A Practical Bayesian Framework for Structural Model Updating and Prediction
Publication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 8, Issue 1
Abstract
Due to the influence of various uncertain factors, there will inevitably be certain errors between the prediction of finite-element (FE) model and observed data for a target structure. It is thus necessary to calibrate the initial FE model using the measured data to ensure the accuracy of the numerical model for the purpose of structural system identification and health monitoring. Although structural FE model updating methods have been extensively studied in the past few decades, the research based on deterministic methods in the current literature still occupies a large proportion, which cannot account for the uncertain effects during the model updating. The noise robustness of both the updating procedure and the generalization capability of the updated model are expected to be poor. The model updating based on the Bayesian theorem can quantify the uncertainty of model identification results, but it is computationally expensive for the Bayesian inference of regularization hyperparameters since the Hessian matrix is generally required to be evaluated repeatedly especially for a huge amount of uncertain model parameters. Also, effective prediction based on the refined FE model is still lacking in the literature, which is essential for judging and evaluating the quality of the updated model. This paper proposes a practical framework for structural FE model updating and prediction based on the Bayesian regularization with incomplete modal data. The structural model parameters and regularization hyperparameters are identified alternatively in an adaptive manner, and the Gauss-Newton method is used to approximate the true Hessian within the framework of the nonlinear least-squares algorithm. This is expected to improve the efficiency and robustness of model updating and prediction for handling large-scale FE models possessing a large number of uncertain model parameters. The proposed methodology is validated through the model updating and prediction conducted on a real-life pedestrian bridge based on field-testing data.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All measured data that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The author gratefully acknowledges the financial support provided by the National Natural Science Foundation of China (Grant No. 51778506) and the Scientific Research Fund of Institute of Engineering Mechanics, China Earthquake Administration (Grant No. 2019EEEVL0401). The author would also like to thank the editor and the anonymous reviewers for their constructive comments and valuable suggestions to improve the quality of the article.
References
Alkayem, N. F., M. S. Cao, Y. F. Zhang, M. Bayat, and Z. Q. Su. 2018. “Structural damage detection using finite element model updating with evolutionary algorithms: A survey.” Neural Comput. Appl. 30 (2): 389–411. https://doi.org/10.1007/s00521-017-3284-1.
Au, S. K. 2012. “Connecting Bayesian and frequentist quantification of parameter uncertainty in system identification.” Mech. Syst. Signal Process. 29 (May): 328–342. https://doi.org/10.1016/j.ymssp.2012.01.010.
Bansal, S., and S. H. Cheung. 2017. “Stochastic simulation algorithm for robust reliability updating of structural dynamic systems based on incomplete modal data.” ASCE-ASME J. Risk Uncertainty Eng. Syst. Part A: Civ. Eng. 3 (4): 04017008. https://doi.org/10.1061/AJRUA6.0000911.
Bartilson, D. T., J. Jang, and A. W. Smyth. 2019. “Finite element model updating using objective-consistent sensitivity-based parameter clustering and Bayesian regularization.” Mech. Syst. Signal Process. 114 (Jan): 328–345. https://doi.org/10.1016/j.ymssp.2018.05.024.
Beck, J. L., and L. S. Katafygiotis. 1998. “Updating models and their uncertainties I: Bayesian statistical framework.” J. Eng. Mech. 124 (4): 455–461. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:4(455).
Behmanesh, I., B. Moaveni, G. Lombaert, and C. Papadimitriou. 2015. “Hierarchical Bayesian model updating for structural identification.” Mech. Syst. Signal Process. 64–65 (Dec): 360–376. https://doi.org/10.1016/j.ymssp.2015.03.026.
Ben-Haim, Y., S. Cogan, and L. Sanseigne. 1998. “Usability of mathematical models in mechanical decision processes.” Mech. Syst. Signal Process. 12 (1): 121–134. https://doi.org/10.1006/mssp.1996.0137.
Bishop, C. M. 2006. Pattern recognition and machine learning. Berlin: Springer.
Brincker, R., L. Zhang, and P. Andersen. 2001. “Modal identification of output-only systems using frequency domain decomposition.” Smart Mater. Struct. 10 (3): 441–445. https://doi.org/10.1088/0964-1726/10/3/303.
Coleman, T. F., and Y. Li. 1996. “An interior trust region approach for nonlinear minimization subject to bounds.” SIAM J. Optim. 6 (2): 418–445. https://doi.org/10.1137/0806023.
Ehsan, F. E., and A. Hasan. 2018. “A method for estimating Hill function-based dynamic models of gene regulatory networks.” R. Soc. Open Sci. 5 (2): 171226. https://doi.org/10.1098/rsos.171226.
Foresee, F. D., and M. T. Hagan. 1997. “Gauss-Newton approximation to Bayesian learning.” In Proc., 1997 Int. Joint Conf. on Neural Networks, 1930–1935. New York: IEEE. https://doi.org/10.1109/ICNN.1997.611621.
Friswell, M. I., and J. E. Mottershead. 1995. Finite element model updating in structural dynamics. Dordrecht, Netherlands: Kluwer Academic Publishers.
Fritzen, C. P., D. Jennewein, and T. Kiefer. 1998. “Damage detection based on model updating methods.” Mech. Syst. Signal Process. 12 (1): 163–186. https://doi.org/10.1006/mssp.1997.0139.
Hu, J., H. F. Lam, and J. H. Yang. 2018. “Operational modal identification and finite element model updating of a coupled building following Bayesian approach.” Struct. Control Health 25 (2): e2089. https://doi.org/10.1002/stc.2089.
Huang, Y., C. S. Shao, B. Wu, J. L. Beck, and H. Li. 2018. “State-of-the-art review on Bayesian inference in structural system identification and damage assessment.” Adv. Struct. Eng. 22 (6): 1329–1351. https://doi.org/10.1177/1369433218811540.
Imregun, M., and W. J. Visser. 1991. “A review of model updating techniques.” Shock Vib. Digest 23 (1): 9–20. https://doi.org/10.1177/058310249102300102.
Lam, H. F., J. Yang, and S. K. Au. 2015. “Bayesian model updating of a coupled-slab system using field test data utilizing an enhanced Markov chain Monte Carlo simulation algorithm.” Eng. Struct. 102 (Nov): 144–155. https://doi.org/10.1016/j.engstruct.2015.08.005.
Moré, J. J. 1978. “The Levenberg-Marquardt algorithm: Implementation and theory.” In Numerical analysis, edited by G. A. Watson, 105–116. Berlin: Springer.
Mottershead, J. E., and M. I. Friswell. 1993. “Model updating in structural dynamics: A survey.” J. Sound Vib. 167 (2): 347–375. https://doi.org/10.1006/jsvi.1993.1340.
Mthembu, L., T. Marwala, M. I. Friswell, and S. Adhikari. 2011. “Model selection in finite element model updating using the Bayesian evidence statistic.” Mech. Syst. Signal Process. 25 (7): 2399–2412. https://doi.org/10.1016/j.ymssp.2011.04.001.
Papadimitriou, C., J. L. Beck, and L. S. Katafygiotis. 1997. “Asymptotic expansions for reliability and moments of uncertain systems.” J. Eng. Mech. 123 (12): 1219–1229. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:12(1219).
Sehgal, S., and H. Kumar. 2016. “Structural dynamic model updating techniques: A state of the art review.” Arch. Comput. Methods Eng. 23 (3): 515–533. https://doi.org/10.1007/s11831-015-9150-3.
Simoen, E., G. De Roeck, and G. Lombaert. 2015. “Dealing with uncertainty in model updating for damage assessment: A review.” Mech. Syst. Signal Process. 56–57 (11): 123–149. https://doi.org/10.1016/j.ymssp.2014.11.001.
Teughels, A., and G. De Roeck. 2005. “Damage detection and parameter identification by finite element model updating.” Arch. Comput. Methods Eng. 12 (2): 123–164. https://doi.org/10.1007/BF03044517.
Vanik, M. W., J. L. Beck, and S. K. Au. 2000. “Bayesian probabilistic approach to structural health monitoring.” J. Eng. Mech. 126 (7): 738–745. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:7(738).
Yin, T., and H. P. Zhu. 2018. “Probabilistic damage detection of a steel truss bridge model by optimally designed Bayesian neural network.” Sensors 18 (10): 3371. https://doi.org/10.3390/s18103371.
Yin, T., and H. P. Zhu. 2020. “An efficient algorithm for architecture design of Bayesian neural network in structural model updating.” Comput.-Aided Civ. Infrastruct. Eng. 35 (4): 354–372. https://doi.org/10.1111/mice.12492.
Yin, T., H. P. Zhu, and S. J. Fu. 2019. “Model selection for dynamic reduction-based structural health monitoring following the Bayesian evidence approach.” Mech. Syst. Signal Process. 127 (Jul): 306–327. https://doi.org/10.1016/j.ymssp.2019.03.009.
Yu, L., and T. Yin. 2010. “Damage identification in frame structures based on FE model updating.” J. Vib. Acoust. 132 (5): 051007. https://doi.org/10.1115/1.4002125.
Yuen, K. V., J. L. Beck, and L. S. Katafygiotis. 2006. “Efficient model updating and health monitoring methodology using incomplete modal data without mode matching.” Struct. Control Health Monit. 13 (1): 91–107. https://doi.org/10.1002/stc.144.
Yuen, K. V., S. C. Kuok, and L. Dong. 2019. “Self-calibrating Bayesian real-time system identification.” Comput.-Aided Civ. Infrastruct. Eng. 34 (9): 806–821. https://doi.org/10.1111/mice.12441.
Yuen, K. V., and G. A. Ortiz. 2017. “Multiresolution Bayesian nonparametric general regression for structural model updating.” Struct. Control Health Monit. 25 (2): e2077. https://doi.org/10.1002/stc.2077.
Zhang, F. L., Y. C. Ni, and H. F. Lam. 2017. “Bayesian structural model updating using ambient vibration data collected by multiple setups.” Struct. Control Health Monit. 24 (12): e2023. https://doi.org/10.1002/stc.2023.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Dec 19, 2020
Accepted: Sep 8, 2021
Published online: Oct 20, 2021
Published in print: Mar 1, 2022
Discussion open until: Mar 20, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- B. Li, P. Wang, Z. Zhu, Z. Li, Y. Xiao, Ambient Vibration Test and Retest of a Multistory Factory Building, Journal of Performance of Constructed Facilities, 10.1061/JPCFEV.CFENG-4662, 38, 4, (2024).
- Taro Yaoyama, Tatsuya Itoi, Jun Iyama, Stress Resultant–Based Approach to Mass Assumption–Free Bayesian Model Updating of Frame Structures, ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 10.1061/AJRUA6.RUENG-1314, 10, 4, (2024).
- Jaecheon Kim, Manseok Han, Soobong Shin, Development of a Mutation Operator in a Real-Coded Genetic Algorithm for Bridge Model Optimization, KSCE Journal of Civil Engineering, 10.1007/s12205-024-2480-7, 28, 5, (1822-1835), (2024).
- Wang-Ji Yan, Zhou-Quan Feng, Wen Yang, Ka-Veng Yuen, Bayesian inference for the dynamic properties of long-span bridges under vortex-induced vibration with Scanlan’s model and dense optical flow scheme, Mechanical Systems and Signal Processing, 10.1016/j.ymssp.2022.109078, 174, (109078), (2022).