Technical Papers
Aug 13, 2021

Approaches in Scaling Small-Scale Experiments on the Breaking Wave Interactions with a Vertical Wall Attached with Recurved Parapets

Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 147, Issue 6

Abstract

The breaking wave interactions on a vertical wall with three different recurved parapets were examined in two different scales (1:1 and 1:8) to study the scale effects. A similar testing condition with that of the large scale was adopted to identify a method for scaling up the small-scale laboratory measurements that involve impact pressure or forces. In the present study, two approaches for scaling up the small-scale studies, namely the Froude and Cuomo methods are adopted. By comparing the scaled-up results from small-scale studies with large-scale studies using the two approaches, a combined approach was suggested to estimate the force by integrating the pressure. In the proposed approach (named Cuomo–Froude method), the Cuomo method was adopted in the impact zone, and the Froude method was adopted in the nonimpact region for upscaling the small-scale experiments. The proposed approach shows a reasonable comparison with large results for pulsating and impulsive breaking conditions with a vertical wall having a different exit angle. Finally, the paper concludes that the pressure impulse follows the same scale for wave impacts as pressure.

Get full access to this article

View all available purchase options and get full access to this article.

Acknowledgments

This work was carried out under the funding of the DST-SERB project “Improved Design Perspective for Violent Wave Impacts during Extreme Natural Disaster Events (IDWavImp).” The large-scale studies are carried out on the project's scope under the funding of HYDRALAB IV, contract number 261520. The first author would like to express his utmost gratitude to the German Academic Exchange Service (DAAD) for supporting him financially throughout his project work in Germany.

References

Allsop, N. W. H., D. Vicinanza, and J. E. McKenna. 1996. Wave forces on vertical and composite breakwaters, 1–94. Strategic Research Rep. No. SR 443. Wallingford, UK: HR Wallingford.
Bagnold, R. A. 1939. “Interim report on wave-pressure research.” J. Inst. Civ. Eng. 12 (7): 201–226. https://doi.org/10.1680/ijoti.1939.14539.
Blenkinsopp, C. E., and J. R. Chaplin. 2011. “Void fraction measurements and scale effects in breaking waves in freshwater and seawater.” Coastal Eng. 58 (5): 417–428.
Bredmose, H., G. H. Bullock, and A. J. Hogg. 2015. “Violent breaking wave impacts. Part 3. Effects of scale and aeration.” J. Fluid Mech. 765: 82–113. https://doi.org/10.1017/jfm.2014.692.
Bretschneider, H. 1980. “Models of hydraulic structures: discharge conditions, energy dissipation, erosion.” In Hydraulic modeling, edited by H. Kobus, 183–203. Germany: Paul Parey.
Bullock, G. N., A. R. Crawford, P. J. Hewson, M. J. A. Walkden, and P. A. D. Bird. 2001. “The influence of air and scale on wave impact pressures.” Coastal Eng. 42 (4): 291–312. https://doi.org/10.1016/S0378-3839(00)00065-X.
Bullock, G. N., C. Obhrai, D. H. Peregrine, and H. Bredmose. 2007. “Violent breaking wave impacts. Part 1: Results from large-scale regular wave tests on vertical and sloping walls.” Coastal Eng. 54 (8): 602–617. https://doi.org/10.1016/j.coastaleng.2006.12.002.
Chan, E. S. 1994. “Mechanics of deep water plunging-wave impacts on vertical structures.” Coastal Eng. 22 (1–2): 115–133. https://doi.org/10.1016/0378-3839(94)90050-7.
Cuomo, G., W. Allsop, and S. Takahashi. 2010. “Scaling wave impact pressures on vertical walls.” Coastal Eng. 57 (6): 604–609. https://doi.org/10.1016/j.coastaleng.2010.01.004.
Dias, F., and J. M. Ghidaglia. 2018. “Slamming: Recent progress in the evaluation of impact pressures.” Annu. Rev. Fluid Mech. 50 (1): 243–273. https://doi.org/10.1146/annurev-fluid-010816-060121.
Goda, Y. 2000. Random seas and design of maritime structures. Singapore: World Scientific.
Heller, V. 2007. “Landslide generated impulse waves: Prediction of near field characteristics.” Doctoral dissertation, Dept. of Civil Engineering and the Environment, Eth Zurich.
Heller, V. 2011. “Scale effects in physical hydraulic engineering models.” J. Hydraul. Res. 49 (3): 293–306. https://doi.org/10.1080/00221686.2011.578914.
Hughes, S. A. 1993. Advanced series on ocean engineering 7. Physical models and laboratory techniques in coastal engineering. London: World Scientific.
Hugoniot, H. 1887. “Memoir on the propagation of movements in bodies, especially perfect gases (first part).” J. Ec. Polytech. 57 (3): 3–97.
Hugoniot, H. 1889. “Propagation du mouvement dans les corps.” J. Ec. Polytech. 57: 1–125.
Hull, P., and G. Müller. 2002. “An investigation of breaker heights, shapes and pressures.” Ocean Eng. 29 (1): 59–79.
Ivicsics, L. 1978. Hydraulic models. Budapest, Europe: Vizdok.
Kim, S. Y., Y. Kim, and J. Lee. 2017. “Comparison of sloshing-induced pressure in different scale tanks.” Ships Offshore Struct. 12 (2): 244–261. https://doi.org/10.1080/17445302.2015.1134893.
Kisacik, D., P. Troch, and P. Van Bogaert. 2012. “Description of loading conditions due to violent wave impacts on a vertical structure with an overhanging horizontal cantilever slab.” Coastal Eng. 60: 201–226. https://doi.org/10.1016/j.coastaleng.2011.10.001.
Kortenhaus, A., H. Oumeraci, J. Geeraerts, J. De Rouck, J. R. Medina, J. A. Gonzalez-Escriva. 2004. “Laboratory effects and other uncertainties in wave overtopping measurements.” Proc. 29th Int. Conf. Coastal Engineering, Singapore: World Scientific.
Lafeber, W., H. Bogaert, and L. Brosset. 2012a. “Elementary loading processes (ELP) involved in breaking wave impacts: Findings from the Sloshel project.” In Proc., 22nd Int. Offshore and Polar Engineering Conf. Mountain View, CA: International Society of Offshore and Polar Engineers.
Lafeber, W., H. Bogaert, and L. Brosset. 2012b. “Comparison of wave impact tests at large and full scale: Results from the Sloshel project.” In Proc., 22nd Int. Offshore and Polar Engineering Conf. Mountain View, CA: International Society of Offshore and Polar Engineers.
Le Méhauté, B. 1976. “An introduction to water waves.” In An introduction to hydrodynamics and water waves, 197–211. Berlin: Springer.
Le Méhauté, B. 1990. “Similitude.” Sea Ocean Eng. Sci. 9: 955–980.
Martin, H., and R. Pohl, eds. 2000. Technische Hydromechanik 4 (Technical hydromechanics). [In German.] Berlin: Verlag für Bauwesen.
McKenna, J. E. 1997. “Wave forces on caissons and breakwater crown walls.” Ph.D. thesis, Dept. of Civil and Structural Engineering, Queen’s Univ. of Belfast.
Novak, P. 1984. “Scaling factors and scale effects in modelling hydraulic structures.” In Symp. Scale Effects in Modelling Hydraulic Structures, edited by H. Rouse, 1–5. Esslingen, Germany: Technische Akademie.
Rankine, W. J. M. 1870. “On the thermodynamics theory of waves of finite longitudinal disturbances.” Philos. Trans. R. Soc. Lond. 160: 277–288.
Ravindar, R., and V. Sriram. 2021. “Impact pressure and forces on a vertical wall with different types of parapet.” J. Waterw. Port Coastal Ocean Eng. 147 (3): 04021007. https://doi.org/10.1061/(ASCE)WW.1943-5460.0000635.
Ravindar, R., V. Sriram, S. Schimmels, and D. Stagonas. 2019. “Characterisation of breaking wave impact on vertical wall with recurve.” ISH J. Hydraul. Eng. 25 (2): 153–161. https://doi.org/10.1080/09715010.2017.1391132.
Schüttrumpf, H. 2001. “Wellenuberlaufstromung bei Seedeichen - experimentelle und theoretische Untersuchungen.” [In German.] Ph.D. thesis, Fachbereich Bauingenieurwesen, Technische Universitat Braunschweig.
Schuttrumpf, H., and H. Oumeraci. 2005. “Scale and model effects in crest level design.” In Proc., 2nd. Coastal Symp., 1–12. Florida, FL: Coastal Education & Research Foundation (CERF).
Simonetti, I., L. Cappietti, H. Elsafti, and H. Oumeraci. 2018. “Evaluation of air compressibility effects on the performance of fixed OWC wave energy converters using CFD modelling.” Renewable Energy 119: 741–753. https://doi.org/10.1016/j.renene.2017.12.027.
Stagonas, D., R. Ravindar, V. Sriram, and S. Schimmels. 2020. “Experimental evidence of the influence of recurves on wave loads at vertical seawalls.” Water 12 (3): 889. https://doi.org/10.3390/w12030889.
Streicher, M., A. Kortenhaus, C. Altomare, S. Hughes, K. Marinov, B. Hofland, X. Chen, T. Suzuki, and L. Cappietti. 2019. “Non-repeatability, scale-and model effects in laboratory measurement of impact loads induced by an overtopped bore on a dike mounted wall.” In Vol. 58783 of Int. Conf. on Offshore Mechanics and Arctic Engineering. New York: ASME.
Wagner, H. 1932. “Über stoß- und gleitvorgänge an der oberfläche von flüssigkeiten.” ZAMM 12 (4): 193–215. https://doi.org/10.1002/zamm.19320120402.
Yalin, M. S. 1971. Theory of hydraulic models. London: Macmillan.

Information & Authors

Information

Published In

Go to Journal of Waterway, Port, Coastal, and Ocean Engineering
Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 147Issue 6November 2021

History

Received: Dec 14, 2020
Accepted: Jun 29, 2021
Published online: Aug 13, 2021
Published in print: Nov 1, 2021
Discussion open until: Jan 13, 2022

Permissions

Request permissions for this article.

Authors

Affiliations

Rajendran Ravindar [email protected]
Research Scholar, Dept. of Ocean Engineering, IIT Madras, Chennai 600 036, India. Email: [email protected]
Associate Professor, Dept. of Ocean Engineering, IIT Madras, Chennai 600 036, India. (corresponding author). ORCID: https://orcid.org/0000-0003-3586-9577. Email: [email protected]
Stefan Schimmels [email protected]
Operations Manager, Forschungszentrum Küste (FZK), Leibniz Univ. Hannover & Technische Universität Braunschweig, D-30419 Hannover, Germany. Email: [email protected]
Dimitris Stagonas [email protected]
Dept. of Civil and Environmental Engineering, Univ. of Cyprus, Nicosia 1678, Cyprus. Email: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

  • Tsunami-like Flow-Induced Forces on the Landward Structure behind a Vertical Seawall with and without Recurve Using OpenFOAM, Water, 10.3390/w14131986, 14, 13, (1986), (2022).
  • Numerical modelling of breaking wave impact loads on a vertical seawall retrofitted with different geometrical configurations of recurve parapets, Journal of Water and Climate Change, 10.2166/wcc.2022.211, 13, 10, (3644-3674), (2022).
  • Study on the load altering capability of recurve parapets using model scale experiments, OCEANS 2022 - Chennai, 10.1109/OCEANSChennai45887.2022.9775226, (1-9), (2022).
  • A review on fundamental properties of the jet in the wave environment, Ocean Engineering, 10.1016/j.oceaneng.2022.110914, 250, (110914), (2022).
  • Spatial distribution models of horizontal and vertical wave impact pressure on the elevated box structure, Applied Ocean Research, 10.1016/j.apor.2022.103245, 125, (103245), (2022).

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share