y. Hassan. 2019b. “Probabilistic, safety-explicit design of horizontal curves on two-lane rural highways based on reliability analysis of naturalistic driving data.” Accid. Anal. Prev. 123 (Feb): 200–210. https://doi.org/10.1016/j.aap.2018.11.024.
Easa, S. M. 2000. “Reliability approach to intersection sight distance design.” Transp. Res. Rec. J. Transp. Res. Board 1701 (1): 42–52. https://doi.org/10.3141/1701-06.
Echaveguren, T., M. Bustos, and H. de Solminihac. 2005. “Assessment of horizontal curves of an existing road using reliability concepts.” Can. J. Civ. Eng. 32 (6): 1030–1038. https://doi.org/10.1139/l05-056.
El Koury, J., and A. G. Hobeika. 2007. “Assessing the risk in the design of passing sight distances.” J. Transp. Eng. 133 (6): 370–377. https://doi.org/10.1061/(ASCE)0733-947X(2007)133:6(370).
Emmanuel, L. F. 1996. Reliability based design for roadway horizontal curves. Vancouver, BC, Canada: Univ. of British Columbia.
Essa, M., T. Sayed, and M. Hussein. 2016. “Multi-mode reliability-based design of horizontal curves.” Accid. Anal. Prev. 93 (Aug): 124–134. https://doi.org/10.1016/j.aap.2016.04.023.
Goyani, J., S. Bharadva, S. Arkatkar, and G. Joshi. 2022a. “Reliability-based analysis of sight distance for highway safety in hilly terrain.” In Proc., 2022 14th Int. Conf. on Communication Systems, 842–847. New York: IEEE. https://doi.org/10.1109/comsnets53615.2022.9668566.
Goyani, J., P. Chaudhari, S. Arkatkar, G. Joshi, and S. M. Easa. 2022b. “Operating speed prediction models by vehicle type on two-lane rural highways in Indian hilly terrains.” J. Transp. Eng. Part A Syst. 148 (3): 04022001. https://doi.org/10.1061/JTEPBS.0000644.
Gressai, M., B. Varga, T. Tettamanti, and I. Varga. 2021. “Investigating the impacts of urban speed limit reduction through microscopic traffic simulation.” Commun. Transp. Res. 1 (Dec): 100018. https://doi.org/10.1016/j.commtr.2021.100018.
Habib, K., M. Gouda, and K. El-Basyouny. 2020. “Calibrating design guidelines using mental workload and reliability analysis.” Transp. Res. Rec. 2674 (8): 360–369. https://doi.org/10.1177/0361198120928075.
Hauer, E. 1999. “Safety and the choice of degree of curve.” Transp. Res. Rec. J. Transp. Res. Board 1665 (1): 22–27. https://doi.org/10.3141/1665-04.
Himes, S., and E. Donnell. 2020. “Safety effects of horizontal curve reliability index.” Transp. Res. Rec. 2674 (9): 627–636. https://doi.org/10.1177/0361198120930715.
Himes, S. C., and E. T. Donnell. 2014. “Reliability approach to horizontal curve design.” Transp. Res. Rec. 2436 (1): 51–59. https://doi.org/10.3141/2436-06.
Hou, Q., X. Huo, and J. Leng. 2020. “A correlated random parameters Tobit model to analyze the safety effects and temporal instability of factors affecting crash rates.” Accid. Anal. Prev. 134 (Jan): 105326. https://doi.org/10.1016/j.aap.2019.105326.
Hussein, M., T. Sayed, K. Ismail, and A. Van Espen. 2014. “Calibrating road design guides using risk-based reliability analysis.” J. Transp. Eng. 140 (9): 04014041. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000694.
Ibrahim, S., and T. Sayed. 2011. “Developing safety performance functions incorporating reliability-based risk measures.” Accid. Anal. Prev. 43 (6): 2153–2159. https://doi.org/10.1016/j.aap.2011.06.006.
Ibrahim, S. E., T. Sayed, and K. Ismail. 2012. “Methodology for safety optimization of highway cross-sections for horizontal curves with restricted sight distance.” Accid. Anal. Prev. 49 (Nov): 476–485. https://doi.org/10.1016/j.aap.2012.03.016.
IRC (Indian Road Congress). 2010. Code of practice for road signs. IRC: 67-2010. New Delhi, India: IRC.
IRC (Indian Road Congress). 2018. Guidelines for traffic calming measures in urban and rural areas. IRC: 99-2018. New Delhi, India: IRC.
IRC (Indian Road Congress). 2019. Guidelines for the alignment survey and geometric design of hill roads. IRC: 52-2019. New Delhi, India: IRC.
Ismail, K., and T. Sayed. 2010. “Risk-based highway design: Case studies from British Columbia, Canada.” Transp. Res. Rec. 2195 (1): 3–13. https://doi.org/10.3141/2195-01.
Ismail, K., and T. Sayed. 2012. “Risk-optimal highway design: Methodology and case studies.” Saf. Sci. 50 (7): 1513–1521. https://doi.org/10.1016/j.ssci.2012.02.001.
Jacob, A., and M. V. L. R. Anjaneyulu. 2013. “Operating speed of different classes of vehicles at horizontal curves on two-lane rural highways.” J. Transp. Eng. 139 (3): 287–294. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000503.
Jesna, N. M., and M. V. L. R. Anjaneyulu. 2016. “Reliability analysis of horizontal curves on two lane highways.” Transp. Res. Procedia 17 (2016): 107–115. https://doi.org/10.1016/j.trpro.2016.11.066.
Lamm, R., E. M. Choueiri, and T. Mailaender. 1990. “Comparison of operating speed on dry and wet pavements of two lane rural highways.” Transp. Res. Rec. 1280 (1): 199–207.
Lamm, R., A. K. Guenther, and E. M. Choueiri. 1995. “Safety module for highway geometric design.” Transp. Res. Rec. 1512 (1): 7–15.
Lee, J., M. Abdel-Aty, and I. Shah. 2019. “Evaluation of surrogate measures for pedestrian trips at intersections and crash modeling.” Accid. Anal. Prev. 130 (Sep): 91–98. https://doi.org/10.1016/j.aap.2018.05.015.
Maji, A., G. Sil, and A. Tyagi. 2018. “85th and 98th percentile speed prediction models of car, light, and heavy commercial vehicles for four-lane divided rural highways.” J. Transp. Eng. Part A Syst. 144 (5): 1–8. https://doi.org/10.1061/JTEPBS.0000136.
Maji, A., and A. Tyagi. 2018. “Speed prediction models for car and sports utility vehicle at locations along four-lane median divided horizontal curves.” J. Mod. Transp. 26 (4): 278–284. https://doi.org/10.1007/s40534-018-0162-1.
Malaghan, V., D. S. Pawar, and H. Dia. 2021. “Modeling acceleration and deceleration rates for two-lane rural highways using global positioning system data.” J. Adv. Transp. 2021: 6630876. https://doi.org/10.1155/2021/6630876.
Musunuru, A., R. J. Porter, T. Sayed, and M. Fyfe. 2019. “Risk and reliability analysis of geometric design criteria: A critical synthesis.” Transp. Res. Rec. 2673 (3): 386–398. https://doi.org/10.1177/0361198119834298.
Navin, F. P. D. 1990. “Safety factors for road design: Can they be estimated?” Transp. Res. Board 1280: 181–189.
Navin, F. P. D. 1992. “Reliability indices for road geometric design.” Can. J. Civ. Eng. 19 (5): 760–766. https://doi.org/10.1139/l92-087.
Oh, H., and S. Mun. 2012. “Design speed based reliability index model for roadway safety evaluation.” KSCE J. Civ. Eng. 16 (5): 845–854. https://doi.org/10.1007/s12205-012-1469-9.
Rackwitz, R. 2001. “Reliability analysis—A review and some perspectives.” Struct. Saf. 23 (4): 365–395. https://doi.org/10.1016/S0167-4730(02)00009-7.
Richl, L., and T. Sayed. 2006. “Evaluating the safety risk of narrow medians using reliability analysis.” J. Transp. Eng. 132 (5): 366–375. https://doi.org/10.1061/(ASCE)0733-947X(2006)132:5(366).
Santos-Berbe, C., M. Essa, T. Sayed, and M. Castro. 2017. “Reliability-based analysis of sight distance modelling for traffic safety.” J. Adv. Transp. 2017 (May): 5612849. https://doi.org/10.1155/2017/5612849.
Sarhan, M., and Y. Hassan. 2008. “Three-dimensional, probabilistic highway design sight distance application.” Transp. Res. Rec. 2060 (1): 10–18. https://doi.org/10.3141/2060-02.
Shalkamy, A., and K. El-Basyouny. 2020a. “Investigating the relationship between safety and reliability outcomes with multivariate models and LiDAR data: A case study of horizontal curves with insufficient sight distance.” In Proc., 99th Annual Meeting of the Transportation Research Board. Washington, DC: Transportation Research Board.
Shalkamy, A., and K. El-Basyouny. 2020b. “Multivariate models to investigate the relationship between collision risk and reliability outcomes on horizontal curves.” Accid. Anal. Prev. 147 (Nov): 105745. https://doi.org/10.1016/j.aap.2020.105745.
Shalkamy, A., S. Gargoum, and K. El-Basyouny. 2021. “Towards a more inclusive and safe design of horizontal curves: Exploring the association between curve features, reliability measures, and safety.” Accid. Anal. Prev. 153 (Apr): 106009. https://doi.org/10.1016/j.aap.2021.106009.
Shin, J., and I. Lee. 2015. “Reliability-based vehicle assessment and design optimization of roadway radius and speed limit in windy environments.” Eng. Optim. 47 (5): 622–641. https://doi.org/10.1080/0305215X.2014.908871.
Sigelman, L., and L. Zeng. 2000. “Analyzing censored and sample-selected data with Tobit and Heckit models.” Polit. Anal. 8 (2): 167–182. https://doi.org/10.1093/oxfordjournals.pan.a029811.
Tobin, J. 1958. “Estimation of relationships for limited dependent variables.” Econometrica 26 (1): 24–36. https://doi.org/10.2307/1907382.
Wali, B., A. J. Khattak, and N. Ahmad. 2019. “Examining correlations between motorcyclist’s conspicuity, apparel related factors and injury severity score: Evidence from new motorcycle crash causation study.” Accid. Anal. Prev. 131 (Oct): 45–62. https://doi.org/10.1016/j.aap.2019.04.009.
Wang, J., J. Wu, and Y. Li. 2015. “The driving safety field based on driver-vehicle-road interactions.” IEEE Trans. Intell. Transp. Syst. 16 (4): 2203–2214. https://doi.org/10.1109/TITS.2015.2401837.
Wong, Y. D., and A. Nicholson. 1992. “Driver behaviour at horizontal curves: Risk compensation and the margin of safety.” Accid. Anal. Prev. 24 (4): 425–436. https://doi.org/10.1016/0001-4575(92)90053-L.
You, K., L. Sun, and W. Gu. 2012. “Reliability-based risk analysis of roadway horizontal curves.” J. Transp. Eng. 138 (8): 1071–1081. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000402.
Zeng, Q., H. Wen, H. Huang, and M. Abdel-Aty. 2017. “A Bayesian spatial random parameters Tobit model for analyzing crash rates on roadway segments.” Accid. Anal. Prev. 100 (Mar): 37–43. https://doi.org/10.1016/j.aap.2016.12.023.
Zhang, Z., and X. Yang. 2021. “Analysis of highway performance under mixed connected and regular vehicle environment.” J. Intell. Connected Veh. 4 (2): 68–79. https://doi.org/10.1108/JICV-10-2020-0011.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Mar 17, 2022
Accepted: Jun 12, 2022
Published online: Aug 26, 2022
Published in print: Dec 1, 2022
Discussion open until: Jan 26, 2023
ASCE Technical Topics:
- Automobiles
- Business management
- Curvature
- Design (by type)
- Engineering fundamentals
- Geography
- Geomatics
- Geometrics
- Geometry
- Highway and road design
- Highway transportation
- Infrastructure
- Mathematics
- Practice and Profession
- Public administration
- Public health and safety
- Safety
- Terrain
- Traffic accidents
- Traffic engineering
- Traffic management
- Transportation engineering
- Vehicles
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Shalini Rankavat, Akanksha Garg, Reliability Analysis for Horizontal Curves with Crashes: Case Study in New Delhi, India, Journal of Transportation Engineering, Part A: Systems, 10.1061/JTEPBS.TEENG-8045, 150, 9, (2024).
- Jaydip Goyani, Rohan Mali, Anjana Ramesh, Kallypalli Saimadhu, Sachin Elango, Shriniwas Arkatkar, Influence of Curve Geometry Factors on Driver’s Speed Decision Making When Passing through a Horizontal Curve, Journal of Transportation Engineering, Part A: Systems, 10.1061/JTEPBS.TEENG-7919, 150, 1, (2024).
- Apratim Datta, Gourab Sil, Avijit Maji, Modified Reliability Theory for Speed-Based Evaluation of Successive Geometric Elements, Journal of Transportation Engineering, Part A: Systems, 10.1061/JTEPBS.TEENG-7733, 150, 3, (2024).
- Jaydip Goyani, Shriniwas Arkatkar, Gaurang Joshi, Said Easa, Modified Geometric Design Consistency Criteria for Two-Lane Rural Highways Based On Crash Severity, Transportation Research Record: Journal of the Transportation Research Board, 10.1177/03611981231179469, 2678, 3, (279-291), (2023).
- Jaydip Goyani, Shriniwas Arkatkar, Gaurang Joshi, Said Easa, Modeling car and heavy commercial vehicle crashes on two-lane rural highways using the Poisson-Tweedie regression approach, Journal of Transportation Safety & Security, 10.1080/19439962.2023.2278063, (1-22), (2023).
- Vinay Kumar Sharma, Gourab Sil, Design Consistency Evaluation Tools for Rural Highways: A Review, Recent Advances in Traffic Engineering, 10.1007/978-981-99-4464-4_5, (69-88), (2023).
- Mikshu Bhatt, Rushiraj Gohil, Apoorva Gupta, Jaydip Goyani, Shriniwas Arkatkar, Distance-Based Speed Prediction Models Using Naturalistic Driving Data on Two-Lane Roads in Mountainous Regions, Recent Advances in Traffic Engineering, 10.1007/978-981-99-4464-4_24, (373-385), (2023).