Reliability-Based Assessment of LTF and CLT Shear Walls under In-Plane Seismic Loading Using a Modified Bouc-Wen Hysteresis Model
Publication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 7, Issue 4
Abstract
This paper reports on the reliability-based assessment of light timber frame (LTF) and cross-laminated timber (CLT) shear walls. The outcomes of cyclic tests on 17 timber shear wall specimens calibrate the parameters of a modified Bouc-Wen model [extended energy-dependent generalized Bouc-Wen (EEGBW)] obtained from the extension of the generalized Bouc-Wen (GBW) model. The EEGBW model, which is an alternative to the Bouc-Wen-Baber-Noori (BWBN) one, accurately, simulates the essential features of timber connections and structural systems. The EEGBW model, representative of the global response of the shear wall, expresses the resisting term of a single-degree-of-freedom dynamic system, which describes the seismic response of a lumped mass supported by the shear walls. The results of truncated incremental dynamic analysis in terms of maximum displacement lead to the failure probabilities associated with increasing intensity measures. The resulting failure probabilities, fitted by a lognormal probability function, deliver the so-called fragility functions of the 17 structural archetypes by assuming three different mass values. The failure probabilities return the estimation of the reliability indexes, which quantitatively assess the seismic reliability of the considered structures. Additionally, the authors discuss the role of the top mass and its effects upon the shear walls’ seismic performance by comparing the LTF and CLT structural systems.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors acknowledge the research efforts of Paolo Grossi, Paolo Endrizzi, Tiziano Sartori, and Ermanno Acler, who carried out the experimental tests with the support of the staff of the University of Trento.
References
Aloisio, A., R. Alaggio, and M. Fragiacomo. 2019. “Dynamic identification of a masonry façade from seismic response data based on an elementary ordinary least squares approach.” Eng. Struct. 197 (Oct): 109415. https://doi.org/10.1016/j.engstruct.2019.109415.
Aloisio, A., R. Alaggio, and M. Fragiacomo. 2020a. “Fragility functions and behavior factors estimation of multi-story cross-laminated timber structures characterized by an energy-dependent hysteretic model.” Earthquake Spectra. https://doi.org/10.1177/8755293020936696.
Aloisio, A., R. Alaggio, J. Köhler, and M. Fragiacomo. 2020b. “Extension of generalized Bouc-Wen hysteresis modeling of wood joints and structural systems.” J. Eng. Mech. 146 (3): 04020001. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001722.
Aloisio, A., and M. Fragiacomo. 2021. “Reliability-based overstrength factors of cross-laminated timber shear walls for seismic design.” Eng. Struct. 228 (Feb): 111547. https://doi.org/10.1016/j.engstruct.2020.111547.
Aloisio, A., D. Pasca, R. Tomasi, and M. Fragiacomo. 2020c. “Dynamic identification and model updating of an eight-storey CLT building.” Eng. Struct. 213 (Jun): 110593. https://doi.org/10.1016/j.engstruct.2020.110593.
Baker, J. W. 2015. “Efficient analytical fragility function fitting using dynamic structural analysis.” Earthquake Spectra 31 (1): 579–599. https://doi.org/10.1193/021113EQS025M.
Brandner, R. 2013. “Production and technology of cross laminated timber (CLT): A state-of-the-art report.” In Proc., Focus Solid Timber Solutions—European Conf. on Cross Laminated Timber (CLT), 3–36. Bath, England: Univ. of Bath.
BSI (British Standards Institution). 2001. Timber structures. Test methods. Cyclic testing of joints made with mechanical fasteners. BS EN 12512:2001. London: BSI.
BSI (British Standards Institution). 2011. Timber structures—Test methods: Racking strength and stiffness of timber frame wall panels. BS EN 594:2011. London: BSI.
Ceccotti, A., and R. O. Foschi. 1999. “Reliability assessment of wood shear walls under earthquake excitation.” In Proc., 3rd Int. Conf. on Computational Stochastic Mechanics, 311–317. Rotterdam, Netherlands: A.A. Balkema.
Ceccotti, A., and A. Vignoli. 1989. “A hysteretic behavioural model for semi-rigid joints.” European Earthquake Eng. 3 (1): 3–9.
CEN (European Committee for Standardization). 2002. Eurocode—Basis of structural design. EN 1990:2002. Brussels, Belgium: CEN.
Ellingwood, B. R., D. V. Rosowsky, Y. Li, and J. H. Kim. 2004. “Fragility assessment of light-frame wood construction subjected to wind and earthquake hazards.” J. Struct. Eng. 130 (12): 1921–1930. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:12(1921).
Endrizzi, P. 2012. “I sistemi di connessione di base del pannello xlam compensato di tavole: Indagine sperimentale in scala reale e modellazione numerica della capacità portante globale di parete ottenuta con l’impiego di una nuova tipologia di angolare a taglio.” M.S. thesis, Dipartimento di Ingegneria Civile, Ambientale e Meccanica, Univ. of Trento.
Ferreira, F., C. Moutinho, Á. Cunha, and E. Caetano. 2020. “An artificial accelerogram generator code written in MATLAB.” Eng. Rep. 2 (3): e12129. https://doi.org/10.1002/eng2.12129.
Foliente, G. C. 1995. “Hysteresis modeling of wood joints and structural systems.” J. Struct. Eng. 121 (6): 1013–1022. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:6(1013).
Foliente, G. C., P. Paevere, T. Saito, and N. Kawai. 2000. “Reliability assessment of timber shear walls under earthquake loads.” In Proc., 12th World Conf. on Earthquake Engineering (12WCEE). Auckland, New Zealand: New Zealand Society for Earthquake Engineering.
Folz, B., and A. Filiatrault. 2001. “Cyclic analysis of wood shear walls.” J. Struct. Eng. 127 (4): 433–441. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:4(433).
Gardoni, P., A. Der Kiureghian, and K. M. Mosalam. 2002. “Probabilistic capacity models and fragility estimates for reinforced concrete columns based on experimental observations.” J. Eng. Mech. 128 (10): 1024–1038. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:10(1024).
Grossi, P., T. Sartori, and R. Tomasi. 2015. “Tests on timber frame walls under in-plane forces: Part 2.” Proc. Inst. Civ. Eng. 168 (11): 840–852. https://doi.org/10.1680/stbu.13.00108.
Gu, J. 2014. “Seismic reliability analysis of wood shear walls using different methods.” J. Struct. Eng. 140 (2): 04013054. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000841.
Gulvanessian, H., J.-A. Calgaro, and M. Holickỳ. 2002. Designer’s guide to EN 1990: Eurocode: Basis of structural design. London: Thomas Telford.
Kasal, B., M. Collins, G. C. Foliente, and P. Paevere. 1999. “A hybrid deterministic and stochastic approach to inelastic modeling and analysis of light-frame buildings.” In Proc., 1st Int. RILEM Symp. on Timber Engineering. Edited by L. Boström, 61–70. Paris: RILEM Publications SARL.
Kirkham, W. J., R. Gupta, and T. H. Miller. 2014. “State of the art: Seismic behavior of wood-frame residential structures.” J. Struct. Eng. 140 (4): 04013097. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000861.
NTC (Norme Tecniche per le Costruzioni). 2008. Decreto Ministeriale 17 gennaio. Rome: NTC.
OpenSees. 2021. “Sim center workshops and applications.” Accessed June 23, 2021. https://opensees.berkeley.edu/.
Rinaldin, G., C. Amadio, and M. Fragiacomo. 2013. “A component approach for the hysteretic behaviour of connections in cross-laminated wooden structures.” Earthquake Eng. Struct. Dyn. 42 (13): 2023–2042. https://doi.org/10.1002/eqe.2310.
Rosowsky, D. V. 2002. “Performance of timber buildings under high wind loads.” Prog. Struct. Mater. Eng. 4 (3): 286–290. https://doi.org/10.1002/pse.115.
Seim, W., M. Kramar, T. Pazlar, and T. Vogt. 2016. “OSB and GFB as sheathing materials for timber-framed shear walls: Comparative study of seismic resistance.” J. Struct. Eng. 142 (4): E4015004. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001293.
Song, J., and A. Der Kiureghian. 2006. “Generalized Bouc–Wen model for highly asymmetric hysteresis.” J. Eng. Mech. 132 (6): 610–618. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:6(610).
Vaidogas, E., and V. Juocevičius. 2008. “Reliability of a timber structure exposed to fire: Estimation using fragility function.” Mechanics 73 (5): 35–42.
van de Lindt, J. W., and M. A. Walz. 2003. “Development and application of wood shear wall reliability model.” J. Struct. Eng. 129 (3): 405–413. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:3(405).
Van De Lindt, J. W. 2004. “Evolution of wood shear wall testing, modeling, and reliability analysis: Bibliography.” Pract. Period. Struct. Des. Constr. 9 (1): 44–53. https://doi.org/10.1061/(ASCE)1084-0680(2004)9:1(44).
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Dec 8, 2020
Accepted: Apr 19, 2021
Published online: Sep 8, 2021
Published in print: Dec 1, 2021
Discussion open until: Feb 8, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Ying-Qing Guo, Meng Li, Yang Yang, Zhao-Dong Xu, Wen-Han Xie, A Particle-Swarm-Optimization-Algorithm-Improved Jiles–Atherton Model for Magnetorheological Dampers Considering Magnetic Hysteresis Characteristics, Information, 10.3390/info15020101, 15, 2, (101), (2024).
- Linzi Fan, Jialong Wei, Yao Chen, Jian Feng, Pooya Sareh, Shear Performance of Large-Thickness Precast Shear Walls with Cast-in-Place Belts and Grouting Sleeves, ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 10.1061/AJRUA6.RUENG-1000, 9, 2, (2023).
- Asghar AmaniDashlejeh, Cristiano Loss, Reliability-based design optimization of strengthened and reinforced glulam beams in bending, Wood Material Science & Engineering, 10.1080/17480272.2022.2146531, 18, 4, (1425-1443), (2022).
- Angelo Aloisio, Francesco Boggian, Roberto Tomasi, Design of a novel seismic retrofitting system for RC structures based on asymmetric friction connections and CLT panels, Engineering Structures, 10.1016/j.engstruct.2021.113807, 254, (113807), (2022).
- Angelo Aloisio, Marco Martino Rosso, Asif Iqbal, Massimo Fragiacomo, Hysteresis modeling of timber-based structural systems using a combined data and model-driven approach, Computers & Structures, 10.1016/j.compstruc.2022.106830, 269, (106830), (2022).