Optimal Design of Groundwater-Quality Sampling Networks with Three-Dimensional Selection of Sampling Locations Using an Ensemble Smoother
Publication: Journal of Water Resources Planning and Management
Volume 139, Issue 6
Abstract
In groundwater-quality monitoring it is important to consider that groundwater-contaminant concentration can vary vertically. To find the actual concentration of contaminants in a groundwater plume, it may be necessary to sample at different depths at the same location. This can be expensive due to the initial cost of the wells and the costs of multiple chemical analyses for each round of sampling. A sampling optimal design in three dimensions (3D) allows identifying the contaminant-concentration variations in all spatial directions at a minimum cost. The objective of this paper is to extend a methodology for the optimal design of groundwater-quality sampling networks previously introduced by the first author of this paper, to include the selection of measurements at different depths. The method is based on the application of a version of the ensemble smoother, a stochastic transport model, and a sequential optimization method. The method is demonstrated for the design of 3D groundwater-monitoring networks in two hypothetical problems.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors of this work were partially supported by Consejo Nacional de Ciencia y Tecnología (CONACYT) under grant 118058-Apoyo Complementario 2009. The authors also want to acknowledge Ingrid Khon-Ledezma for her help in setting up the second example. R. Simuta-Champo greatly appreciates the support of CONACYT for a scholarship grant for his Ph.D. studies.
References
ASCE Task Committee. (2003). Long-term groundwater monitoring: The state of the art, Reston, VA.
Babu, D., Pinder, G. F., Niemi, A., Ahlfeld, D. P., and Stothooff, A. (1997). “Chemical transport by three dimensional groundwater flows (PTC-Princeton transport code).”, Dept. of Civil Engineering, Princeton Univ., Princeton, NJ.
Bailey, R., and Baù, D. (2010). “Ensemble smoother assimilation of hydraulic head and return flow data to estimate hydraulic conductivity distribution.” Water Resour. Res., 46(12), W12543.
Bierkens, M. F. P. (2006). “Designing a monitoring network for detecting groundwater pollution with stochastic simulation and a cost model.” Stoch. Environ. Res. Risk Assess., 20(5), 335–351.
Cameron, K., and Hunter, P. (2000). “Optimization of LTM networks using GTS: Statistical approaches to spatial and temporal redundancy.” Technical Rep. of the Air Force Center for Environmental Excellence, Brooks Air Force Base, San Antonio.
Chadalavada, S., and Datta, B. (2008). “Dynamic optimal monitoring network design for transient transport of pollutants in groundwater aquifers.” Water Resour. Manage., 22(6), 651–670.
Deutsch, C. V., and Journel, A. G. (1998). GSLIB geostatistical software library and user’s guide, Oxford University Press, New York.
Dhar, A., and Datta, B. (2010). “Logic based design of groundwater monitoring network for redundancy reduction.” J. Water Resour. Plann. Manage., 136(1), 88–94.
Dokou, Z., and Pinder, G. F. (2009). “Optimal search strategy for the definition of a DNAPL source.” J. Hydrol., 376(3–4), 542–556.
Evensen, G. (2009). Data assimilation: The ensemble Kalman filter, 2nd Ed., Springer, Berlin Heidelberg, Germany.
Evensen, G., and van Leeuwen, P. J. (2000). “An ensemble Kalman smoother for nonlinear dynamics.” Mon. Weather Rev., 128(6), 1852–1867.
Fetter, C. W. (1993). Contaminant hydrogeology, Macmillan Publishers, New York.
Herrera, G. S., and Briseño, J. (2010). “Hydraulic conductivity and state estimation for stochastic flow and transport models.” Proc., Int. Conf. on Water Rock Interaction, CRC Press Taylor & Francis, Leiden, Netherlands.
Herrera, G. S., Guarnaccia, J., Pinder, G., and Simuta-Champo, R. (2001). “Design of efficient space-time groundwater quality sampling networks.” Proc., 2001 Int. Symp. on Environmental Hydraulics, International Association of Hydro-Environment Engineering and Research.
Herrera, G. S., and Pinder, G. F. (2005). “Space-time optimization of groundwater quality sampling networks.” Water Resour. Res., 41(12), W12407.
Herrera de Olivares, G. S. (1998). “Cost effective groundwater quality sampling network design.” Ph.D. dissertation, Univ. of Vermont, Burlington, VT.
Jazwinski, A. H. (1970). Stochastic processes and filtering theory, Elsevier, New York.
Kim, K., and Lee, K. (2007). “Optimization of groundwater-monitoring networks for identification of the distribution of a contaminant plume.” Stoch. Environ. Res. Risk Assess., 21(6), 785–794.
Kollat, J. B., Reed, P. M., and Maxwell, R. (2011). “Many-objective groundwater monitoring network design using bias-aware ensemble Kalman filtering, evolutionary optimization, and visual analytics.” Water Resour. Res., 47(2), W02529.
Li, Y., and Hilton, A. B. C. (2005). “Reducing spatial sampling in long-term groundwater monitoring networks using ant colony optimization.” Int. J. Comput. Intell. Res., 1(1), 19–28.
Loaiciga, H. A., Charbenneau, R. J., Everett, L. G., Fogg, G. E., and Hobbs, B. F. (1992). “Review of groundwater quality monitoring network design.” J. Hydraul. Eng., 118(1), 11–32.
Nowak, W., de Barros, F. P. J., and Rubin, Y. (2010). “Bayesian geostatistical design: Task-driven optimal site investigation when the geostatistical model is uncertain.” Water Resour. Res., 46(3), W03535.
Nunes, L. M., Cunha, M. C., and Ribeiro, L. (2004). “Optimal space-time coverage and exploration costs in groundwater monitoring networks.” Environ. Monit. Assess., 93(1–3), 103–104.
Reed, P. M., and Minsker, B. (2004). “Striking the balance: Long-term groundwater monitoring design for conflicting objectives.” J. Water Resour. Plann. Manage., 130(2), 140–149.
Reed, P. M., Minsker, B., and Volocchi, A. J. (2000). “Cost-effective long-term groundwater monitoring design using a genetic algorithm and global mass interpolation.” Water Resour. Res., 36(12), 3731–3741.
van Leeuwen, P. J., and Evensen, G. (1996). “Data assimilation and inverse methods in terms of a probabilistic formulation.” Mon. Weather Rev., 124(12), 2898–2913.
Wu, J., Zheng, C., and Chien, C. C. (2005). “Cost-effective sampling network design for contaminant plume monitoring under general hydrogeological conditions.” J. Contam. Hydrol., 77(1–2), 41–65.
Wu, J., Zheng, C., Chien, C. C., and Zheng, L. (2006). “A comparative study of Monte Carlo simple genetic algorithm and noisy genetic algorithm for cost-effective sampling network design under uncertainty.” Adv. Water Resour., 29(6), 899–911.
Wu, Y. (2004). “Optimal design of a groundwater monitoring network in Daqing, China.” Environ. Geol., 45(4), 527–535.
Zhang, Y., Pinder, G. F., and Herrera, G. S. (2005). “Least cost design of groundwater quality monitoring networks.” Water Resour. Res., 41(8), W08412.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jan 24, 2011
Published online: Jan 16, 2012
Discussion open until: Jun 16, 2012
Accepted: Feb 22, 2013
Published in print: Nov 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.