Real Time Control of a Prototype for Pressure Regulation and Energy Production in Water Distribution Networks
Publication: Journal of Water Resources Planning and Management
Volume 142, Issue 7
Abstract
In recent years, the opportunity of coupling a pressure management strategy with power generation in water distribution networks (WDNs) has attracted increasing interest. Numerical simulations developed for a number of real cases showed attractive profits and capital payback periods. Although many micro- and pico-hydro plants currently are operating along supply water mains, installations in WDNs are quite uncommon because of the high variability of flow and pressure patterns. Aiming at robust and effective industrial-based solutions, a laboratory prototype was developed for hydropower generation in WDNs. A pump as turbine (PAT) was used for generation, although a traditional turbine could be used as well. A control strategy was developed and implemented for automatic setting of regulating valves, aimed at both ensuring adequate pressure over the network and maximizing electric power. Experiments showed that the valves, equipped with the automatic control system previously described, can automatically both regulate the flow running the PAT and guarantee the set point pressure at the network monitored node, even in cases of abrupt change in pressure and flow discharge.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alatorre-Frank, C., and Thomas, T. H. (1990). “The pumps as turbine approach to small hydropower.” World Congress on Renewable Energy, Pergamon Press, Oxford, U.K.
Amelio, M., Barbarelli, S., and Scornaienchi, N. M. (2000). “Caratterizzazione al banco di prova di pompe centrifughe utilizzate come turbine.” 55 Congresso Nazionale ATI, Edizioni SGE, Padova, Italy (in Italian).
Araujo, L. S., Ramos, H., and Coelho, S. T. (2006). “Pressure control for leakage minimisation in water distribution systems management.” Water Resour. Manage., 20(1), 133–149.
Arriaga, R. (2010). “Pump as turbine—A pico-hydro alternative in Lao People’s Democratic Republic.” Renewable Energy, 35(5), 1109–1115.
Campisano, A., Modica, C., and Vetrano, L. (2012). “Calibration of proportional controllers for the RTC of pressures to reduce leakage in water distribution networks.” J. Water Resour. Plann. Manage., 377–384.
Carravetta, A., Fecarotta, O., Sinagra, M., and Tucciarelli, T. (2014). “Cost-benefit analysis for hydropower production in water distribution by a pump as turbine.” J. Water Resour. Plann. Manage., 04014002-1–04014002-8.
Childs, S. (1962). “Convert pumps to turbine and recover HP.” Hydrocarbon Process. Pet. Refin., 41(10), 173–174.
Colombo, A., and Kleiner, Y. (2012). “Energy recovery in water distribution systems using microturbines.”, NRC Construction, Toronto, 1–9.
Corcoran, L., McNabola, A., and Coughlan, P. (2012). “Energy recovery potential of the Dublin region water supply network.” World Congress on Climate and Energy, Dublin, Ireland, 1–8.
Derakhshan, S., and Nourbakhsh, A. (2008a). “Experimental study of characteristic curves of centrifugal pumps working as turbines in different specific speeds.” Exp. Therm. Fluid Sci., 32(3), 800–807.
Derakhshan, S., and Nourbakhsh, A. (2008b). “Theoretical, numerical and experimental investigation of centrifugal pumps in reverse operation.” Exp. Therm. Fluid Sci., 32(8), 1620–1627.
Fernandez, J., Blanco, E., Parrondo, J., Stickland, M. T., and Scanlon, T. J. (2004). “Performance of a centrifugal pump running in inverse mode.” Proc. Inst. Mech. Eng. Part A: J. Power Energy, 218(4), 265–271.
Fontana, N., Giugni, M., and Portolano, D. (2012). “Energy production policy in water distribution networks.” J. Water Resour. Plann. Manage., 237–244.
Franklin, G. F., Powell, J. D., and Emami-Naeini, A. (2013). Feedback control of dynamic systems, 7th Ed., Pearson, Upper Saddle River, NJ.
Gaius-Obaseki, T. (2010). “Hydropower opportunities in the water industry.” Int. J. Environ. Sci., 1(3), 392–402.
Gantar, M. (1988). “Propeller pump running as turbines.” Conf. on Hydraulic Machinery, Turboinstitut, Ljubljana, Slovenia.
Giugni, M., Fontana, N., and Ranucci, A. (2014). “Optimal location of PRVs and turbines in water distribution systems.” J. Water Resour. Plann. Manage., 06014004-1–06014004-6.
Heysel, C. S., and Filion, Y. R. (2014). “Estimating the payback period of in-line micro turbines with analytical probabilistic models.” Procedia Eng., 70, 815–822.
Jain, S. V., and Patel, R. N., (2014). “Investigations on pump running in turbine mode: A review of the state of the art.” Renewable Sustainable Energy Rev., 30, 841–868.
Kang, D., and Lansey, K. (2010). “Real-time optimal valve operation and booster disinfection for water quality in water distribution systems.” J. Water Resour. Plann. Manage., 463–473.
Khalil, H. (2013). Nonlinear systems, Pearson, Upper Saddle River, NJ.
Liberatore, S., and Sechi, G. M. (2009). “Location and calibration of valves in water distribution networks using a scatter-search meta-heuristic approach.” Water Resour. Manage., 23(8), 1479–1495.
Lueneburg, R., and Nelson, R. M. (1985). “Hydraulic power recovery turbines.” Centrifugal pumps: Design and applications, V. S. Lobanoff and R. R. Ross, eds., Gulf Publishing, Houston, 246–282.
McClaskey, B. M., and Lundquist, J. A. (1976). “Hydraulic power recovery turbines.” Joint Petroleum Mechanical Engineering and Pressure Vessels and Piping Conf., ASME, New York.
McNabola, A., Coughlan, P., and Williams, A. P. (2011). “The technical and economic feasibility of energy recovery in water supply networks.” Int. Conf. on Renewable Energy and Power Quality (ICREPQ 2011), Las Palmas de Gran Canaria, Spain.
Nicolini, M., and Zovatto, L. (2009). “Optimal location and control of pressure reducing valves in water networks.” J. Water Resour. Plann. Manage., 178–187.
Pedregal, P. (2004). Introduction to optimization, Springer, New York.
Prescott, S. L., and Ulanicki, B. (2008). “Improved control of pressure reducing valves in water distribution networks.” J. Hydraul. Eng., 56–65.
Ramirez-Llanos, E., and Quijano, N. (2009). “E. Coli bacterial foraging algorithm applied to pressure reducing valves control.” 2009 American Control Conf., IEEE, Curran Associates, Red Hook, NY, 10–12.
Ramos, H., and Borga, A. (1999). “Pumps as turbines: An unconventional solution to energy production.” Urban Water, 1(3), 261–263.
Sharma, K. R. (1985). Small hydroelectric project-use of centrifugal pumps as turbines, Kirloskar Electric Company, Bangalore, India.
Stepanoff, A. J. (1957). Centrifugal and axial flow pumps, Wiley, New York.
Vilanova, M. R. N., and Balestieri, J. A. P. (2014). “Hydropower recovery in water supply systems: Models and case study.” Energy Convers. Manage., 84, 414–426.
White, F. M. (1999). Fluid mechanics, 4th Ed., WCB McGraw Hill, New York.
Williams, A. (1996). Pumps as turbines: A user’s guide, Intermediate Technology Publications, London.
Williams, A., and Simpson, R. (2009). “Pico hydro—Reducing technical risks for rural electrification.” Renewable Energy, 34(8), 1986–1991.
Wu, W., Gao, J., Yuan, Y., Zhao, H., and Chang, K. (2011). “Water distribution network real-time simulation based on SCADA system using OPC communication.” 2011 Int. Conf. on Networking, Sensing and Control, IEEE, Curran Associates, Red Hook, NY, 11–13.
Yang, S. S., Derakhashan, S., and Kong, F. Y. (2012). “Theoretical, numerical and experimental prediction of pump as turbine.” Renewable Energy, 48, 507–513.
Information & Authors
Information
Published In
Journal of Water Resources Planning and Management
Volume 142 • Issue 7 • July 2016
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Apr 7, 2015
Accepted: Dec 29, 2015
Published online: Mar 17, 2016
Published in print: Jul 1, 2016
Discussion open until: Aug 17, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.