Evaluating the Threshold for Corrosion-to-Fatigue Crack Transition Using a Corroded Steel Plate from an In-Service Bridge
Publication: Journal of Structural Engineering
Volume 148, Issue 6
Abstract
The linear elastic fracture mechanics (LEFM)–based approach has been widely applied to investigate the threshold for corrosion-to-fatigue crack transition in the corrosion fatigue process. However, investigations to determine the transition threshold of generally corroded steel are still insufficient. In the present study, the threshold for the corrosion-to-fatigue crack transition was investigated via fatigue testing of naturally corroded steel plates. The specimens were procured from the corroded U-ribs obtained from a cable-stayed bridge that has been in operation for more than 30 years. Profiles of the corroded surface were obtained via three-dimensional scanning. Stress intensity factor ranges and stress concentration factors were examined as potential indicators of a threshold for corrosion-to-fatigue crack transition. These factors, however, proved to be inappropriate. Modified stress intensity factor range was proposed to consider the shape-dependent effect of stress concentration from corrosion damage, and a consistent threshold of corrosion-to-fatigue crack transition was identified. These results are a novel finding whereby the corrosion-to-fatigue crack transition could occur when the modified stress intensity factor range exceeds .
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research was supported by a grant (21SCIP-B128568-05) from Smart Civil Infrastructure Research Program funded by the Ministry of Land, Infrastructure, and Transportation of the Korean government through the Institute of Construction and Environmental Engineering at Seoul National University. This research was also supported by the BK21 PLUS research program of the National Research Foundation of Korea.
References
AASHTO. 2020. AASHTO LRFD bridge design specifications. Washington, DC: AASHTO.
Albrecht, P., C. F. Shabshab, W. Li, and W. Wright. 1990. “Remaining fatigue strength of corroded steel beams.” In Proc., Int. Association for Bridge and Structural Engineering Workshop, 71–84. Zurich, Switzerland: International Association for Bridge and Structural Engineering.
Albrecht, P., and K. Yamada. 1977. “Rapid calculation of stress intensity factors.” J. Struct. Div. 103 (2): 377–389. https://doi.org/10.1061/JSDEAG.0004556.
An, L. S., Y. C. Park, and H. K. Kim. 2019. “A numerical study of the tensile stress concentration in a hemi-ellipsoidal corrosion pit on a plate.” Int. J. Steel Struct. 19 (2): 530–542. https://doi.org/10.1007/s13296-018-0134-7.
Barsom, J. M., and S. T. Rolfe. 1999. Fracture and fatigue control in structures: Applications of fracture mechanics. West Conshohocken, PA: ASTM.
Cerit, M., K. Genel, and S. Eksi. 2009. “Numerical investigation on stress concentration of corrosion pit.” Eng. Fail. Anal. 16 (7): 2467–2472. https://doi.org/10.1016/j.engfailanal.2009.04.004.
Chen, G. S., K. C. Wan, M. Gao, R. P. Wei, and T. H. Flournoy. 1996. “Transition from pitting to fatigue crack growth—Modeling of corrosion fatigue crack nucleation in a 2024-T3 aluminum alloy.” Mater. Sci. Eng. A 219 (1–2): 126–132. https://doi.org/10.1016/S0921-5093(96)10414-7.
Coca, O. C., and F. Javier. 2011. “Corrosion fatigue of road bridges: A review.” Int. J. Electrochem. Sci. 6 (10): 4915–4926.
Czarnecki, A. A., and A. S. Nowak. 2008. “Time-variant reliability profiles for steel girder bridges.” Struct. Saf. 30 (1): 49–64. https://doi.org/10.1016/j.strusafe.2006.05.002.
Deng, L., W. Yan, and L. Nie. 2019. “A simple corrosion fatigue design method for bridges considering the coupled corrosion-overloading effect.” Eng. Struct. 178 (Jan): 309–317. https://doi.org/10.1016/j.engstruct.2018.10.028.
Ebara, R. 2007. “Corrosion fatigue crack initiation in 12% chromium stainless steel.” Mater. Sci. Eng. A 468 (Nov): 109–113. https://doi.org/10.1016/j.msea.2006.09.128.
Ebara, R. 2010. “Corrosion fatigue crack initiation behavior of stainless steels.” Procedia Eng. 2 (1): 1297–1306. https://doi.org/10.1016/j.proeng.2010.03.141.
El Aghoury, I. M., and K. Galal. 2014. “Corrosion-fatigue strain-life model for steel bridge girders under various weathering conditions.” J. Struct. Eng. 140 (6): 04014026. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000992.
Hahin, C. 1994. Effects of corrosion and fatigue on the load-carrying capacity of structural and reinforcing steel. Washington, DC: Federal Highway Administration.
Hobbacher, A. 2016. Recommendations for fatigue design of welded joints and components. Berlin: Springer.
Hoeppner, D. W. 1979. Model for prediction of fatigue lives based upon a pitting corrosion fatigue process. West Conshohocken, PA: ASTM.
Hoeppner, D. W., and A. Taylor. 2011. Modeling pitting corrosion fatigue: Pit growth and pit/crack transition issues. Neuilly-sur-Seine, France: Research and Technology Organisation of North Atlantic Treaty Organisation.
KATS (Korean Agency for Technology and Standards). 2002. Test pieces for tensile test for metallic materials. KS B 0801. Chungcheongbuk-do, South Korea: KATS.
Kawai, S., and K. Kasai. 1985. “Considerations of allowable stress of corrosion fatigue (focused on the influence of pitting).” Fatigue Fract. Eng. Mater. Struct. 8 (2): 115–127. https://doi.org/10.1111/j.1460-2695.1985.tb01198.x.
Kayser, J. R., and A. S. Nowak. 1989. “Capacity loss due to corrosion in steel-girder bridges.” J. Struct. Eng. 115 (6): 1525–1537. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:6(1525).
Kim, H. S., K. K. Toledo, Y. S. Jeong, and I. T. Kim. 2020. “A simple approach for evaluating the stress concentration factor of a corroded surface using the fast Fourier transform.” Eng. Fail. Anal. 115 (Sep): 104612. https://doi.org/10.1016/j.engfailanal.2020.104612.
KMA (Korea Meteorological Administration). 2021. “KMA weather data service—Open MET data portal.” Accessed November 12, 2021. https://data.kma.go.kr/cmmn/main.do.
Kondo, Y. 1989. “Prediction of fatigue crack initiation life based on pit growth.” Corrosion 45 (1): 7–11. https://doi.org/10.5006/1.3577891.
Kreon Technologies. 2021. “Zephyr II blue.” Accessed January 17, 2021. https://kreon3d.com/3d-scanners/zephyr-ii-blue/.
Larrosa, N. O., R. Akid, and R. A. Ainsworth. 2018. “Corrosion-fatigue: A review of damage tolerance models.” Int. Mater. Rev. 63 (5): 283–308. https://doi.org/10.1080/09506608.2017.1375644.
Lindley, T. C., P. McIntyre, and P. J. Trant. 1982. “Fatigue-crack initiation at corrosion pits.” Metals Technol. 9 (1): 135–142. https://doi.org/10.1179/030716982803286403.
Newman, J. C., and I. S. Raju. 1984. Stress-intensity factor equations for cracks in three-dimensional finite bodies subjected to tension and bending loads. Washington, DC: National Aeronautics and Space Administration.
Pilkey, W. D., D. F. Pilkey, and Z. Bi. 2020. Peterson’s stress concentration factors. New York: Wiley.
Rokhlin, S. I., J. Kim, H. Nagy, and B. Zoofan. 1999. “Effect of pitting corrosion on fatigue crack initiation and fatigue life.” Eng. Fract. Mech. 62 (4–5): 425–444. https://doi.org/10.1016/S0013-7944(98)00101-5.
Sadananda, K., and A. K. Vasudevan. 2020. “Analysis of pit to crack transition under corrosion fatigue & the safe-life approach using the modified Kitagawa-Takahashi diagram.” Int. J. Fatigue 134 (Apr): 105471. https://doi.org/10.1016/j.ijfatigue.2020.105471.
Shi, P., and S. Mahadevan. 2001. “Damage tolerance approach for probabilistic pitting corrosion fatigue life prediction.” Eng. Fract. Mech. 68 (13): 1493–1507. https://doi.org/10.1016/S0013-7944(01)00041-8.
Shi, P., and S. Mahadevan. 2003. “Corrosion fatigue and multiple site damage reliability analysis.” Int. J. Fatigue 25 (6): 457–469. https://doi.org/10.1016/S0142-1123(03)00020-3.
Shreir, L. L., R. A. Jarman, and G. T. Burstein. 1994. Corrosion: Corrosion control. London: Butterworth-Heinemann.
Turnbull, A. 2014. “Corrosion pitting and environmentally assisted small crack growth.” Proc. R. Soc. A: Math. Phys. Eng. Sci. 470 (2169): 20140254. https://doi.org/10.1098/rspa.2014.0254.
Wang, Q. Y., R. M. Pidaparti, and M. J. Palakal. 2001. “Comparative study of corrosion-fatigue in aircraft materials.” AIAA J. 39 (2): 325–330. https://doi.org/10.2514/2.1308.
Xu, S. H., and Y. D. Wang. 2015. “Estimating the effects of corrosion pits on the fatigue life of steel plate based on the 3D profile.” Int. J. Fatigue 72 (9): 27–41. https://doi.org/10.1016/j.ijfatigue.2014.11.003.
Zettlemoyer, N., and J. W. Fisher. 1977. “Stress gradient correction factor for stress intensity at welded stiffeners and cover plates.” Welding J. 56 (12): 3938–3985.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Feb 15, 2021
Accepted: Jan 28, 2022
Published online: Apr 5, 2022
Published in print: Jun 1, 2022
Discussion open until: Sep 5, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.