Research on Freight Train Operation Control Simulation on Long Steep Downhill Lines
Publication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 7, Issue 3
Abstract
Steep ramps are often unavoidable in route design, leading to adverse effects on freight transportation organization. For operators, how to safely and effectively run trains on steep downhill lines is a challenging task. In response to the requirement, firstly, the control principles of electric freight trains, including safety demands, rapid running, use of driving modes, and periodic braking, are analyzed. Then, a fast train operation simulation algorithm (FTOSA) is proposed to realize the control principles. Finally, a real case study is carried out, and FTOSA is compared with existing simulation software in China. The results showed that FTOSA could generate a high-efficiency speed profile on long steep downhill lines under the constraints of train safety control. This work can provide some references for the operation of electric freight trains.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some data, code, and models that support the findings of this study are available from the first author upon reasonable request (algorithm code of FTOSA and the data of the line).
Some modals and codes generated or used during the study are proprietary or confidential in nature and may only be provided with restrictions (data of the train traction and braking force curve can be provided in picture form; the software of GSSTM can not be provided).
Acknowledgments
This study was funded by the Fundamental Research Funds for the Central Universities (2020YJS101) and the National Natural Science Foundation of China (71971021). The authors thank International Science Editing for editing this manuscript.
References
Bai, Y., T. Ho, and B. Mao. 2011. “Train control to reduce delays upon service disturbances at railway junctions.” J. Transp. Sys. Eng. Inf. Technol. 11 (5): 114–122. https://doi.org/10.1016/S1570-6672(10)60147-X.
Caprioli, S., T. Vernersson, K. Handa, and K. Ikeuchi. 2016. “Thermal cracking of railway wheels: Towards experimental validation.” Tribol. Int. 94 (Feb): 409–420. https://doi.org/10.1016/j.triboint.2015.09.042.
China Railway Corporation. 2014. China railway technology administrating regulations (part of general speed rail). [In Chinese.] Beijing: China Railway Publishing House.
Dindar, S., S. Kaewunruen, M. An, and M. H. Osman. 2016. “Natural hazard risks on railway turnout systems.” Procedia Eng. 161: 1254–1259. https://doi.org/10.1016/j.proeng.2016.08.561.
Feng, Z. 2009. “Analysis of selection of target speed value and limit slope standard of Qingdao-Lianyungang railway.” [In Chinese.] J. Railway Eng. Soc. 26 (12): 30–34.
Flammini, F. 2012. Railway safety, reliability, and security: Technologies and systems engineering. Hershey, PA: IGI Global.
Hamilton, W. I., and T. Clarke. 2005. “Driver performance modelling and its practical application to railway safety.” Appl. Ergon. 36 (6): 661–670. https://doi.org/10.1016/j.apergo.2005.07.005.
Ho, T. K., B. H. Mao, Z. Z. Yuan, H. D. Liu, and Y. F. Fung. 2002. “Computer simulation and modeling in railway applications.” Comput. Phys. Commun. 143 (1): 1–10. https://doi.org/10.1016/S0010-4655(01)00410-6.
Huang, Y., L. Yang, T. Tang, Z. Gao, F. Cao, and K. Li. 2018. “Train speed profile optimization with on-board energy storage devices: A dynamic programming based approach.” Comput. Ind. Eng. 126 (Dec): 149–164. https://doi.org/10.1016/j.cie.2018.09.024.
Jong, J. C., and S. Chang. 2005. “Algorithms for generating train speed profiles.” J. East. ASIA Soc. Transp. Stud. 6: 356–371. https://doi.org/10.11175/easts.6.356.
Kaewunruen, S., M. H. Osman, and W. H. C. Eric. 2019. “Risk-based maintenance planning for rail fastening systems.” ASCE-ASME J. Risk Uncertainty Eng. Syst., Part A: Civ. Eng. 5 (3): 04019007. https://doi.org/10.1061/AJRUA6.0001012.
Lin, X., Q. Wang, P. Wang, P. Sun, and X. Feng. 2017. “The energy-efficient operation problem of a freight train considering long-distance steep downhill sections.” Energies 10 (6): 794. https://doi.org/10.3390/en10060794.
Liu, B. L. 2001. “Discussion on resistance braking effectiveness of heavy-haul train on long-steep downhill.” [In Chinese.] Railway Transp. Econ. (3): 30–33.
Liu, X., M. R. Saat, and C. P. Barkan. 2012. “Analysis of causes of major train derailment and their effect on accident rates.” Transp. Res. Rec. 2289 (1): 154–163. https://doi.org/10.3141/2289-20.
Lu, S., S. Hillmansen, T. K. Ho, and C. Roberts. 2013. “Single-train trajectory optimization.” IEEE Trans. Intell. Transp. Syst. 14 (2): 743–750. https://doi.org/10.1109/TITS.2012.2234118.
Malvezzi, M., P. Presciani, B. Allotta, and P. Toni. 2003. “Probabilistic analysis of braking performance in railways.” Proc. Inst. Mech. Eng., Part F-J. Rail Rapid Transit 217 (3): 149–165. https://doi.org/10.1243/095440903769012867.
Mao, B. H., T. J. He, and Z. Z. Yuan. 2000. “A general-purposed simulation system on train movement.” [In Chinese.] J. China Railway Soc. 22 (1): 1–6.
Miyatake, M., and H. Ko. 2010. “Optimization of train speed profile for minimum energy consumption.” IEEJ Trans. Electr. Electron. Eng. 5 (3): 263–269. https://doi.org/10.1002/tee.20528.
Pugi, L., M. Malvezzi, S. Papini, and G. Vettori. 2013. “Design and preliminary validation of a tool for the simulation of train braking performance.” J. Mod. Transp. 21 (4): 247–257. https://doi.org/10.1007/s40534-013-0027-6.
Shi, J., S. Ren, and M. Zhang. 2019. “Model-based assessment of longitudinal dynamic performance and energy consumption of heavy haul train on long-steep downgrades.” Transport 34 (3): 250–259. https://doi.org/10.3846/transport.2019.9043.
Sun, Z. Y., and C. M. Wang. 2009. “Security problems of operation heavy haul trains on the long heavy down grade.” [In Chinese.] Railway Locomot. Cars 29 (1): 4–7.
Transportation Safety Board of Canada. 2017. “Railway investigation report R13D0054.” Accessed May 5, 2020. https://www.tsb.gc.ca/eng/rapports-reports/rail/2013/R13D0054/R13D0054.html.
Tsunashima, H., Y. Naganuma, and T. Kobayashi. 2014. “Track geometry estimation from car-body vibration.” Supplement, Veh. Syst. Dyn. 52 (S1): 207–219. https://doi.org/10.1080/00423114.2014.889836.
Wang, X., and T. Tang. 2016. “Optimal control of heavy haul train on steep downward slope.” In Proc., 2016 IEEE 19th Int. Conf. on Intelligent Transportation Systems (ITSC), 778–783. New York: IEEE. https://doi.org/10.1109/ITSC.2016.7795643.
Xu, X., L. Yang, Z. Gao, and J. Long. 2017. “Simulations for train traffic flow on single-track railways with speed limits and slopes.” J. Simul. 11 (4): 346–356. https://doi.org/10.1057/s41273-016-0040-y.
Xu, Z. Q., W. H. Ma, Q. Wu, and S. H. Luo. 2013. “Coupler rotation behaviour and its effect on heavy haul trains.” Veh. Syst. Dyn. 51 (12): 1818–1838. https://doi.org/10.1080/00423114.2013.834369.
Yang, Y., H. Liu, C. Ma, and L. Xu. 2019. “Study on target speed control optimization of train movement for saving energy.” J. Transp. Syst. Eng. Inf. Technol. 19 (1): 142–148. https://doi.org/10.16097/j.cnki.1009-6744.2019.01.021.
Yin, J., T. Tang, L. Yang, J. Xun, Y. Huang, and Z. Gao. 2017. “Research and development of automatic train operation for railway transportation systems: A survey.” Transp. Res. Patt C: Emerging Technol. 85 (Dec): 548–572. https://doi.org/10.1016/j.trc.2017.09.009.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jan 15, 2020
Accepted: Feb 16, 2021
Published online: May 11, 2021
Published in print: Sep 1, 2021
Discussion open until: Oct 11, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Huazhen Yu, Guoxuan Tai, Zhengnan Lin, Youneng Huang, Research on Control Strategy of Heavy-Haul Train on Long and Steep Downgrades, Actuators, 10.3390/act11060145, 11, 6, (145), (2022).