Virtual Observation Iteration Solution and A-Optimal Design Method for Ill-Posed Mixed Additive and Multiplicative Random Error Model in Geodetic Measurement
Publication: Journal of Surveying Engineering
Volume 147, Issue 4
Abstract
The mixed additive and multiplicative random error model is a combination of the additive error random model and multiplicative random error model. Weakness is an attribute of the mixed additive and multiplicative random error model, and the ill-posed problem of the coefficient matrix is ignored in the existing parameter estimation methods for addressing the model, which will result in an unstable or nonconvergent solution. Aiming at solving this problem, this paper first derives the virtual observation iterative solution (VOIS) formula for the ill-posed mixed additive and multiplicative random error model by combining the observation equation of the mixed additive and multiplicative random error model and the virtual observation equation. Furthermore, based on the principle of the A-optimal design, the A-optimal design method is proposed to determine the regularization parameter of the ill-posed model. Finally, the VOIS method is applied in simulated and actual data for verification and analysis and is compared with existing methods. The experimental results show that the A-optimal design method can determine reasonable regularization parameters and that the VOIS method can obtain more accurate parameter estimations than existing methods and has strong feasibility and applicability.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request (i.e., raw data of the digital elevation models of Examples 2, 3, and 4 can be provided as.mat files).
Acknowledgments
The authors are grateful to all of the anonymous reviewers and editors for their careful review and valuable suggestions, which improved the quality of this paper. This research is supported by the National Natural Science Foundation of China, Grant Nos. 41874001 and 41664001, National Key Research and Development Program, Grant No. 2016YFB0501405, and Innovation Found Designated for Graduate Students of ECUT, Grant No. DHYC-202020.
References
Amiri-Simkooei, A. R. 2016. “Non-negative least-squares variance component estimation with application to GPS time series.” J. Geod. 90 (5): 451–466. https://doi.org/10.1007/s00190-016-0886-9.
Bolkas, D., G. Fotopoulos, A. Braun, and I. N. Tziavos. 2016a. “Assessing digital elevation model uncertainty using GPS survey data.” J. Surv. Eng. 142 (3): 04016001. https://doi.org/10.1061/(ASCE)SU.1943-5428.0000169.
Bolkas, D., G. Fotopoulos, and C. Glennie. 2016b. “On the impact of a refined stochastic model for airborne LiDAR measurements.” J. Appl. Geod. 10 (3): 185–196. https://doi.org/10.1515/jag-2016-0005.
Box, M. J. 1971. “Bias in nonlinear estimation.” J. R. Stat. Soc. 33 (2): 171–201. https://doi.org/10.1111/j.2517-6161.1971.tb00871.x.
Braun, A., and G. Fotopoulos. 2007. “Assessment of SRTM, ICESat, and survey control monument elevations in Canada.” Photogramm. Eng. Remote Sens. 73 (12): 1333–1342. https://doi.org/10.14358/PERS.73.12.1333.
Cai, J., E. W. Grafarend, C. Hu, and J. Wang. 2008. “The uniform Tykhonov-Phillips regularization (α-weighted S-homBLE) and its application in GPS rapid static positioning.” In Vol. of 132 Proc., 6th Hotine-Marussi Symp. of Theoretical and Computational Geodesy, edited by P. Xu, J. Liu, and A. Dermanis, 216–224. Berlin: Springer. https://doi.org/10.1007/978-3-540-74584-6_35.
Cai, J., E. W. Grafarend, and B. Schaffrin. 2004. “The A-optimal regularization parameter in uniform Tykhonov-Phillips regularization-α weighted BLE.” In Vol. 127 of Proc., 5th Hotine-Marussi Symp. on Mathematical Geodesy, 309–324. Berlin: Springer. https://doi.org/10.1007/978-3-662-10735-5_41.
Carlos, L. M., F. Xavier, and L. Pipia. 2011. “Forest parameter estimation in the Pol-InSAR context employing the multiplicative–additive speckle noise model.” ISPRS J. Photogramm. Remote Sens. 66 (5): 597–607. https://doi.org/10.1016/j.isprsjprs.2011.03.006.
Detweiler, Z. R., and J. B. Ferris. 2010. “Interpolation methods for high-fidelity three-dimensional terrain surfaces.” J. Terramech. 47 (4): 209–217. https://doi.org/10.1016/j.jterra.2010.01.002.
Ewing, C. E., and M. M. Mitchell. 1970. Introduction to geodesy. New York: Elsevier.
Fang, X. 2011. “Weighted total least squares solutions for applications in geodesy.” Ph.D. thesis, Dept. of Geodesy and Geoinformatics, Leibniz Univ.
Farr, T. G., et al. 2007. “The shuttle radar topography mission.” Rev. Geophys. 45 (2): 361. https://doi.org/10.1029/2005RG000183.
Fotopoulos, G. 2003. “An analysis on the optimal combination of geoid, orthometric and ellipsoidal height data.” Ph.D. thesis, Dept. of Geomatics Engineering, Univ. of Calgary.
Fotopoulos, G. 2005. “Calibration of geoid error models via a combined adjustment of ellipsoidal, orthometric and gravimetric geoid height data.” J. Geod. 79 (1): 111–123. https://doi.org/10.1007/s00190-005-0449-y.
Golub, G. H., P. C. Hansen, and D. P. O’Leary. 1999. “Tikhonov regularization and total least squares.” SIAM J. Matrix Anal. Appl. 21 (1): 185–194. https://doi.org/10.1137/S0895479897326432.
Golub, G. H., M. Heath, and G. Wahba. 1979. “Generalized cross-validation as a method for choosing a good ridge parameter.” Technometrics 21 (2): 215–223. https://doi.org/10.1080/00401706.1979.10489751.
Golub, G. H., and C. F. van Loan. 1980. “An analysis of the total least-squares problem.” SIAM J. Numer. Anal. 17 (6): 883–893. https://doi.org/10.1137/0717073.
Hansen, P. C. 1992. “Analysis of discrete ill-posed problems by means of the L-curve.” SIAM Rev. 34 (4): 561–580. https://doi.org/10.1137/1034115.
Hartung, J. 1981. “Nonnegative minimum biased invariant estimation in variance component models.” Ann. Stat. 9 (2): 278–292. https://doi.org/10.1214/aos/1176345394.
Hill, C. A., M. Harris, K. D. Ridley, E. Jakeman, and P. Lutzmann. 2003. “LiDAR frequency modulation vibrometry in the presence of speckle.” Appl. Opt. 42 (6): 1091–1100. https://doi.org/10.1364/AO.42.001091.
Hladik, C., and M. Alber. 2012. “Accuracy assessment and correction of a LIDAR-derived salt marsh digital elevation model.” Remote Sens. Environ. 121 (138): 224–235. https://doi.org/10.1016/j.rse.2012.01.018.
Hoerl, A. E., and R. W. Kennard. 1970. “Ridge regression: Biased estimation for nonorthogonal problems.” Technometrics 12 (1): 55–67. https://doi.org/10.1080/00401706.1970.10488634.
Hoerl, A. E., and R. W. Kennard. 2000. “Ridge regression: Biased estimation for nonorthogonal problems.” Technometrics 42 (1): 80–86. https://doi.org/10.1080/00401706.2000.10485983.
Jarvis, A., H. I. Reuter, A. Nelson, and E. Guevara. 2008. Hole-filled seamless SRTM data V4. New York: International Centre for Tropical Agriculture.
Kobler, A., N. Pfeifer, P. Ogrinc, L. Todorovski, K. Ostir, and S. Dzeroski. 2007. “Repetitive interpolation: A robust algorithm for DTM generation from aerial laser scanner data in forested terrain.” Remote Sens. Environ. 108 (1): 9–23. https://doi.org/10.1016/j.rse.2006.10.013.
Koch, K. R., and J. Kusche. 2002. “Regularization of geopotential determination from satellite data by variance components.” J. Geod. 76 (5): 259–268. https://doi.org/10.1007/s00190-002-0245-x.
Leigh, C. L., D. B. Kidner, and M. C. Thomas. 2010. “The use of LiDAR in digital surface modelling: Issues and errors.” Trans. GIS 13 (4): 345–361. https://doi.org/10.1111/j.1467-9671.2009.01168.x.
Macdoran, P. F. 1979. “Satellite emission radio interferometric Earth surveying series: GPS geodetic system.” Bull Geod. 53 (2): 117–138. https://doi.org/10.1007/BF02521085.
Petrov, L., D. Gordon, J. Gipson, D. MacMillan, C. Ma, E. Fomalont, R. C. Walker, and C. C. Carabajal. 2009. “Precise geodesy with the very long baseline array.” J. Geod. 83 (9): 859–876. https://doi.org/10.1007/s00190-009-0304-7.
Rodriguez, E., C. S. Morris, and J. E. Belz. 2006. “A global assessment of the SRTM performance.” Photogramm. Eng. Remote Sens. 72 (3): 249–260. https://doi.org/10.14358/PERS.72.3.249.
Shen, Y., P. Xu, and B. Li. 2012. “Bias-corrected regularized solution to inverse ill-posed models.” J. Geod. 86 (8): 597–608. https://doi.org/10.1007/s00190-012-0542-y.
Shi, Y., and P. Xu. 2015. “Comparing the estimates of the variance of unit weight in multiplicative error models.” Acta Geod. Geophys. 50 (3): 353–363. https://doi.org/10.1007/s40328-014-0096-y.
Shi, Y., and P. Xu. 2020. “Adjustment of measurements with multiplicative random errors and trends.” In Proc., IEEE Geoscience and Remote Sensing Letters, 1–5. New York: IEEE. https://doi.org/10.1109/LGRS.2020.3010827.
Shi, Y., P. Xu, and J. Peng. 2015. “An overview of adjustment methods for mixed additive and multiplicative random error models.” In Vol. of 142 Proc., 8th Hotine-Marussi Symp. on Mathematical Geodesy, edited by N. Sneeuw, P. Novák, M. Crespi, and F. Sansò. Berlin: Springer. https://doi.org/10.1007/1345_2015_72.
Shi, Y., P. Xu, J. Peng, C. Shi, and J. Liu. 2014. “Adjustment of measurements with multiplicative errors: Error analysis, estimates of the variance of unit weight, and effect on volume estimation from LiDAR-type digital elevation models.” Sensors 14 (1): 1249–1266. https://doi.org/10.3390/s140101249.
Teunissen, P. J. G., and A. R. Amiri-Simkooei. 2008. “Least-squares variance component estimation.” J. Geod. 82 (2): 65–82. https://doi.org/10.1007/s00190-007-0157-x.
Wang, L., and W. Gu. 2020. “A-optimal design method to determine the regularization parameter of coseismic slip distribution inversion.” Geophys. J. Int. 221 (1): 440–450. https://doi.org/10.1093/gji/ggaa030.
Wang, L., and G. Wen. 2020. “Virtual observation method and variance component estimation for deformation inversion on the Mogi model.” [In Chinese.] Chin. J. Geophys. 63 (5): 1775–1786. https://doi.org/10.6038/cjg2020M0585.
Wang, L., G. Wen, and Y. Zhao. 2019. “Virtual observation method and precision estimation for ill-posed partial EIV model.” J. Surv. Eng. 145 (4): 04019010. https://doi.org/10.1061/(ASCE)SU.1943-5428.0000282.
Wang, L., and G. Xu. 2016. “Variance component estimation for partial errors-in-variables models.” Stud. Geophys. Geod. 60 (1): 35–55. https://doi.org/10.1007/s11200-014-0975-2.
Wang, L., and D. Yu. 2014. “Virtual observation method to ill-posed total least squares problem.” [In Chinese.] Acta Geod. Cartographica Sin. 43 (6): 575–581. https://doi.org/10.13485/j.cnki.11-2089.2014.0091.
Xu, P. 1998. “Truncated SVD methods for discrete linear ill-posed problems.” Geophys. J. Int. 135 (2): 505–514. https://doi.org/10.1046/j.1365-246X.1998.00652.x.
Xu, P. 1999. “Despeckling SAR-type multiplicative noise.” Int. J. Remote Sens. 20 (13): 2577–2596. https://doi.org/10.1080/014311699211949.
Xu, P., Y. Shen, Y. Fukuda, and Y. Liu. 2006. “Variance component estimation in linear inverse ill-posed models.” J. Geod. 80 (2): 69–81. https://doi.org/10.1007/s00190-006-0032-1.
Xu, P., Y. Shi, J. Peng, J. Liu, and C. Shi. 2013. “Adjustment of geodetic measurements with mixed multiplicative and additive random errors.” J. Geod. 87 (7): 629–643. https://doi.org/10.1007/s00190-013-0635-2.
Xu, P., and S. Shimada. 2000. “Least squares parameter estimation in multiplicative noise models.” Commun. Stat.-Simul. Comput. 29 (1): 83–96. https://doi.org/10.1080/03610910008813603.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jul 28, 2020
Accepted: Apr 5, 2021
Published online: Jun 30, 2021
Published in print: Nov 1, 2021
Discussion open until: Nov 30, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Leyang Wang, Hao Xiao, MINQUE Method Variance Component Estimation for the Mixed Additive and Multiplicative Random Error Model, Journal of Surveying Engineering, 10.1061/JSUED2.SUENG-1396, 149, 4, (2023).
- Lidu Zhao, Xiaping Ma, Zhongfu Xiang, Shuangcheng Zhang, Chuan Hu, Yin Zhou, Guicheng Chen, Landslide Deformation Extraction from Terrestrial Laser Scanning Data with Weighted Least Squares Regularization Iteration Solution, Remote Sensing, 10.3390/rs14122897, 14, 12, (2897), (2022).
- Leyang Wang, Tao Chen, A method for mixed additive and multiplicative random error models with inequality constraints in geodesy, Earth, Planets and Space, 10.1186/s40623-022-01685-4, 74, 1, (2022).
- Leyang Wang, Tao Chen, Chuanyi Zou, The TSCR method for precision estimation of ill-posed mixed additive and multiplicative random error model, Communications in Statistics - Simulation and Computation, 10.1080/03610918.2022.2154801, (1-15), (2022).