Dimensionless Pressure-Impulse Diagrams for Elastic Plastic and Elastic Plastic with Hardening Structural Members for SDOF Structural Systems
Publication: Journal of Structural Engineering
Volume 148, Issue 6
Abstract
A pressure-impulse (P-I) diagram provides a quick tool to assess the resistance of a structural system to blast loads, based on a nonlinear single-degree-of-freedom (SDOF) analysis. Thus, instead of performing many SDOF analyses, the P-I diagram is the limit curve representing the combination of pressure and impulse for which the designed damage of the structure is achieved (commonly defined by the allowed maximum displacement). In this paper, nonlinear SDOF equations are represented in a dimensionless form for linear-elastic, elastic-plastic, and elastic plastic with hardening systems. Dimensionless P-I diagrams are derived for triangular blast load, and they are represented by the dimensionless parameters of the problem. Based on regression analysis, simplified empirical equations are developed to quickly calculate the dimensionless and absolute P-I diagram for a given case without performing any additional structural or numerical analysis. The accuracy of the suggested method is proved by statistical parameters and by a case study showing its capabilities. The study is limited to a solution of a classical SDOF system but may be extended to a more realistic scenario in which an equivalent SDOF equation is commonly adopted.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
References
Abedini, M., A. A. Mutalib, S. N. Raman, R. Alipour, and E. Akhlaghi. 2018. “Pressure–impulse (P–I) diagrams for reinforced concrete (RC) structures: A review.” Arch. Comput. Methods Eng. 26 (3): 733–767. https://doi.org/10.1007/s11831-018-9260-9.
Abrahamson, G. R., and H. E. Lindberg. 1976. “Peak load-impulse characterization of critical pulse loads in structural dynamics.” Nucl. Eng. Des. 37 (1): 35–46. https://doi.org/10.1016/0029-5493(76)90051-0.
Biggs, J. M. 1964. Introduction to structural dynamics. New York: McGraw-Hill.
Carta, G., and F. Stochino. 2013. “Theoretical models to predict the flexural failure of reinforced concrete beams under blast loads.” Eng. Struct. 49 (Apr): 306–315. https://doi.org/10.1016/j.engstruct.2012.11.008.
Chen, S., X. Chen, G.-Q. Li, and Y. Lu. 2018. “Development of pressure-impulse diagrams for framed PVB-laminated glass windows.” J. Struct. Eng. 145 (3): 04018263. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002258.
Chernin, L., M. Vilnay, I. Shufrin, and D. Cotsovos. 2019. “Pressure–impulse diagram method—A fundamental review.” Proc. Inst. Civ. Eng. 172 (2): 55–69. https://doi.org/10.1680/jencm.17.00017.
Colombo, M., and P. Martinelli. 2012. “Pressure-impulse diagrams for RC and FRC circular plates under blast loads.” Eur. J. Environ. Civ. Eng. 16 (7): 837–862. https://doi.org/10.1080/19648189.2012.675149.
Ding, Y., M. Wang, Z. X. Li, and H. Hao. 2013. “Damage evaluation of the steel tubular column subjected to explosion and post-explosion fire condition.” Eng. Struct. 55 (Oct): 44–55. https://doi.org/10.1016/j.engstruct.2012.01.013.
Dragos, J., and C. Wu. 2013. “A new general approach to derive normalised pressure impulse curves.” Int. J. Impact Eng. 62 (Dec): 1–12. https://doi.org/10.1016/j.ijimpeng.2013.05.005.
Dragos, J., and C. Wu. 2014. “Application of normalized pressure impulse diagrams for vented and unvented confined blasts.” J. Eng. Mech. 140 (3): 593–603. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000680.
Dragos, J., C. Wu, and D. J. Oehlers. 2013. “Simplification of fully confined blasts for structural response analysis.” Eng. Struct. 56 (Nov): 312–326. https://doi.org/10.1016/j.engstruct.2013.05.018.
El-Dakhakhni, W. W., W. F. Mekky, and S. H. C. Rezaei. 2009. “Validity of SDOF models for analyzing two-way reinforced concrete panels under blast loading.” J. Perform. Constr. Facil. 24 (4): 311–325. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000090.
Fallah, A. S., and L. A. Louca. 2007. “Pressure–impulse diagrams for elastic-plastic-hardening and softening single-degree-of-freedom models subjected to blast loading.” Int. J. Impact Eng. 34 (4): 823–842. https://doi.org/10.1016/j.ijimpeng.2006.01.007.
Friedlander, F. G. 1946. “The diffraction of sound pulses I. Diffraction by a semi-infinite plane.” Proc. R. Soc. London, Ser. A 186 (1006): 322–344. https://doi.org/10.1098/rspa.1946.0046.
Geng, S., Y. Wei, and W. Wang. 2021. “Dynamic increase factor of an equivalent SDOF structural system for beams with different support conditions under conventional blast loading.” J. Eng. Mech. 147 (4): 06021002. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001913.
Grisaro, H. Y., J. A. Packer, and M. V. Seica. 2019. “Weak axis response of steel I-sections subjected to close-in detonations.” J. Constr. Steel Res. 160 (Sep): 189–206. https://doi.org/10.1016/j.jcsr.2019.05.025.
Huang, X., H. Bao, Y. Hao, and H. Hao. 2017. “Damage assessment of two-way RC slab subjected to blast load using mode approximation approach.” Int. J. Struct. Stab. Dyn. 17 (1): 1750013. https://doi.org/10.1142/S0219455417500134.
Jarrett, D. E. 1968. “Derivation of the British explosives safety distances.” Ann. N. Y. Acad. Sci. 152 (1): 18–35. https://doi.org/10.1111/j.1749-6632.1968.tb11963.x.
Jones, J., C. Wu, D. J. Oehlers, A. S. Whittaker, W. Sun, S. Marks, and R. Coppola. 2009. “Finite difference analysis of simply supported RC slabs for blast loadings.” Eng. Struct. 31 (12): 2825–2832. https://doi.org/10.1016/j.engstruct.2009.07.011.
Krauthammer, T. 2008. “Modern protective structures.” In Modern protective structures. Boca Raton, FL: CRC Press.
Li, J., and H. Hao. 2014. “Numerical study of concrete spall damage to blast loads.” Int. J. Impact Eng. 68 (Jun): 41–55. https://doi.org/10.1016/j.ijimpeng.2014.02.001.
Li, J., C. Wu, H. Hao, and Z. Liu. 2017. “Post-blast capacity of ultra-high performance concrete columns.” In Vol. 134 of Engineering structures, 289–302. Oxford: Elsevier.
Li, Q. M., and H. Meng. 2002a. “Attenuation or enhancement—A one-dimensional analysis on shock transmission in the solid phase of a cellular material.” Int. J. Impact Eng. 27 (10): 1049–1065. https://doi.org/10.1016/S0734-743X(02)00016-7.
Li, Q. M., and H. Meng. 2002b. “Pressure-impulse diagram for blast loads based on dimensional analysis and single-degree-of-freedom model.” J. Eng. Mech. 128 (1): 87–92. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:1(87).
Li, Q. M., and H. Meng. 2002c. “Pulse loading shape effects on pressure–impulse diagram of an elastic–plastic, single-degree-of-freedom structural model.” Int. J. Mech. Sci. 44 (9): 1985–1998. https://doi.org/10.1016/S0020-7403(02)00046-2.
Ma, G. W., X. Huang, and J. C. Li. 2009. “Simplified damage assessment method for buried structures against external blast load.” J. Struct. Eng. 136 (5): 603–612. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000138.
Newmark, N. M. 1959. “A method of computation for structural dynamics.” J. Eng. Mech. Div. 85 (3): 67–94. https://doi.org/10.1061/JMCEA3.0000098.
Ngo, T., D. Mohotti, A. Remennikov, and B. Uy. 2015. “Numerical simulations of response of tubular steel beams to close-range explosions.” J. Constr. Steel Res. 105 (Feb): 151–163. https://doi.org/10.1016/j.jcsr.2014.11.007.
Shi, Y., H. Hao, and Z. X. Li. 2008. “Numerical derivation of pressure–impulse diagrams for prediction of RC column damage to blast loads.” Int. J. Impact Eng. 35 (11): 1213–1227. https://doi.org/10.1016/j.ijimpeng.2007.09.001.
Stochino, F., and G. Carta. 2014. “SDOF models for reinforced concrete beams under impulsive loads accounting for strain rate effects.” Nucl. Eng. Des. 276 (Sep): 74–86. https://doi.org/10.1016/j.nucengdes.2014.05.022.
Stolz, A., K. Fischer, C. Roller, and S. Hauser. 2014. “Dynamic bearing capacity of ductile concrete plates under blast loading.” Int. J. Impact Eng. 69 (Jul): 25–38. https://doi.org/10.1016/j.ijimpeng.2014.02.008.
The MathWorks Inc. 2016. Matlab R2017a. Natick, MA: MathWorks Inc.
Thilakarathna, H. M. I., D. P. Thambiratnam, M. Dhanasekar, and N. Perera. 2010. “Numerical simulation of axially loaded concrete columns under transverse impact and vulnerability assessment.” Int. J. Impact Eng. 37 (11): 1100–1112. https://doi.org/10.1016/j.ijimpeng.2010.06.003.
Tsai, Y. K., and T. Krauthammer. 2017. “Energy based load-impulse diagrams.” Eng. Struct. 149 (Oct): 64–77. https://doi.org/10.1016/j.engstruct.2016.10.042.
USACE. 2008. Unified facilities criteria (UFC)—Structures to resist the effects of accidental explosions. UFC 3-340-02. Washington, DC: US Army Corps of Engineers.
USACE Protective Design Center. 2008. Methodology manual for the single-degree-of freedom blast effects design spreadsheets (SBEDS). PDC TR-06-01 Rev 1. Washington, DC: US Army Corps of Engineers.
Wang, Y., and M. X. Xiong. 2015. “Analysis of axially restrained water storage tank under blast loading.” Int. J. Impact Eng. 86 (Dec): 167–178. https://doi.org/10.1016/j.ijimpeng.2015.07.012.
Xia, Y., C. Wu, and Z.-X. Li. 2015. “Optimized design of foam cladding for protection of reinforced concrete members under blast loading.” J. Struct. Eng. 141 (9): 06014010. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001190.
Youngdahl, C. K. 1970. “Correlation parameters for eliminating the effect of pulse shape on dynamic plastic deformation.” J. Appl. Mech. 37 (3): 744–752. https://doi.org/10.1115/1.3408605.
Yu, R., D. Zhang, L. Chen, and H. Yan. 2018. “Non-dimensional pressure–impulse diagrams for blast-loaded reinforced concrete beam columns referred to different failure modes.” Adv. Struct. Eng. 21 (14): 2114–2129. https://doi.org/10.1177/1369433218768085.
Zhang, F., C. Wu, X. L. Zhao, and Z. X. Li. 2017. “Numerical derivation of pressure-impulse diagrams for square UHPCFDST columns.” Thin-Walled Struct. 115 (Jun): 188–195. https://doi.org/10.1016/j.tws.2017.02.017.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Sep 20, 2021
Accepted: Feb 1, 2022
Published online: Apr 5, 2022
Published in print: Jun 1, 2022
Discussion open until: Sep 5, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.