Uncertainty in the Back-Calculation of Geometric Parameters of Vertical Curves Obtained with UAV
Publication: Journal of Surveying Engineering
Volume 149, Issue 1
Abstract
In existing roads, the geometrical parameters of the alignment are the primary input for safety or geometrical improvement studies. However, the as-built drawings are not always available to obtain geometrical parameters, whereby they must be back-calculated from surveying data. The procedures to back-calculate geometrical parameters of existing roads and fit profile data use parametric methods such as polynomials or explicit functions and nonparametric methods such as splines or smoothers. In smoother-based methods, a usual computing decision is to consider a fixed spacing, one smoothing algorithm, and one set of smoothing parameters to obtain a single set of curvature, deflection, and length (KAL) parameters of vertical curves. Therefore, different values of KAL parameters will be obtained depending on the choice of spacing, smoothing algorithm, and smoothing parameters. This paper aims to study the relative effect in the variability of KAL parameters of a vertical curve, introduced by several spacing combinations, smoothers, and parameters, using data obtained with an unmanned aerial vehicle (UAV). Elevation and slope data were obtained from a digital elevation model every 2, 5, and 10 m. The slope-horizontal distance diagrams were smoothed using single, double, and triple exponential smoothing for different levels, trends, and season parameters. The KAL parameters were back-calculated for each slope-horizontal distance diagram, and the variability analysis was undertaken with boosting regression, multiple analysis of variance, and -nearest neighbor algorithm and tested using receiver operating characteristics (ROC) curves. Results show that the smoothing algorithm and parameters choice affected mainly the parameter and that the single exponential smoothing algorithm is more suitable than double and triple exponential smoothing algorithms to estimate the KAL parameters.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data that support the findings of this study are available from the corresponding author upon reasonable request, including flight lines images (jpg) and elevation raw data for 2, 5, and 10 m (xls).
References
AASHTO. 2010. Highway safety manual. Washington, DC: AASHTO.
AASHTO. 2018. A policy on geometric design of highway and streets. Washington, DC: AASHTO.
Ben-Arieh, D., S. Chang, M. Rys, and G. Zhang. 2004. “Geometric modeling of highways using global positioning system data and approximation.” J. Transp. Eng. 130 (5): 632–636. https://doi.org/10.1061/(ASCE)0733-947X(2004)130:5(632).
Buja, A., T. Hastie, and R. Tibshirani. 1989. “Linear smoothers and additive models.” Ann. Stat. 17 (2): 453–510. https://doi.org/10.1214/aos/1176347115.
Cartes, P., T. Echaveguren, and P. Álvarez. 2022. “Effect of driving style on operating speed in crest vertical curves of two-lane highways.” Proc. Inst. Civ. Eng. Transp. 175 (5): 290–299. https://doi.org/10.1680/jtran.19.00065.
Castro, M., L. Iglesias, R. Rodríguez-Solano, and J. A. Sánchez. 2006. “Geometric modelling of highways using global positioning system (GPS) data and spline approximation.” Transp. Res. Part C: Emerging Technol. 14 (4): 233–243. https://doi.org/10.1016/j.trc.2006.06.004.
Daponte, P., L. De Vito, G. Mazzilli, F. Picariello, and S. Rapuano. 2017. “A height measurement uncertainty model for archaeological surveys by aerial photogrammetry.” Measurement 98 (Feb): 192–198. https://doi.org/10.1016/j.measurement.2016.11.033.
Di Mascio, P., M. Di Vito, G. Loprencipe, and A. Ragnoli. 2012. “Procedure to determine the geometry of road alignment using GPS data.” Procedia Social Behav. Sci. 53 (Oct): 1204–1217. https://doi.org/10.1016/j.sbspro.2012.09.969.
DJI (Da-Jiang Innovations). 2017. “Phantom 3 professional user manual V1.8.” Accessed June 15, 2020. https://www.dji.com/downloads/products/phantom-3-pro.
Easa, S. 1999. “Optimum vertical curves for highway profiles.” J. Surv. Eng. 125 (3): 147–157. https://doi.org/10.1061/(ASCE)0733-9453(1999)125:3(147).
Easa, S. 2008. “Efficient method for estimating globally optimal simple vertical curves.” J. Surv. Eng. 134 (1): 33–37. https://doi.org/10.1061/(ASCE)0733-9453(2008)134:1(33).
Easa, S., Y. Hassan, and Z. Karim. 1998. “Establishing highway vertical alignment using profile field data.” ITE J. 68 (8): 81–86.
Easa, S., and S. Kikuchi. 2009. “Generalized method for estimating best-fit vertical alignments for profile data.” Int. J. Civ. Environ. Eng. 3 (9): 693–701. https://doi.org/10.5281/zenodo.1059447.
Easa, S., and F. Wang. 2010. “Estimating continuous highway vertical alignment using the least-squares method.” Can. J. Civ. Eng. 37 (10): 1362–1370. https://doi.org/10.1139/L10-088.
Echaveguren, T., A. Diaz, and S. Vargas-Tejeda. 2015. “Operating speed models for horizontal reverse curves.” Proc. Inst. Civ. Eng. Transp. 168 (6): 510–552. https://doi.org/10.1680/jtran.13.00016.
Gardner, E. S., Jr. 1985. “Exponential smoothing: The state of the art.” J. Forecasting 4 (1): 1–28. https://doi.org/10.1002/for.3980040103.
Higuera de Frutos, S., and M. Castro. 2017. “A method to identify and classify the vertical alignment of existing roads.” Comput.-Aided Civ. Infrastruct. Eng. 32 (11): 952–963. https://doi.org/10.1111/mice.12302.
Holgado-Barco, A., D. Gonzalez-Aguilera, P. Arias-Sanchez, and J. Martinez-Sanchez. 2014. “An automated approach to vertical road characterization using mobile LiDAR systems: Longitudinal profiles and cross-sections.” ISPRS J. Photogramm. Remote Sens. 96 (Oct): 28–37. https://doi.org/10.1016/j.isprsjprs.2014.06.017.
Hu, W., F. Tan, and A. Barnes. 2004. “New solutions to optimum vertical curve problem.” J. Surv. Eng. 130 (3): 119–125. https://doi.org/10.1061/(ASCE)0733-9453(2004)130:3(119).
Jarque, C., and A. Bera. 1987. “A test for normality of observations and regression residuals.” Int. Stat. Rev. 55 (2): 163–172. https://doi.org/10.2307/1403192.
Karamanou, A., K. Papazissi, D. Paradissis, and B. Psarianos. 2009. “Precise estimation of road horizontal and vertical geometric features using mobile mapping techniques.” Bol. Ciênc. Geodésicas 15 (5): 762–775.
Kobryń, A. 2017. Transition curves for highway geometric design. New York: Springer.
Lawford, S. 2005. “Finite-sample quantiles of the Jarque–Bera test.” Appl. Econ. Lett. 12 (6): 351–354. https://doi.org/10.1080/1350485042000338653.
Pu, H., L. Zhao, W. Li, J. Zhang, Z. Zhang, J. Liang, and T. Song. 2019. “A global iterations method for recreating railway vertical alignment considering multiple constraints.” IEEE Access 7 (Aug): 121199–121211. https://doi.org/10.1109/ACCESS.2019.2937658.
Rosnell, T., and E. Honkavaara. 2012. “Point cloud generation from aerial image data acquired by a quadrocopter type micro unmanned aerial vehicle and a digital still camera.” Sensors 12 (1): 453–480. https://doi.org/10.3390/s120100453.
Song, Z., X. Ma, P. Schonfeld, and J. Li. 2022. “Effects of parameter selections on fitting vertical curves to data.” J. Surv. Eng. 148 (2): 04022001. https://doi.org/10.1061/(ASCE)SU.1943-5428.0000394.
Song, Z., F. Yang, P. Schonfeld, H. Liu, and J. Li. 2021. “Integrating segmentation and parameter estimation for recreating vertical alignments.” Comput.-Aided Civ. Infrastruct. Eng. 36 (4): 472–488. https://doi.org/10.1111/mice.12634.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jul 27, 2021
Accepted: Jul 2, 2022
Published online: Oct 26, 2022
Published in print: Feb 1, 2023
Discussion open until: Mar 26, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.