Experimental Test of an Articulated Lorry Swept Path
Publication: Journal of Transportation Engineering
Volume 139, Issue 12
Abstract
The regulatory requirements limiting the physical dimensions of heavy vehicles and driving skills do not guarantee the feasibility of negotiating the tightest curves of compact roundabouts. The specific evaluations needed for the intersection and the assumed design vehicle are often achieved by setting vehicle movement trajectories via computer programs, given the possibility of changing the design parameters both quickly and economically. The basic requirement for using these programs is their reliability, but they do have some weaknesses and flaws because of necessary simplifications, without which running the simulations would not be workable. A field test based on global positioning system instrumentation was conducted to define the area covered by a heavy vehicle turning in a real compact roundabout, successively compared with the simulated swept path. The preparation and the results of the experiment are described in the present study.
Get full access to this article
View all available purchase options and get full access to this article.
References
Australian Road Research Board (ARRB) Transport Research, Pearsons Transport Resource Centre P/L, Phillips Fox, Economic Associates P/L, Woodrooffe and Associates, Transport Engineering Research New Zealand. (2000). “Specification of performance standards and performance of the heavy vehicle fleet, performance based standards.” Project A3 and A4, Discussion Paper, NRTC/Austroads, Melbourne, VIC.
Autoturn Pro 3D [Computer software]. Richmond, BC, Canada, Transoft Solutions.
Cerezo, V., and Gothié, M. (2006). “Heavy goods vehicles accidents on roundabouts: Parameters of influence.” Proc., Int. Symp. on Heavy Vehicle Weights and Dimensions, Pennsylvania State Univ., University Park, PA.
Chalko, D. (2003). “High accuracy speed measurement using GPS (global positioning system).” Scientific Engineering Research P/L, Natural Univ., Melbourne, Australia.
Cox, R. (1998). “A review of the effect of increases in vehicle size on Australian geometric road design standards.” Proc., 5th Int. Symp. on Heavy Vehicle Weights and Dimensions, Vol. 3, Australian Road Research Board (ARRB), Vermont South, VIC.
Dragcevic, D., and Korlaet, Z. (2008). “Methods for setting road vehicle movements trajectories.” Baltic J. Road Bridge Eng., 3(2), 57–64.
European Parliament. (1997). “Relating to the masses and dimensions of certain categories of motor vehicles and their trailers and amending Directive 70/156/EEC.” Directive 97/27/EC, Council of 22 July, 1997, Brussels, Belgium.
Gattis, J. L., and Howard, M. D. (1998). “Large school bus design vehicle dimensions.”, Federal Highway Administration, Washington, DC.
Germanchev, A., and Bruzsa, L. (2006). “Hybrid testing method to prove the compliance of heavy vehicles.” Proc., 9th Int. Symp. on Heavy Vehicle Weights and Dimensions, Pennsylvania State Univ., State College, PA.
Harwood, D. W., Elefteriadou, L., Glauz, W. D., Richard, K. R., and Torbic, D. J. (2003). “Review of truck characteristics as factors in roadway design.”, National Cooperative Highway Research Program, Washington, DC.
Hassall, K., and Thompson, R. G. (2011). “Estimating the benefits of performance-based standards vehicles.”, Transportation Research Board, Washington, DC.
Highways Agency, Transport Scotland, Welsh Assembly Government and Dept. for Regional Development Northern Ireland. (2007). “Geometric design of roundabout, design manual of road and bridges.” Vol. 6, Section 2, TD 16/07, London.
Jekely, C. (2001). Inertial navigation systems with geodetic applications, Verlag De Gruiter, ed., Berlin.
Korlaet, Z., and Dragcevic, V. (2010). “Designing criteria of acute angle four-leg intersection at grade.” Proc., Int. Symp. on Highway Geometric Design, Transportation Research Board, Washington, DC.
Leunga, K. T., and Whidbornea, J. F. (2011). “A review of ground vehicle dynamic state estimations utilising GPS/INS.” Int. J. Veh. Mech. Mobility, 49(1–2), 29–58.
MATLAB [Computer software]. Natick, MA, MathWorks, Inc.
Ministero delle Infrastrutture e dei Trasporti. (2006). “Norme Funzionali e Geometriche per la Costruzione delle Intersezioni Stradali.” Official Italian Enhancement Act D.M. 19/04/06, Piazzale Porta Pia, Roma (RM).
Mussone, L., Matteucci, M., Bassani, M., and Rizzi, D. (2011). “An innovative method for the analysis of vehicle movements in roundabouts based on image processing.” J. Adv. Transp.,.
National Transport Commission Australia. (2007a). Performance based standards scheme, Network classification guidelines, Australian Transport Council, National Road Transport Commission, Melbourne, VIC.
National Transport Commission Australia. (2007b). Performance based standards scheme, The standards and vehicle assessment rules, Australian Transport Council, Melbourne VIC.
Schwieger, V. (2003). “Using handheld GPS receivers for precise positioning.” Proc., 2nd FIG Regional Conf., International Federation of Surveyors (FIG), Copenhagen, Denmark.
Seeber, G. (2003). Satellite geodesy. Foundations, methods and applications, Verlag de Gruyter, ed., Berlin.
SKI-Pro [Computer software]. Heerbrugg, Switzerland, Leica Geosystems.
Stover, V. G. (2008). “Issues relating to the geometric design of intersections.” Proc., 8th National Conf. on Access Management, Transportation Research Board, Washington, DC.
Sweatman, P. F., George, R., Tso, Y., and Ramsay, E. (1991). A study of heavy vehicle swept path performance, Australian Road Research Board, Vermont South, VIC, Australia.
Waddel, E., Lenters, M., and Gingrich, M. (2009). “Trucks in roundabouts: Pitfalls in design and operations.” ITE J., 79(2), 40–45.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Feb 8, 2013
Accepted: Jul 12, 2013
Published online: Jul 15, 2013
Published in print: Dec 1, 2013
Discussion open until: Dec 15, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.